This study deals with teachers ideas about the physical environment of a mobile preschool and how it affects children?s learning. The essay describes how the preschool bus is decorated and how a normal day works in the mobile bus. The survey was based on the following questions:Are there disadvantages and advantages in terms of physical environment in the mobile preschool from an educator based perspective?What are the teacher?s thoughts about the impact on children?s learning in terms of the physical environment on the bus?Summary: To answer my questions I have participated in activities during the day and I have used the interviews to find out the teachers thoughts.

The current demanding business environment requires corporations to act fast in finding effective solutions to problems given the myriad of challenges they face (Dyllick & Hockerts, 2001). The challenges include the impact of climate change on business practices, natural resource consumption, chemical pollution, technological change etc. Moreover, the forces of globalization, heightened concerns about the deteriorating quality of the physical environment and increased stakeholder power are also increasingly having a real influence on business practices (Rainey, 2008). Since 1992, the World Business Council for Sustainable Development (WBCSD) has encouraged the adoption of the concept of ecological efficiency (eco-efficiency) to support business efforts aimed at addressing some of these challenges. The aim of eco-efficiency is to reduce the amount of energy and materials used in production processes to achieve economic and environmental benefits (WBCSD, 2000).

Abstract  The purpose of this essay was to study understandings, determine the meening of a good learning environment in the school class, and how teachers and principal can contribute to it. On the basis of existing research that says: the common attitudes and standpoints between the school management and the teachers, is fundamental in case a good learning environment will occur in the classroom, the study has analyzed if the principal?s and the teacher?s attitudes in this study, are the same. The study is based on four main questions:  What is a good learning environment, according to teachers, principal and existing research?  How can teachers and principal contribute to a good learning environment, according to teachers, principal and existing research?  Do the teacher?s and principal?s attitudes concerning what defines a good learning environment, agree?   Do the teacher?s and principal?s attitudes concerning how teachers and principal can contribute to a good learning environment, agree?  To reply to the purpose of the study, five qualitative interviews were made. The interviews were done with five teachers and one principal, working in the same school. Research and litterature of interest, has been read, and these are presented in this essay. The study result shows that the existing research gives a wide definition of what a good learning environment is, and how a teacher and principal can contribute to it.

In this study, we investigate various lighting applications in a virtual environment, where we compare between light based in naturalism (natural light) and pictorialism (artistic light). The purpose of this study is to gain further knowledge in lighting, which is increasingly important for game graphics. Theory are examined to gather information and recommendations on how to use various light settings that convey different emotions. We then use this information to illuminate the environment that we have built. The environment is presented in Unreal 4 for respondents who are allowed to move around freely in the environment.

The construction industry accounted for 19 % of all work-related fatalities in Sweden between 2010 and 2013. The exam report has been done to find out what underlying causes there are to the high number of fatalities and to the occupational statistics of the construction industry. Moreover it has been reviewed what improvements can be done to reduce accidents and fatalities in the construction industry. The report consists of a survey of statistics, laws and regulations affecting the work environment and of literature concerning the subject. It has been conducted an interview and a questionnaire survey at the construction company Asplunds Bygg and an interview with an inspector from the Work Environment Authority.

This study includes several purposes which are to describe the concept of working environment, explain who is responsible for its functioning and how the working environment should look like. Other purposes the study have is to investigate how the working environment is in both Swedish and the two investigated companies construction sites and to share some operators proposing measures for the shortcomings and problems that exist in the construction sector working environment. To achieve these purposes was a qualitative study made with unstructured observations, interviews and survey where three construction sites were observed. The result shows that the concept of the working environment cover many aspects and is essentially about the environment we live in and experience in our work and this environment can be both an indoor as an outdoor environment. In this work, the concept is divided into four areas; it is the physical, the ergonomic, the psychosocial and the chemical.

The paint market of today is a jungle whit an enormous range of different paint types; there all has different properties and different compositions, some with big influence on the environment and some whit less influence on the environment. It could even be difficult for an expert to always know what should be used on which surface and what would be the best out of the environmental point of view.This work is not intended as a total review of all the manufactures range of colours; only as a deeper dissertation about distemper paint in general, in particular Falu Red Paint. Whit focuses on the environmental issues.The work is especially for those who are ready to paint but don?t know what paint they should chose and people that has a interest in paint and environment, perhaps it also could be of interest for professional painters even when there probably isn?t any big news for them. The information is compiled from the Internet and downloaded brochures from the Internet..

The study examines the meaning of having a dog in the workplace of personnel who work with therapy. The purpose was to examine the personnel?s view of dogs in their work envi-ronment. The study uses two theories. One is ?psychosocial work environment? and the other theory used is ?symbolic interactionism?.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.

This is a project with the main purpose to create a visual identity and platform for the release of the new started record label Human vs Environment, by finding a form and logotype for the homepage and packaging of the first vinyl ep record by the artist Mr Kaizen. This has also been an exploratory work with the target to get a broader competence in the field of visual communication and increase my understanding of the designs communicative aspects of running a design project with an external partner from concept to finished product..

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

The main aim of this study was to investigate and compare different methods for the extraction of forest fuel from environments close to an archipelago. The study was based on relevant literature and published reports as well as personal communications. Forestry has traditionally been characterized by intense efforts to rationalize and mechanize the cutting technique used for timber and pulpwood. In line with the increasing importance of forestry, more concentrated efforts can be expected in the area of techniques and methods, especially for the above-mentioned product lines. In Sweden, forestry is of major importance and the Swedish economy and standard of living have mainly been created based on the revenues generated from it. Thus, it is vital that Swedish forests are harvested in an efficient and responsible manner. The demand for biofuel is growing and today accounts for 15% of total Swedish energy production, a share that will probably increase. This study is based on three research questions, which are described under the heading of Aim. The results reveal that the most profitable method for handling forest fuel is the traditional one, which is also the most commonly used method in southern Sweden, namely the stockpiling of logs in a clearing by means of forwarders followed by splintering at the place from where they will be distributed. Today, the high cost of barge transport required for the extraction of forest fuel in an archipelago environment renders such operations unprofitable.

In the EU there are EC Directives that Member States of EU should follow. Sweden has undertaken to transpose EC Directives regarding the working environment to Swedish Provisions.  In 4 April 2006, the European Commission had some criticism against the Swedish implementation of the Construction Sites Directive. The Swedish Work Environment Authority has in response to this criticism reworked the Work Environment Act and related provision about building and civil engineering work. The changes came into force 1 January 2009.These changes have resulted in some working methods and even new responsibility subjects must be reviewed. The purpose of this exam project was to investigate if contractors and clients in the construction sector, had have time to update themselves on this front and adapt to these changes.