The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

AbstractThe dependency of fossil fuels in the transport sector causes large emissions of carbondioxide. This problem can we reduce by using vehicle gas from digested solid manure and leftover of pasture. I have studied the potential for this in the county of Västernorrland. Thepurpose is to investigate how much vehicle gas that can be extracted.One central, large scale digestion and upgrade plant should be placed in Härnösand. Theamount of pasture and manure that is economical and practical available is enough to produce2,7-3,5 millions Nm3 vehicle gas.

The aim of the study was to look at the differences in groups in Karlskrona Kommun in comparison to a larger population of work-groups in Sweden. The instrument used was the Team Diagnostic Survey developed by Ruth Wageman, J. Richard Hackman and Erin Lehman (2005) in order to diagnose the strengths and weaknesses in work-groups, as well as explore the group?s behaviours and effectiveness. The results show that there was a significant difference between the Karlskrona Kommun groups and the larger population of Swedish groups in the following areas: stable, clarity, challenge, diversity, whole task, resources and availability..

Today many companies and municipalities requires that their suppliers should have an environmental management system to work by. This might be one of the reasons to the increasing number of companies that today are implementing environmental management systems. Care of Haus is one of the companies that thinks that the benefits are bigger than the disadvantages, when it comes to environmental management systems, therefore they have made the choice to work with ISO 14001.The ISO 14001 standard is deified on the PDCA- cycle. PDCA stands for Plan, do check and act. Care of Haus choose to work with the ISO 14001 standard since it is a well-known standard for the companies that?s Care of Haus collaborates with and it is also well-known within their clienteleWithin this report an environmental investigation has been made.

The cocoa produced in Fiji is exported to industrialized countries for processing of the raw material. The Swedish organization Cocoa Bello is involved in a project to provide the Fijian cocoa farmers with knowledge as well as resources to enable local processing and to attain added value of the cocoa crop. The purpose of this study is to discover a field of application for the Fijian cocoa among the rural population, using an ethnographic design. We spent one week in Namau Settlement, Fiji, where we applied in-depth interviews and participant obser-vations in six families. We found a number of aspects affecting food choices, such as social, economical and cultural beliefs.

Wastewater handling of private sewage systems has become an all increasing matter. In Stockholm region the 90 000 private sewage systems contribute with larger phosphorus flows to the Baltic Sea than the two biggest sewage plants in the area, Henriksdal and Käppala, contribute together, even though these two plants purify wastewater from more than one million inhabitants. When summer house areas turn into areas for permanent living ? transition areas ? the load on the existing systems increases, systems that already often are unsatisfying. In those areas it is not clear what the best system choice is; On-site systems for single households; Local collective systems or Connection to central systems.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Energy losses are an essential part of a power grid company?s costs. From anenvironmental and economic perspective, it is important to reduce these costs. Toknow where efforts should be deployed, it is important to have good knowledge ofwhere in the network losses are situated. When creating network tariffs, there is alsonecessary to have a correct distribution such that the network customers that use acertain part of the network, only pays for the network losses in this area.

The world?s growing need for energy together with a desire to ward off the worst consequences of global climate change has resulted in a never seen desire to invest resources in renewable energy sources. Biogas production through anaerobic digestion is one of those growing energy sources. In Sweden there are over two hundred plants that uses this biological process to break down organic substances while producing carbon dioxide and the energy-rich gas methane.This master?s thesis has focused on development of the mixture of different organic substances that is treated at a specific plant, namely Mosserud biogas plant.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Osteoporos eller benskörhet, är en folksjukdom som vanligen inträffar i samband med åldrandet. För att kunna diagnostisera, upptäcka och följa frakturrisk i god tid är det bra om en bentäthetsmätning görs. Bentäthetsmätning eller bendensitometri utnyttjar metoden Dual energy x-ray absorptiometry (DXA). För att kunna bedöma metodens reproducerbarhet rekommenderas att periodvis genomföra en kvalitetssäkring vid bentäthetsmätning, eftersom det är en kvantitativ mätning. Syftet med studien var att kvalitetssäkra metoden för bentäthetsmätning.

The first commercially produced wind turbines in Sweden are starting to reach theend of their lifetime after approximately 25 years of producing energy. The cost fordismantling the turbines, according to Ardefors et al. (2009), is calculated to be 1-2 %of the total investment of the wind turbines. The purpose of this master thesis is tomap the dismantling process of wind turbines in Sweden and try to find a sustainablesolution for the future.To make sure that a correct dismantling process takes place, and that the financialaspect is covered, a proposal for a financial guarantee is worked upon. A nationalunanimity will be created through a financial guarantee and the risk will be minimalof a third party getting afflicted.Studies of literature and interviews have been carried out.

The aim of the study was to look at the differences in groups in Karlskrona Kommun in comparison to a larger population of work-groups in Sweden. The instrument used was the Team Diagnostic Survey developed by Ruth Wageman, J. Richard Hackman and Erin Lehman (2005) in order to diagnose the strengths and weaknesses in work-groups, as well as explore the group?s behaviours and effectiveness. The results show that there was a significant difference between the Karlskrona Kommun groups and the larger population of Swedish groups in the following areas: stable, clarity, challenge, diversity, whole task, resources and availability..