This paper aims to explore the phenomenon urban wind energy, its visual effect on built environment and the factors that affect the opinion towards new elements in the city. A place study of the city Gävle serves as a complement to the theoretical part of the paper. The theoretical discussion opens with an account for the technical and economical conditions of urban wind energy. It presents the technical basics, different types of turbines and a discussion occurring wind related techniques in built environment. Today, the knowledge of how the wind moves and acts in the rural landscape is quite good.

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

A new material model, for the FE-program ADINA, has been verified against twoexperiments. One unreinforced concrete beam and one reinforced concrete beam.The model, DF-concrete, has the possibility to estimate true concrete. However theresults indicate that in order to be sure that the estimations are true, there ought tobe data from the true concrete to verify against.Two FE-models have simulated the behavior of a ring-shaped part of the nuclearcontainment vessel. The results from the first, frictionless, model agree with similarsimulations and hand calculations for high pressures in the containment vessel. Thesimulations of the nuclear containment vessel show cracking in the concrete after10-11 bars of over pressurization.

This essay examines the environmental ideological direction of the Swedish parliamentary parties through the private members motions directed to the committee of industry and trade and the committee of environment and agriculture during the governmental time from 2002 to 2006.The environmental ideologies explained is anthropocentrism, ecocentrism and biocentrism. Based on the ideas of these three ideologies main points the private members motions directed to the committee of industry and trade and the committee of environment and agriculture, also matching the search words environment and energy, was compared and analysed.What has emerged is that all parliamentary parties express a desire to create an energy production and producing guide lines which are stringent environmentally and matches the safety requirements. Although the approach to environmental and safety standards differ significantly between them. Basically all Swedish parliamentary parties are more or less anthropocentric in its arguments, which in short terms means that they estimate natures and animals value through their usability for humans or based on their contribution to human feelings of wellbeing.The Centre Party and the Green Party shows hints of weak ecocentrism because in many cases they put animal intrinsic value high, but the human value higher. Moderates are predominantly anthropocentric but they also express some hint of biocentrism in one statement concerning research in order to reduce and rebuild environmentally destroyed areas.

Wind power is becoming an increasingly important source of energy. There are several national and international goals set to increase to amount of renewable energy, and in order to meet these goals, the wind power production plays an important part and the establishment of new wind power farms are required. The Swedish national project Riksintresse Vindbruk has appointed areas in Sweden suitable for wind power, mainly when looking at the physical wind conditions of the area. In this study, I aim to define suitable areas for wind power establishment in Norrbottens län. In order to reach this goal, a critical regional method was developed and completed using GIS.

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.

För att en kvalitativ och driftsäker kraftomvandling från vind till elkraft skall erhållas ställs krav på en mängd olika faktorer. Klimatologiska och tekniska faktorer kräver korrekt dimensionering och anpassning av omvandlingstekniken för att största möjliga energimängd skall kunna omvandlas på ett driftsäkert och energieffektivt vis som vindkraftsägare, nätägare kräver. Vinden är som bekant en oberäknelig kraftkälla. Variationerna i styrka och tid kan innebära en hel del driftoptimeringsproblematik med efterverkningar för vindkraftsverket, nätet och belastningen. Konsekvenserna kan bero på vilken typ av teknik som är installerad i de olika delarna av energisystemet och i områdets elnät.

The equine hoof is often manipulated in purpose to achieve a better stride or to reduce the weight on damaged tissue. The living tissue in the hoof can?t store energy as glycogen and is therefore depending on a continuous supply of glucose for its energy production. The purpose of the study was to determine if wedging (i.e. elevating) the heel could influence the hooves glucose and lactate consumption/production. Five standardbred horses were trained to trot on a treadmill without getting physical or mentally tired.

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

The project Design analysis and proposals of plastic screw caps in Australia was performed at Högskolan Dalarna incooperation with University of Western Sydney, Australia. The Swedish company Tetra Pak, in Lund, were assigner forthe project that was performed 2006-2007. The commission was to do a survey about the packages for non-carbonateddrinks in Australia. The bottles had to be plastic, able to open in one step and with focus on the caps.The project has result in design analysis and a new proposal of a plastic screw cap for the Australian market. Sixbottles were choosen and they were all testet on 20 consumers each with a Likert-scale test.

Pulp- and papermills expend vast amounts of water in order to produce pulp, paper and cardboard. Hence, they alsocreate vast amounts of waste water which has to be cleaned before it can be released into the receiving body of water. Insuch a wastewater treatment plant, tremendous amounts of energy are expended by the aeration in the biologicalcleaning process. This aeration is necessary to supply the microorganisms that shall decompose organic material withoxygen, which they need for their metabolism. The transfer of oxygen from the gas phase to the liquid phase isprimarily inhibited by surface-active substances in the waste water like resin acids or fatty acids.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

The representative democracy has become weakened during the last decades. At the same time the United Nations declared at the Rio de Janeiro meeting in 1992 that environmental problems can best be solved by involvement of all concerned citizens in decision-making. The main purpose of this study has been to examine if citizens panels is a possible way to involve citizens in environmental decision-making and what the outcomes can be. Furthermore the study has investigated what the participation has contributed to environmental politics and how representative the results have been. This has been carried out by investigating the Piteåpanel in the municipality of Piteå by conducting interviews.The result of the study shows that the involvement of the citizens in the decision-making influenced the environmental politics of the municipality.

During the work at Gateway Security AB in Motala I began examining available antenna models to get a wider perspective, this have given knowledge of their structure, and an understanding of their function. All my necessary fact is based on my observations and notes of these measurings. New antenna models, and available models were examined where measurements at different heights and different distances on the antenna were performed with the help of an oscilloscope and a measure probe, peak ? to - peak was brought on the signal. The measurements are presented in a line diagram.

This thesis describes a system for dealing with free surface fluid simulations, and the components needed in order to construct such a system. It builds upon recent research, but in a computer graphics context the amount of available literature is limited and difficult to implement. Because of this, the text aims at providing a solid foundation of the mathematics needed, at explaining in greater detail the steps needed to solve the problem, and lastly at improving some aspects of the animation process as it has been described in earlier works. The aim of the system itself is to provide visually plausible renditions of animated fluids in three dimensions in a manner that allows it to be usable in a visual effects production context. The novel features described include a generalized interaction layer providing greater control to artists, a new way of dealing with moving objects that interact with the fluid and a method for adding source and drain capabilities..