Life Cycle Cost, often abbreviated as LCC, is a common tool for comparing the total cost of different alternatives, such as heating and cooling methods. Common heating and cooling methods in Sweden are geothermal energy, district heating and district cooling. This report aims to evaluate how different heating and cooling methods differ from each other while being applied on three different types of buildings, using selected LCC-models. Information about the selected LCC-models wasretrieved from each separate model and its website. Reports and agencies were used as sources for information about the heating and cooling methods.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

This thesis is about new technology in academic libraries in the form of Patron Driven Acquisition. As libraries take part in the digital era, a new model of patron driven acquisition has emerged. This model gives users more influence over the libraries electronic book collection. The collection development model changes libraries traditional role in the collection development process, from collecting for the future to the present.The purpose of this thesis is to gain knowledge of what acquisition librarians think about the effects of PDA on the collection, the acquisitions role and the cost structure. The theoretical framework relies on Christensen?s theory about disruptive technology and was used to interpret outcomes of new technology in libraries and its staff.Five librarians from four different Swedish university libraries were interviewed using a qualitative semi-structured method to carry out the investigative part of this thesis.

In cooperate with Asko Cylinda we have developed a new heat system too short the processtime and reduce the energy consume in a dishwasher and still have it too be a class AAA.The environment and quality is important for the company too still be the number one onthe market, If they want too keep that position the product developed of new innovations willbe very important. The systems we have developed are more effective and reduce energy uptoo 25 %. The process time is reduced too less than two hours, from the today two andhalf-hour. The solutions are too heat up the rinse water and the dishwater at the same time,with a new heating system and it make are solutions unique and effective. Its good for thedish and the environment.

Title:The issue of unplanned stoppages caused by failure in medical technology equipment ? A study within the hospital of Kalmar with a focus on manage-ment, security and quality Author:Anna Förster, Ambika Linder, Sandra Nyqvist Tutor:Thomas Karlsson Institution:Linnaeus School of Business and Economics - Linnaeus University Kalmar Date:2011-01-14 Purpose:The purpose of this study was to examine unplanned stoppages caused by medical technology equipment failure in the healthcare operation within the hospital of Kalmar. Our study is based on a number of specifically selected incidents which show the consequences these disruptions cause in management, security and quality within the operation. Our intention was also to examine what role the medical technology department of the hospital plays in the care production operation during these unplanned stoppages. Method:Through a qualitative study we have generated material from a number of interviews with staff working in the hospital of Kalmar.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

To fulfill the climate target that EU and the Swedish government have decided to apply, it becomes increasingly important that the energy efficiency of existing buildings and making new buildings energy efficient as possible. Of Sweden?s total energy consumption in 2011 was 40% used by residential and service. Of the 40% of the energy consumption was 60% used for heating and domestic hot water. A report from year 2012 shows that one reason why the heating volume is so great could be due to underestimating on the energy consumption for the heating in the planning of the building.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

AbstractWe are interested in group meetings of the self-help group Alcoholic Anonymous and the emotional energy created therein. We examine which impact self-help group AA has on its group participants regarding: group meetings, dealing with alcoholism and identity. Group membership has great value for individuals; it provides social identity and possibility to self-value. Previous research shows that group members of self-help groups who have been sober for a period of time experience higher self-esteem and less anxiety compared to non-members. Our thesis is based on a hermeneutic approach.

This report is the result of an evaluation of a project, conducted by five regional libraries. Through a training course the project should inspire small and medium sized enterprises to use modern information technology and Internet when searching for information. To evaluate the project, qualitative interviews were conducted with five librarians and quantitative questionnaires were distributed to all the course participants. The evaluation shows that the project goals were met, apart from the number of course participants, which was much lower than anticipated. It also shows that the project resulted in an increase in information technology and competence at the libraries, and that the course participants profit from their increased knowledge in their daily work..

This thesis is based on a case study for the real estate manager Mimer in Västerås. Mimer provides a great deal of this city?s rental apartments. Many of their buildings have ventilation systems with a type of heat-recovery called ?heatpipe?.

This pilot study examined whether treatment with Vortex Process Technology (VPT) of the irrigation water used on tomato (Solanum lycopersicum) plants had any effect on plant growth. In a block experiment, with two blocks comprising 12 vases containing 1 L water and two tomato plantlets, treatment in which, nutrient solution was based on Vortex-treated water was compared with an control using untreated water. All vases were kept in a static aerated culture system in a daylight chamber for four weeks. The results showed that the effect of the two blocks exceeded the effect of vortex treatment in terms of leaf area and weight of fresh and dry matter. Plant height, stem width and internodal length were significantly different in tomato plants grown in Vortex-processed water compared with the untreated control.

This project operate an environmental assessment of total waste was conducted by using a life cycle assessment (LCA), that examines the environmental benefits of recycling production waste from Atlas Copco at Stena recycling. Atlas Copco is a company engaged in the development and production of rig-mounted hydraulic breakers and handheld air breakers and handheld motorized rotisserie. Stena recycling is a recycling company engaged in recycling, processing and refining of metals, paper, electronics waste and hazardous waste.The purpose of this study is to focus on Stena customer Atlas Copco and evaluate environmental benefits between to recycle and not to do it. The result shows that the total energy gain, resulting from the recycling of waste fractions, lands at 6 990 089 MJ, corresponding to drive 3 times around the Equator with a truck (40 t). The result shows that recycling 3040 kg paper provides an energy gain of (38 600 MJ) compared with burning paper (19 500 MJ) is 19 100 MJ, which corresponds to heat a house for 11 weeks.

Wind power is an energy source that is becoming increasingly popular in Sweden and around the world. The establishment of large wind farms supply and contributes to energy production within grid in search of a more sustainable energy production. Wind power is becoming more popular and opens up new areas of implementation. More cities are starting to use small-scale urban wind power, everything from full-scale work for a little less work adapted to the villas. Sweden has high goals regarding the production of green electricity and the work which deals with the conditions Sweden plays in achieving those goals.