The private sewage systems in Sweden releases around 600 tons of phosphorus per year, compared to about 350 tons from municipal sewage treatment plants, and they account for approximately 21% of the total anthropogenic discharge of phosphorus into Swedish waters. About 40% of Sweden's nearly 1 million private sewage systems are inferior with respect to emissions to surface and groundwater. The technology of small sewage plants is under development and knowledge of treatment effects for different solutions is poorly consolidated. Municipal authorities lack resources to keep up with the technologic development and assess the reliability of the treatment performances that suppliers report for their products. The thesis aims to conduct a market review and evaluation of wholly or partially prefabricated small sewage plants, to make it easier for municipalities and property owners to assess different technical solutions. The goal is a compilation of the products on the market, evaluated on the basis of the reliability of specified degrees of reduction.Information on sampling procedures and test results were collected through a questionnaire to all active suppliers and the responses were then used to classify the products.

In a condominium with two-apartment buildings, lies an area, formerly used as a playground, nowadays wasted and abandoned. The owner wanted to embellish the place and get a new use for it, preferably as a gathering- and feast-place. The work is described with focus on the construction with describing pictures and sketches. The production of the sketches is not reported more than that they are attached at the end of the paper. The practical work is done and documented.

During pulp and papermaking process a huge amount of water is used. The wastewater contains a large amount of pollutants and has to be treated before it reaches the recipient. In March 2004 a new bleaching plant was started up at SCA Graphic Sundsvall AB, Ortviken?s paper mill using peroxide. The production of bleached thermo mechanical pulp and thus the load to the wastewater plant increased.

Young stands in urban forests often lack a shrub layer, though shrubs play an important structural and biological role in forests. All layers interact with one another to form a multilayered stand, in which shrubs have a vital role.In this diploma thesis, theoretical models for forest dynamics are compared with four reference stands to detect factors, and principals for introduction of shrubs in young stands. In these stands four different ways of introduction were found. In one trees and shrubs were planted together at the same time. Shrubs spontaneous spread under a canopy of mature forest, in another.

Purpose: The purpose of this paper is to research and analyze how the establishment in new markets of small and medium Swedish fashion companies can be made more efficient from a network perspective. Methodology: The researchers have decided to take a phenomenological standpoint and undertake an exploratory study in order to gain understanding of the phenomenon of market entry and the use of networks. The researchers have chosen to undertake a qualitative study and to adopt an abductive approach. Two ?case companies? have been chosen which are Filippa K and House of Dagmar.

This project was led on behalf of Bombardier Transportation in Västerås, Sweden, incollaboration with KTH Stockholm and EPFL Lausanne. This project is connected to thedevelopment of a new and simplified tilt system for rail vehicles.Growing competition from other means of transportation has forced railway companiesthroughout the world to search for increased performances.Travelling time is the mostobvious performance indicator that may be improved by introducing high-speed trains.They require very large curve radii and long transitions curves not to impairridecomfort, another performance indicator. Building new tracks adapted to high speedtrains is very costly and can only be justified where the passenger base is large.Trains with the capability to tilt the carbodies inwards the curve is a more cost efficientalternative. The tilt inwards reduces thelateral force felt by the passengers allowing thetrain to pass curves at enhanced speed with maintained ride comfort but increases thefrequency ofmotion sickness.The benefits of tilting trains are improved speed capability in curves and enhancedpassengers comfort, but at higher buying and maintenance cost. As the conventionaltrains increase their speed in curves, the performance advantage of tilting trains isreduced while their prize is still kept significantly higher and constant.

In this essay I have been writing about the psychoanalyst Wilhelm Reich. It was written at the Library School in Borås as a contribution to the struggle of the maintenance of the free word. In the essay I have been concentrating on how Reich was received in Sweden from the publication of his first book 1927 to the year of 2000. The work started with a biographical chapter and a chapter about Reich's scientific development, which was divided into three phases: one psychoanalytical and Marxist, one physiological and biological and a third phase that makes a synthesis of these in a cosmological form. The analytic material has been books and articles from periodicals and papers.

