In this report focus is put on the combustion process at a cement plant. Combustion is the heart of the cement making process and absolutely crucial to have under full control and well optimized. The fuel is put into the process through a burner pipe and this burner pipe is modified to reach a more efficient combustion. The primary target is to enable burning of heterogeneous alternative fuels and increase the production level. Other positive effects from this type of optimization is lowered specific fuel consumption and lowered CO2 emissions. A redundant burner is chosen for the project and overall the project steps are the following: 1. Installing a Jet air nozzle ring in a way so it can move both axially and radially due to temperature changes. 2.

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

In the report we have investigated four high-rise buildings with the intentions to find out witch parts are prefabricated and what relation can be found between structural design, prefabrication and the logistics. After the investigation we noticed that the grad of prefabrication in each one of the projects is good in relation to what purpose the building have and the given background. During the report we found that layout ? structural design ? prefabrication ? logistics is an order that we think can make the production of the building more effective if followed. We believe that the prefabrication of high-rise buildings have potential to grow and get more optimized in the future..

?A culture center should be visually welcoming as well as attract a diverse range of visitors with different backgrounds.? This was the client?s request for a new cultural center in Nairobi. The location is in the heart of Nairobi?s industrial area, near several existing buildings that are already in use by the culture organization known as Go Down. I have chosen to keep most of the existing buildings and to use my new building as a complement for the desired program.

Projektet avser att undersöka hur en byggnad som ska möta en divers användning i urban miljö kan dela på resurser. Projektet avser att fungera som en tvärprogrammerad yta där olika användare växelverkar med sina aktiviteter över dygnets timmar likt ett stafettlopp där avlämningen blir en spännande kontaktyta. De kommersiella aktiviteterna över dagen ska samtidigt kunna fungera som allmän service på kvällstid. Kontaktytan för detta ska verka främjande för spontan social kontakt för både boende passerande och arbetande..

Cost allocation ? a study of how Swedish energy companies allocate costs between electricity and district heating in a combined heat and power plant District heating is today the most utilized alternative for heating in Sweden. In a combined heat and power plant (CHP) electricity and heat are cogenerated. The environmental and economic advantages with this kind of production are high. A problem in a CHP-plant is to allocate costs between electricity and heat since both products are generated in the same process.

This is a master thesis work carried out at the Department of Energy and Environment atthe Division of Electric Power Engineering. The master thesis work describes the theoryof distance protection relaying in 130 kV meshed distribution networks. The main aim ofthe thesis was to construct an Excel application for calculation and documentation of thesettings for distance protection relays. The program is based on general methods forcalculating settings of the different zones for the distance relay and presents the settingsin simple graphics using quadrilateral characteristics.The reason for building an Excel based application is the great variety of distanceprotection relays in live networks. The manufacturers of distance protection relays makeprogram for documentation available, however, they are based on the typical settings forthe specific relays.

This report will try to evaluate the use of rented concrete casting moulds, which are used to build walls and system of joists. The evaluation is only examining the economical aspects.The cost of using concrete casting moulds is a big part of the total production expenses. Therefore it is important that the calculated price not exceeds the final costs of the casting moulds. The calculated price is the price used in the process of making an offer.The evaluation consists of a comparison of the calculated price and the final costs for three building projects. It also evaluates the exploitation of the concrete casting moulds for each project.The report is made by Sven Gynne and Anders Alexandersson at School of Engineering, Jonkoping University, in cooperation with PEAB Jonkoping.

The purpose of the study was to investigate how inventories of suspected polluted areas as a part of the planned control of existing companies cab be designed in order to achieve as great effect as possible. The study was conducted in cooperation with Piteå municipality. An analysis of regional inventory projects, local municipal strategies and a pilot study in Piteå was conducted. The experience from both the regional projects and the pilot study was that in order to achieve an effective control a number of factors were inportant: an efficient selection of companies, a good dialogue between the controlling agency and the companies, sufficient resources, education of municipal inspectors and guidance for decisionmaking. Another inportant result was that the municipal planning can prevent an efficient inventory if the control of city development projects is allowed to take time from the planned control.

Mobile devices such as tablets and smartphones are quite common in this day. The author of this thesis wanted to know how common these mobile devices are in the building industry and how they are used and what potential an app could have. The author thus conducted an investigation on this matter, mainly in the form of interviews.Answers given by the interviews were then used as a basis to survey the usage of mobile devices and the usage of different kinds of apps. An investigation of different apps with the potential to be used by professionals in the building industry has been carried through. Apps which manage such things as scanning documents, measuring distances and handle communication.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

AbstractThe purpose of project is to study the possibility for Borås Energy & Environment to build and run a commercial ethanol production facility in Borås. The project also studies the technology for the production of ethanol using renewable energy, e.g. lignocelluloses with focus on two processes, svag-syra hydrolyse and enzymatic hydrolyse. The technology of the process is based of hydrolysation of biomass (hemicelluloses and cellulose) to sugar and extract it to ethanol. These two techniques will compare with each other to determine which of them that it?s more suitable for ethanol production.

The power consumption has grown rapidlyin the last decade. Fossil fuels and theneed for alternative energy sources aregreat. Ocean waves are a renewable andsustainable source of energy that hasbeen relatively untapped. At UppsalaUniversity research and development havebeen done for several years. Severaltypes of wave energy converters (WEC)have been created.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.