In cooperate with Asko Cylinda we have developed a new heat system too short the process time and reduce the energy consume in a dishwasher and still have it too be a class AAA. The environment and quality is important for the company too still be the number one on the market, If they want too keep that position the product developed of new innovations will be very important. The systems we have developed are more effective and reduce energy up too 25 %. The process time is reduced too less than two hours, from the today two and half-hour. The solutions are too heat up the rinse water and the dishwater at the same time, with a new heating system and it make are solutions unique and effective. Its good for the dish and the environment.

Buildings worldwide account for 40 % of the total energy use. Climate change is of increasing importance, but few are willing to reduce their standard of living or get a higher cost for the change. Energy efficiency of existing buildings gives the greatest benefit economically and environmentally. The real estate company Klövern AB manages 46 properties in Karlstad. Heating is the major cost of the total operating costs of real estate. Rising energy prices increase the need for Klövern AB to improve energy efficiency and to investigate alternative sources of heat.

Husums plant has a selection of different pulp pumps at bleaching plant 4 and 5. The displacement- (HC-pump, Sund Defibrator PTD-60) and centrifugalpumps (MC-pump, MCA 42-200, MCP 30/20) are of interest in this report. The centrifugal pumps are controlled by throttle valves, which result in an energy loss. Chemical mixers are used to mix ClO2 into the pulp before proceeding into a holding tower where the bleaching process occurs.The energy demand of the different positions has been measured or calculated to be used in comparisons against new equipment. Quotations were requested and delivered from Valmet and Sulzer.

Mobile technology is developing quickly and becomming a part of daily life and communication. Bluetooth Low Energy is presented as a new way of mobile interaction. However there are not enough studies in this field on the interaction between mobile devices and the physical world. In order to understand user needs, and to encourage users to interact, we simulated an interaction process through designing and testing a prototype in a specific indoor environment. Prototype effectiveness and main characteristics for future mobile application was evaluated through a qualitative user study with 20 participants who interacted with our prototype..

Målet med detta arbete är att utveckla och utvärdera ett shadergrafsystem med stöd för ?era shaderspråk. Fokus ligger på implementationen av en prototyp och hur dess delar fungerar. Prototypen utvärderas med hjälp av ett par experiment för att se hur användbart systemet för datorspel. Experimenten visar att systemet kan användas istället för traditionellt handskrivna shaders och på så vis avlasta programmerare och ge mer kontroll till gra?ker..

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

This thesis paper discusses the results of a survey which was conducted to investigate the potential usefulness of mobile apps in the maintenance department at Perstorp Specialty Chemicals AB. The paper contains four sections, a theory section, a method section , a section that explains the functionality of the app, and finally a results section where the results and conclusions of the survey are discussed. The theory section explains and discusses relevant terminology used in the computer science field and in the maintenance industry. The theoretical model used in this paper is also discussed. The methods section gives a stepwise description of the project and a description of platform and software used.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area. The results show that use of locally installed renewable energy sources can reduce the total climate impact when life cycle perspective is applied.

This thesis paper discusses the results of a survey which was conducted to investigate the potential usefulness of mobile apps in the maintenance department at Perstorp Specialty Chemicals AB. The paper contains four sections, a theory section, a method section , a section that explains the functionality of the app, and finally a results section where the results and conclusions of the survey are discussed. The theory section explains and discusses relevant terminology used in the computer science field and in the maintenance industry. The theoretical model used in this paper is also discussed. The methods section gives a stepwise description of the project and a description of platform and software used.

I have in my thesis performed a survey that builds on interviews of five former students at Mediepedagogiskt Center (Mpc) that is located at Sundsta-Älvkullegymnasiet in Karlstad which is incorporated into Karlstads-Hammarö comprehensive upper secondary school. The sample group of students all has various withdrawal years between 1997 - 2004. The aim of the survey is to evaluate any direct qualities that these students have had that helped them to get a occupation within the media industry after the completion of their education at Mpc. This survey also tries to evaluate whether the orientation of their particular style of education is a factor for achieving employment. Before 1998 the course was divided into three A and B-level courses within the directions, photography, graphic design, text communication, sound production and film/television. After 1998 these are now divided into one A, B and C level courses, and one another level courses on A and B-level. The result shows that something more than? just? a good schooling with high grades is needed to succeed into getting a occupation within the media sector.

To achieve a sustainable development, three aspects have to take equal place in the society; environmental, economical and social. To reduce the impact on the environment and the amount of greenhouse gases supplied to the atmosphere, industrialized countries and less developed countries must start cooperating. Also the use of renewable energy sources, like solar, hydro and wind power, have to increase.Wind power has great potential as a future energy supply. It is cost efficient, quickly developed and the resource is abundant and available worldwide.Examinations made in Sweden, indicates that there are difficulties establishing wind power at the same pace as the environmental goals, set by the Swedish government, requires. Mainly because people living nearby potential areas for wind power farms, appeal against the decision.This study aims to investigate differences between how people in Sweden and Brazil look at wind power as a future energy source and at the establishing process.

Umeå Energi are working towards a goal, that in the year of 2018, they will be completely climate neutral. As a part of this, one target is to reduce their grid losses by 4 % of the 2012 level, which corresponds to an overall reduction of the grid losses of just over 1.7 GWh. In many residential areas, the distribution grid is designed and rated for electric heating as the heating in the houses. As many of the houses later has been converted to other types of heating, their electricity use has decreased and the total power output from many of the secondary substations has decreased significantly. Because of this, many of these stations today are well oversized, which in turn means that the energy losses in these stations are unnecessarily high.In this degree project, 25 secondary substations have been studied, all located in residential areas in and around central Umeå.

Den här rapporten har skrivits som en del av ett examensarbete på energiingenjörsprogrammet på Högskolan i Halmstad under våren 2014. Examensarbetet har genomförts i samarbete med AB Färdig Betong samt ÅF Infrastructure AB i Göteborg.Syftet med projektet är att undersöka energibesparingspotentialen hos AB Färdig Betongs produktionsanläggning på Ringön i Göteborg.Projektet har inneburit en energikartläggning av en industriell produktionsanläggning för lösbetong. Utgångspunkt för energikartläggningen har varit energiledningssystemet ISO 50001, med målsättningen att ta fram en teknisk energikartläggningsrapport i enlighet med standarden.Anläggningen har analyserats ur ett energibesparingsperspektiv. Data- och informationsinsamling samt mätningar har genomförts för att ta fram indata som beräkningsunderlag. Genom beräkningar har sedan möjliga energibesparingspotentialer och åtgärdsförslag tagits fram.Den totala energibesparingspotentialen för anläggningen innebär en besparing på 223 MWh av anläggningens totala energianvändning på 857 MWh år 2013, vilket motsvarar en minskning med omkring 26 %.Allmänna slutsatser är bland annat att all produktionsutrustning bör placeras inom klimatskalet, att all uppvärmning bör vara temperaturreglerad samt att ett mer långsiktigt energiperspektiv behövs i anläggningen.Energibesparingsmöjligheterna för anläggningen är mycket goda och investeringskostnaderna är i allmänhet låga..

AbstractThis report discusses how the intranet as a communication tool can bedeveloped to become a daily work tool. An intranet can help the organization to get information out to the employees fast, and the employees can choose when they want to take part of the information. This report also discusses how the functions and the presented information can be developed to be even better. The proposals has been developed out from information gathered from a survey,the people who has answered the survey has been given their point of view of the intranet, and also proposals for improvements, which we have implemented in to our theory part. There is no company or organization that uses the exact same intranet solution.