High brand equity is a great asset for companies that operate their business in a free and competitive market. Brand equity can arise from both product-related and non-product related attributes and may be viewed from many different perspectives. This study examines which different attributes that contribute to enhance brand equity from customers point of view at the Swedish market for agricultural machinery. The study have been developed using a comprehensive literature search in order to investigate the field regarding brand equity and brand image. The literature review results in one product specific and one non-product specific approach in order to examine factors that contribute to enhanced brand equity. This takes the form as one survey-based approach regarding the non-product related attributes which is examined by interpreting the extra value added by different attributes.

Stormwater is surface runoff water that originates from precipitation or snowmelt and that on hardened surfaces prevents to infiltrate the ground. In city areas stormwater can consists of major amounts pollutants and when reaching a lake or watercourse it can cause damages on vegetation and animals. Therefore it is important to treat polluted stormwater before it reaches the recipient. The municipality of Örebro have since the 90ies an extensive work with treatment of stormwater in sedimentation ponds. A new stormwater treatment project is planned in an industrial estate in Skebäck, Örebro.

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

This thesis investigated if a combination of increased under colour removal (decreasing the total ink limit), normal andincreased density and modern FM-screening could be used to provide a visually better print on uncoated and coated paperin comparison with AM-screening using the same conditions.Two different test groups (one with graphic background, the other with no graphic background) were asked to a visuallyassess the quality of the prints presented in a pair comparison using a reference image.The results show that the FM-screening did not obtain any significant visual difference in comparison with AM-screening,regardless of paper types and density levels. In general however, prints on coated paper were graded higher..

Hemp has been used for textiles for a long time in history until it became illegal to grow in many countries in the 1930s. It is interesting from an environmental point of view because it doesn?t need any pesticides and in most locations it doesn?t need any irrigation either, compared to cotton, which normally requires big amounts of both pesticides and water for irrigation. Hemp is a bast fiber, which means that the fibers are located on the bast of the stem (on the outer layer of the stem). Therefore they cannot be spun directly, they have to be removed from the stem first.

The purpose of this study was to investigate how former pupils in a daycareschool experienced there stay, in relation to the ordinary school. The method we used was an qualitative interview study with former pupils of a daycareschool. We have analyzed the result with help of Goffmans theory about stigma, Beckers labeling theory, Antonovskys SOC (a Sense Of Coherence) concept and Gjaerums theory of controlling. After analyzing the results we came to the conclution that the pupils where stigmatized and labeled as deviants in the ordinary school whilst in the daycareschool they got an enhanced SOC and a feeling of control. Due to the daycareschool?s work with these pupils they no longer sees as stigmatized and labeled..

The aim of our study is to examine stepparents´experiences of their role in the new family, we also want to examine if the role as stepparent is affected to the role as a biological parent. Our study is based on six semi-structured interviews, with three stepmothers and three stepfathers.By using role theory and symbolic interactionism our results indicate the requirement of constant negotiation as well as acknowledging the need to consider the other familymembers, those you may not have chosen to live with.We can see that the division of responsibility is governed by what is best for the family - to make life as easy as possible. It is clear that many stepparent lack guidance in what is expected of them in their new role; howeverr, they have been able to grow into it.  .

Aims: Patient associations have been around for some time and research has shown that such associations can influence society, politics and how diagnoses are thought of. This study is a comparative analysis of two patient associations in Sweden. The first association called Attention represents people diagnosed with neuropsychiatric disorders such as ADHD. The other association called RSMH represents people diagnosed with mental illness such as depression. The aim of this study is to explore the social and political agenda of these associations and to explain their relation to biological, psychological and social models of explanation.Method and theory: The method used was a qualitative document analysis using documents produced by the associations themselves as well as documents from media and politics.