It is self evident that our society is an information one. This is true from the things we see around us.The world is now a global village.It just take seconds for communication to be established from one part of the globe to another.What a tremendous achievement for information technology.Among the recent developments of information technology is the scientific wizardary of cyber medicine.The internet has definitely revolutionalised the healthcare industry. Many people in developed countries of the world seek medical information, advice or even buy drugs via the internet.So many websites rise every now and then claiming to provide various medical assistance to patients. But the application of information technology to medicine poses some ethical problems today. It is because of this that cyber medicine attracts my attention in this research.With this research, I hope to offer some recommendations for a morally acceptable cyber medicine .This will help to some extent in solving this all important problem ofcyber medicine for the good of the health care industry and the society at large..

Purpose/Aim: The purpose of this study was to investigate future marketing channels from the perspective of professional marketers.Material/Method: The study is based upon interviews with six professional marketers.Main results: Traditional marketing is not being put aside but needs to be combined with new methods. There are several new and exciting ways to gain attention from the audience, all depending on the purpose of the campaign. Mobile technology is considered upcoming and target group defining is a key issue..

The thermal response of a borehole field is often described by non?dimensional response factors called gfunctions.The g?function was firstly generated as a numerical solution based on SBM (Superposition BoreholeModel). An analytical approach, the FLS (Finite Line Source), is also accepted for generating the g?function. In thiswork the potential to numerically produce g?functions is studied for circular borehole fields using the commercialsoftware COMSOL.

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

The project was performed at SiemensIndustry Drive Technologies with theobjective to provide actual values forthe energy savings potential withinSiemens scope of practice.In Sweden the electrical drives standfor about 30 % of the total electricityconsumption and about 60 % of theelectricity consumption within theindustry. During the pre-study phaseelectrical drives with pump applicationswere identified as large energy users.Because of this a case study at one ofSiemens customers, Stora Enso Fors wasperformed. The system that was evaluatedduring the case study was a throttledsystem with a centrifugal pump forpumping pulp.The results yielded that a saving ofover 50 % could be achieved by replacingthe throttle valve with a variable speeddrive, a frequency converter. Thepayback period was two years and twomonths and the present value for thetotal life cycle cost of the variablespeed system was 662.566 SEK lower thanfor the throttled system. As aconsequence, Stora Enso Fors is advisedto invest in a frequency converter forregulation of the system.The general conclusion is that a focuson system efficiency is the mostimportant factor in energy efficiencyprojects and that the system regulationmethod has a large impact on the overallsystem losses and hence its efficiency.Energy efficiency potential forthrottled systems with centrifugal pumpsis large and significant economicalsavings can be made through investmentswith short payback time..

AbstractThe real estate sector is today responsible for 40 per cent of the total amount of energy consumption within the members of the EU. All over the world there are collaborations within research and projects to find ways of reducing the amount of energy consumed by the real estate sector. In Sweden, a directive from the European Union has posed demands on authorities as well as on the private sector to reduce the amount of energy consumed by new building constructions. Together with the directive from the EU there are also new requirements and demands from Boverket for the real estate sector.  These requirements mostly concern the energy consumption of kilowatt-hour per square metre and that the consumed energy also should be renewable.  The aim of this study is to explain what kind of value municipalities experience in using certifications and environmental investments for new and existing buildings. Within the chapter theory, essential areas are described such as; environmental certification systems, economical viability, proceeds connected to building green, difficulties with building green, the performance of green buildings when affected by the behaviour of tenants and customer value.  The following chapter describes the methodology with which we have conducted this study.

The business potential of software defined radio (SDR) technology is studied by evaluating whether or not its characteristics correspond to those particular to a disruptive technology. The maturity of the SDR technology concept is illuminated by analyzing the opinions and perspectives of a selection of representatives for different stakeholders in the wireless communications market. Characteristics as, for example, the degree of consensus about the utility of SDR technology and the awareness of features and limitations are studied by application of the theory of technological frames. This theory helps us understand how and when technology evolution takes place. Finally we describe the value network structures of some potentially viable application areas for SDR and suggest some possible business opportunities based on SDR technology.This thesis is carried out as a case study and the research data is obtained from secondary sources, such as literature and Internet publications as well as interviews with people well experienced in the field of wireless communications.

