As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

This essay examines the environmental ideological direction of the Swedish parliamentary parties through the private members motions directed to the committee of industry and trade and the committee of environment and agriculture during the governmental time from 2002 to 2006.The environmental ideologies explained is anthropocentrism, ecocentrism and biocentrism. Based on the ideas of these three ideologies main points the private members motions directed to the committee of industry and trade and the committee of environment and agriculture, also matching the search words environment and energy, was compared and analysed.What has emerged is that all parliamentary parties express a desire to create an energy production and producing guide lines which are stringent environmentally and matches the safety requirements. Although the approach to environmental and safety standards differ significantly between them. Basically all Swedish parliamentary parties are more or less anthropocentric in its arguments, which in short terms means that they estimate natures and animals value through their usability for humans or based on their contribution to human feelings of wellbeing.The Centre Party and the Green Party shows hints of weak ecocentrism because in many cases they put animal intrinsic value high, but the human value higher. Moderates are predominantly anthropocentric but they also express some hint of biocentrism in one statement concerning research in order to reduce and rebuild environmentally destroyed areas.

Wind power is becoming an increasingly important source of energy. There are several national and international goals set to increase to amount of renewable energy, and in order to meet these goals, the wind power production plays an important part and the establishment of new wind power farms are required. The Swedish national project Riksintresse Vindbruk has appointed areas in Sweden suitable for wind power, mainly when looking at the physical wind conditions of the area. In this study, I aim to define suitable areas for wind power establishment in Norrbottens län. In order to reach this goal, a critical regional method was developed and completed using GIS.

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.

För att en kvalitativ och driftsäker kraftomvandling från vind till elkraft skall erhållas ställs krav på en mängd olika faktorer. Klimatologiska och tekniska faktorer kräver korrekt dimensionering och anpassning av omvandlingstekniken för att största möjliga energimängd skall kunna omvandlas på ett driftsäkert och energieffektivt vis som vindkraftsägare, nätägare kräver. Vinden är som bekant en oberäknelig kraftkälla. Variationerna i styrka och tid kan innebära en hel del driftoptimeringsproblematik med efterverkningar för vindkraftsverket, nätet och belastningen. Konsekvenserna kan bero på vilken typ av teknik som är installerad i de olika delarna av energisystemet och i områdets elnät.

The equine hoof is often manipulated in purpose to achieve a better stride or to reduce the weight on damaged tissue. The living tissue in the hoof can?t store energy as glycogen and is therefore depending on a continuous supply of glucose for its energy production. The purpose of the study was to determine if wedging (i.e. elevating) the heel could influence the hooves glucose and lactate consumption/production. Five standardbred horses were trained to trot on a treadmill without getting physical or mentally tired.

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

This report describes the building of a computer model that makes it possible to simulate the thermal climate in a greenhouse. The computer model is built on the physical theory of heat exchange that occur in a greenhouse, such as radiation and convective heat exchange. The model also includes the heat storage that is active in a greenhouse.The computer model is used to simulate the thermal climate in a greenhouse under three periods, winter, spring and summer. It also investigates which effect a concrete wall has on the thermal climate in a greenhouse. The purpose of putting a concrete wall in the greenhouse model is to investigate the possibility to store heat during the day and then use this heat when the temperature drops during the night.The result from the simulations shows that a concrete wall levels the big difference in temperature that normally occurs under a day in a greenhouse.

Pulp- and papermills expend vast amounts of water in order to produce pulp, paper and cardboard. Hence, they alsocreate vast amounts of waste water which has to be cleaned before it can be released into the receiving body of water. Insuch a wastewater treatment plant, tremendous amounts of energy are expended by the aeration in the biologicalcleaning process. This aeration is necessary to supply the microorganisms that shall decompose organic material withoxygen, which they need for their metabolism. The transfer of oxygen from the gas phase to the liquid phase isprimarily inhibited by surface-active substances in the waste water like resin acids or fatty acids.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

The representative democracy has become weakened during the last decades. At the same time the United Nations declared at the Rio de Janeiro meeting in 1992 that environmental problems can best be solved by involvement of all concerned citizens in decision-making. The main purpose of this study has been to examine if citizens panels is a possible way to involve citizens in environmental decision-making and what the outcomes can be. Furthermore the study has investigated what the participation has contributed to environmental politics and how representative the results have been. This has been carried out by investigating the Piteåpanel in the municipality of Piteå by conducting interviews.The result of the study shows that the involvement of the citizens in the decision-making influenced the environmental politics of the municipality.

The challenges facing low voltage grids are rising as an increasing number of domestic houses transition from fossil fueled heating to electricity based heating. Several environmental goals and visions have the same transition from fossil based power to electricity based power in mind for the transportation sector. One of the most important tools for this transformation is widely regarded to be the electric vehicle. With the demands of the electric vehicle pressuring the power grid, several questions arise regarding the growth of the electric vehicle market and what repercussions it may have on the grid. This paper focuses on a typical low voltage grid in southern Sweden and what effects a growing electric vehicle market may have on it. Through computer-assisted simulations based on several future scenarios regarding the EV market, this paper finds that few modifications and reinforcements are needed on this particular grid within the next 10 to 15 years.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

It has become more and more common that companies in the service sector are beginning to understand their own effect on the environment and thus the need to contribute to a sustainable development through acting in a deliberate way. Serious environmental work can help a company to improve their image and in that way win competitive advantage that leads to improved profitability. In a short time perspective, adjustment to the environment is an opportunity to gain competitive advantage and an opportunity to develop a profile. In a long time perspective it is about survival. The environmental work has become a sequel to the work with quality.

This study includes a life cycle assessment, LCA, on an ecological produced cotton shirt for the company Reflective Circle, which designs ethical and ecological clothes.Initially were cotton farming and textile production studied to gather basic knowledge about the processes. Since this shirt is being ecological produced in the whole production chain, we studied what an ecological production means, but also how a conventional production works. When this was done we could start to discuss the differences and similarities between the production of the shirt and general conventional production.When the LCA was first initiated, the main focus was on the green house gas emissions from the manure at the cultivation. Thereafter the process steps such as picking, ginning, carding, spinning, weaving and sewing were being studied. The picking is done by hand, but the rest of the processes are handed by machines which consumes energy.