Today many companies and municipalities requires that their suppliers should have an environmental management system to work by. This might be one of the reasons to the increasing number of companies that today are implementing environmental management systems. Care of Haus is one of the companies that thinks that the benefits are bigger than the disadvantages, when it comes to environmental management systems, therefore they have made the choice to work with ISO 14001.The ISO 14001 standard is deified on the PDCA- cycle. PDCA stands for Plan, do check and act. Care of Haus choose to work with the ISO 14001 standard since it is a well-known standard for the companies that?s Care of Haus collaborates with and it is also well-known within their clienteleWithin this report an environmental investigation has been made.

Wastewater handling of private sewage systems has become an all increasing matter. In Stockholm region the 90 000 private sewage systems contribute with larger phosphorus flows to the Baltic Sea than the two biggest sewage plants in the area, Henriksdal and Käppala, contribute together, even though these two plants purify wastewater from more than one million inhabitants. When summer house areas turn into areas for permanent living ? transition areas ? the load on the existing systems increases, systems that already often are unsatisfying. In those areas it is not clear what the best system choice is; On-site systems for single households; Local collective systems or Connection to central systems.

AbstractTitle: Wireless Fidelity ? A Scenario Analysis Authors: Mellberg Ola, Technology Management, Lund UniversityMårtensson Jens, Technology Management, Lund University Tutors: Andersson Jens A, Faculty of Engineering LTHKarlberg Johan, Sony Ericsson Mobile Communication ABSvensson Claes, Lund University Discussion: The most significant impacts on the telecom industry over the past decades have been the rapid growth of the Internet and mobile telephone services. Currently these two worlds are converging. Moreover, the fast expansion of wireless high capacity Internet access, increased distribution of local/public hotspots and rapid development of wireless network cards have opened new opportunities for the mobile telecom industry. Research Questions:To what extent could the explosion of local and public wireless networks, using WiFi technology, affect the future telecom industry? Who will ultimately master the WiFi innovation and to what degree could this innovation open new possibilities for external players to enter the mobile voice industry? Purpose: The purpose of the Master Thesis is to provide Sony Ericsson Mobile Communication AB with the most transformational scenarios, which will enable employees to recognise patterns and interpret the meaning of WiFi-related events as they unfold.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Energy losses are an essential part of a power grid company?s costs. From anenvironmental and economic perspective, it is important to reduce these costs. Toknow where efforts should be deployed, it is important to have good knowledge ofwhere in the network losses are situated. When creating network tariffs, there is alsonecessary to have a correct distribution such that the network customers that use acertain part of the network, only pays for the network losses in this area.

Linux is a growing operating system in embedded systems. Today, Linux is not only in heavy servers but also in cell phones, PDAs, cameras and other devices running on battery power. While current technology is more energy efficient, more and more technologies are implemented into a single unit resulting in an overall increase of power consumption.Low power consumption is an increasingly important feature of a system today. Lower power consumption means lower costs, less environmental impact, and longer life for applications that runs on batteries.This work compiles methods to reduce power consumption of Linux systems. The work includes examining whether the available opportunities are platform-specific or of a more general nature.

The world?s growing need for energy together with a desire to ward off the worst consequences of global climate change has resulted in a never seen desire to invest resources in renewable energy sources. Biogas production through anaerobic digestion is one of those growing energy sources. In Sweden there are over two hundred plants that uses this biological process to break down organic substances while producing carbon dioxide and the energy-rich gas methane.This master?s thesis has focused on development of the mixture of different organic substances that is treated at a specific plant, namely Mosserud biogas plant.

In this Bachelor Thesis (20 p.), we present the history and development of "Intelligent Houses", and most important- explore some of the future possibilities in this area. The project has been carried out through an interdisciplinary cooperation between three different educations at the Blekinge Institute of Technology. By conducting a dialogue with various actors with different professions, we have been trying to identify needs within the concept of "Intelligent Houses", were the end user is not only the tenant or homeowner. Through Participatory Design methods, such as a Future Workshop, we have brought the users together to discuss their own and each others needs and hindrances in their respective work practice, and how intelligent house technology could improve their work conditions. We have also been testing a highly sophisticated CO/CO2/Moisture/Temperature/Enthalpy multi-sensor & controller, originally developed for regulating indoor climate systems. Based on the needs we have found in our fieldwork, we have been looking at possibilities to make multi user solutions with the sensor..

Osteoporos eller benskörhet, är en folksjukdom som vanligen inträffar i samband med åldrandet. För att kunna diagnostisera, upptäcka och följa frakturrisk i god tid är det bra om en bentäthetsmätning görs. Bentäthetsmätning eller bendensitometri utnyttjar metoden Dual energy x-ray absorptiometry (DXA). För att kunna bedöma metodens reproducerbarhet rekommenderas att periodvis genomföra en kvalitetssäkring vid bentäthetsmätning, eftersom det är en kvantitativ mätning. Syftet med studien var att kvalitetssäkra metoden för bentäthetsmätning.

As artificial intelligence (AI) has gained more influence in recruitment, both recruitment processes and the role of the recruiter are changing. This study aims to describe and analyze how recruiters translate, use, and relate to AI in their work. Through a qualitative method based on semi-structured interviews and document analysis, the study explores recruiters? experiences, attitudes, as well as perceived obstacles and opportunities regarding the use of AI in recruitment. With a theoretical foundation in translation theory, fashion, and imitation, the study examines how AI is not only followed as a trend, but also shaped and adapted locally through translation, depending on organizational identity and needs.

The first commercially produced wind turbines in Sweden are starting to reach theend of their lifetime after approximately 25 years of producing energy. The cost fordismantling the turbines, according to Ardefors et al. (2009), is calculated to be 1-2 %of the total investment of the wind turbines. The purpose of this master thesis is tomap the dismantling process of wind turbines in Sweden and try to find a sustainablesolution for the future.To make sure that a correct dismantling process takes place, and that the financialaspect is covered, a proposal for a financial guarantee is worked upon. A nationalunanimity will be created through a financial guarantee and the risk will be minimalof a third party getting afflicted.Studies of literature and interviews have been carried out.

AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andmanufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.