Stadsmodeller i 3D är en allt mer bidragande faktor inom GIS och vinster i tid för räddningstjänst vid användandet av 3D-GIS har påvisats. Arbetet presenterat i rapporten behandlar nätverksanalyser i 2D och 3D och har utförts på uppdrag av Gävle kommun.  Uppgiften har utförts med två huvudsakliga mål. Det första målet var att jämföra processtiderna för Dijkstras sökalgoritm mellan nätverk (ett mindre baserat på förvaltningshuset i Gävle och ett överdimensionerat nätverk) i 3D och motsvarande nätverk i 2D, för att sedan avgöra skillnaden. Det andra målet var att utveckla en applikation som tillåter vägledning i 3D för besökare från reception till önskad anställd och få rutten visualiserad i en 3D-modell. Arbetet har i huvudsak genomförts med ESRI ArcGIS Desktop 10 och ArcGIS Engine 10 Developer Kit.

Aquatic organisms are usually not exposed to single substances but rather to mixtures of toxicants in streams located in agricultural areas. The transport of pesticides used in the agricultural area in Sweden is monitored with continuous environmental supervision every year. During 2002-2008 an average of 10 pesticides were found in each sample and 40% of the samples contained substances with concentrations higher than the Water Quality Standards. Chemical risk management is normally based on single-test evaluations. A problem when assessing mixture toxicities is that the constituents and concentrations of pollutants in the environment vary greatly.

Injuries to the suspensory ligament represent a huge problem in equine veterinary medicine. As many of the affected horses are elite-competition athletes, there are high expectations on veterinarians to make these horses fully functional again. The suspensory ligament has several features which makes the healing process complicated. So far no treatment has shown to optimize the healing process. This has led to the testing of many new treatment methods, in order to find a consensus for the injury.

Banks have been some of the biggest operators on the market of business customers financing. When the Swedish Förmånsrättslagen was changed 2004 the banks became more restrictive to allow traditional bank loans. The change made it more difficult for customers to get their loans granted. For that reason customers had to find other forms of financing. Factoring is an alternative that means companies can mortage/sell their claim on customers to finance companies.

In my study, I have chosen to examine how the user interface and content must conform to design guidelines for responsive design makes it suitable for diverse desktop environment and for varied mobile platforms. The purpose of this study is to examine the extent recommended design guidelines based on scientific research has a positive impact on user performance and perception when using this study delivered hi-fi prototype. The goal of this study is to provide a Hi-Fi prototype with high usability that will introduce and inform the public about BrasilCine according specifications. Study findings from user testing and supplementary questionnaires show that the implemented technologies as design guidelines for responsive design and design features have a positive impact on user performance and perception. The study results are therefore relevant for further prototype development..

The tourism industry is a young industry in Sweden but important for the economy and a large part of the field is mountain tourism. Marketing a place is called destination marketing, which has become a huge phenomenon and an important part of efforts for promotion in the tourism industry. The entrepreneurs in the tourism industry are an important part, as these are a big part of the destination. Their marketing and communication becomes a force to reckon with in order to attract tourists to the area. The purpose of this study is to examine how entrepreneurs through destination marketing reach their target market and with the intention to identify marketing channels that the entrepreneur uses.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

When rubber equipment in a milking system ages, physical and chemical deterioration occurs and cracks, crevices, as well as deposits of organic and inorganic material is formed on the surface. Bacterial colonization can accumulate, especially on ageing rubber equipment and if the cleaning procedure is not functioning properly. Formation of biofilm in milking equipment could in turn cause bacterial contamination of bulk tank milk. ATP bioluminescence is a fast and easy way to determine the hygienic status of a surface based on its ATP content, and results are given in relative light units (RLU). The method measures both bacterial contamination as well as residues from other organic material.

Sport horses are widely used for performance in jumping, dressage, endurance etc. To enable comparisons of horses, training facilities, programs or physical status, an exercise test can be used. Exercise tests are also important to increase knowledge about exercise physiology of the horse considering different ways of training to compare training methods or individual qualities, development of an individual or other investigations of equine exercise physiology. Since several investigations are done on standard- and thoroughbred horses but less on sport horses, it is of great importance to get an overview of the investigations done. Most common is to investigate heart rate and lactate concentration.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

This thesis aims to discuss how an information system and its users may adapt to each other. The main discussion is how to create an information system that is adaptable without losing its organising properties. The thesis uses a holistic approach to the topic and the areas being dealt with are information architecture, interactive information retrieval and information searching. The practical work consisted of constructing a database for Autoliv?s Research and Development branch.

Simulation is a vital tool during development of JAS 39 Gripen, since money and time can be saved.The Auxiliary and Emergency Power System, AEPS, is a subsystem of the secondary power system in Gripen. It has the function of providing the aircraft with electrical and hydraulical power before activation and after deactivation of the main engine. The system also functions as backup in case of a safety critical problem in the main power supply system. The system basically consists of a control unit and an auxiliary gearbox. The gearbox is driven by an air turbine.

In published studies it is found that the fuel consumption on a forwarder is relatively constant, on time basis. A certain variation between different sizes of forwarders occurs as well as between different working elements. The aim of the study was to establish a forwarders comparatively fuel consumption when driving on road and in the terrain, loaded and unloaded, with high and low gear and with high and low speed as well as with hydrostatic and hydrodynamic transmission. A hypothesis was that low rpm gives lower fuel consumption on distance basic, at all trials. The test driving was made with a Hemek 750 which is a three geared hydrostatic machine and with a Hemek 700 which is a hydrodynamic machine with six gears.

The purpose of this degree project was to build laboratory equipment for a new course in power electronics that starts this autumn 2010 at Uppsala University. The equipment is intended for student labs and it covers the most important areas of the course including rectifying, buck-/boost-converters and PWM-modulation. It is built as one sealed unit where all the electronics are built-in but visible and it has a connection board where students safely can connect the different circuits. The project has advanced from theoretical studies of circuit design, choosing of components and simulations to drawing the printed circuit board (PCB), soldering, case building, final testing and troubleshooting - basically most steps from an early idea to a final product. Measurements on the final product gave about the same results as the earlier simulations of the circuits and the result is overall satisfying..

The Thesis purpose is in the context of system development validate the Scrum Methodology. Projects concerning information technology are difficult to manage and tend to fail in quality, time or costs. Scrum presents a new view of the system development. Better cooperation between customers and developers, continuous follow-up on daily basis and extensive communication in the development team are all characteristics of Scrum. Scrum is described as a new paradigm by its founders but has been criticized by experts of system development too.