Science and technology has been the bedrock of human growth and dynamism. Man has over the years distinguished his existence from all other beings by his ability to champion and fashion his existence. Among his tools is biotechnology which actually attenuates the fears of aging and death.Human reproductive cloning stands out as one of the means through which biotechnology plans to achieve this perfect existence for man. Technological advancements in the field of biotechnology are now in the threshold of human procreation.Human reproductive cloning is seen as an assisted method of reproduction which creates a newborn that is genetically identical to another human being.Human reproductive cloning as a technology and as a means of reproduction is not without its pros and cons. In as much as the technology promises to mention but a few, hope for the infertile couples and single parents, as well as the hope of reproduction without passing on hereditary diseases; it at the same time beeps some flashes of worry.

All around the world more and more people move from rural areas to live in the cities. Because of this, the urban areas have become an important part in the debate about the effects on the environment and sustainability. In many countries word wide initiatives have been taken to build sustainable cities and eco cities, the Stockholm Royal Seaport is one example. The vision for the district is to become a world class sustainable city based on the three dimensions of sustainable development: social, economic and ecologic. The municipality of Stockholm has set requirements for the buildings? energy usage, emissions and amount of waste generated during the building process.

This thesis work is intended to analyze whether the municipalities has a need for the new technology of mobile mapping.Mobile mapping consists of the technologies of laser scanning, photographing and positioning of streets and roads in city environment and in the countryside. When these technologies are operating together a georeferenced three-dimensional image model is created, which has specific coordinates that states its position on the surface of the earth. Thanks to the laser scanning process even measuring can be performed in this model.The municipal sector consists of many different departments which use visual spatial information. These departments are an interesting target group for this system. Specific departments within the municipal sector, which we considered were the most suitable, have been selected.

The attention on environmental issues has never been as huge as today. The climate is changing and more and more evidence suggest that the cause behind climate changes is an increase of carbondioxide into the atmosphere. The increase in turn is considerd to be an act of human activity. Therefore some companies have decided to become climate neutral and implement information technology in their business in order to reduce their emissions. This thesis has three aimes: to calculate a small company´s carbondioxide emissions, study whether or not information technology could help to reduce these emissions and furthermore find out why some companies decided to become climate neutral and describe the concept climate neutral.

With a larger awareness of the climate changes and increasing electricity prices, energy efficiency measures in the industry have become more common. By rationalize the activity and by the same time decrease the emission of greenhouse gases the company can both save money and reduce negative environmental impact. For the Swedish industries the electricity price have traditional been relative low, which has resulted in a considerable larger usage than other European countries. By a deregulation of the European electricity market the electricity price will level off between the countries, which will cause a higher electricity price in Sweden than we are use to. To prevent that the Swedish industry don?t lose competitiveness against the other European countries, it will require energy efficiency activities in all different forms.ABB Sweden has decided to decrease their total energy usage with five percent in two years.

Along with rising energy prices and increasing awareness of environmental issues, the criteria for buildings energy performance have been sharpened through the years. Today, ?passive house? and ?low energy house? are commonly used phrases in the construction industry and is expected to become increasingly common in the future.For houses with well-insulated building envelope the importance of well constructed details increases when minimizing the heat losses. Examples of these details are floor-wall junction and window openings in the wall. In such connections thermal bridges occur, which means that heat more easily is transported out of the building, compared to the rest of the building envelope.This report deals with detail solutions around windows and a comparison between a traditional slab and a foundation from Koljern consisting of foam glass.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

In today's society there is a significant focus on energy efficiency. Despite this, people leave lamps, televisions and computer screens etc. powered on unnecessarily. The goal of this project is to build a simple prototype for home automation where a user, via an application on a mobile phone, can switch on and off the power of an electrical products in the home and as well as being able to check whether such products are switched on or off. The prototype will also collect data on power consumption for these electrical products.