The purpose of this study is to understand the factors that are affecting students at the Technology and Electricity- and energy programs in their choice of studies and vocation. The study is a comparative case study and quantitative method has been used in the form of questionnaires. The result shows that students do not like to be affected by another person but believes that they themselves have made their choice. Interest turns out to be the biggest influence factor of choice for both students at the Technology and Electricity- and energy program. For Electricity- and energy students have also access to work had some impact.The parents' education level was higher for Technician students and their parents worked with occupations requiring university degrees.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

This report is the product of the course AF101X, a bachelors degree in Samhällsbyggnad atKTH. The task of the course is to design a small house at a given location and also implement adeepening study. The house in this report is located in Kiruna in the north of Sweden, where theclimate is much colder than in the rest of the country.The deepening study of this report is to evaluates how realistic passive housing north of thePolar Circle is based on those facts. The house will to some extent be designed to fit the passivehousing standard.

In this thesis proposals for different designs of a borehole thermal energy storage (BTES) have been developed for the building DN-huset in Stockholm, Sweden. To build a BTES results in savings in energy costs by approximately 44 %, i.e. 2 million Swedish crowns annually. Furthermore, a BTES would reduce the annual environmental impact with roughly 75-157 tonnes of CO2 equivalents per year, depending on how the electricity consumption?s environmental impact is estimated.

ABSTRACTIn an intermediate section at a large university hospital are patients with subarachnoid hemorrhage (SAH) cared for. There are international, national and local guidelines how nutrition therapy should be implemented and how much energy each patient should be given when hospitalized. The purpose of this study was to examine the documentation and actions on nutrition in patients with SAH and to see if guidelines on nutrition were followed. The study was a quantitative, retrospective record review that was analyzed statistically and descriptive. 26 patients were included.

Today's high oil prices and more stringent environmental requirements have led to that manufacturers of mobile construction equipment try to make their products more energy efficient. With this in mind a project about hybridization of hydraulic systems has been formed. The purpose of this project was to analyze the savings that can be achieved by hybridization of hydraulic systems. A reach stacker truck (Kalmar DRD450-80S4XS) were simulated in some load cases with conventional hydraulic systems and with three types of hybridized hydraulic systems. Different parts of the hydraulic systems were also analyzed separately.

The fishing port of Bläsinge is located on the east coast of Öland, Sweden?s second largest island. Today the port has a limited supply of freshwater. The economic association of the fishing port wants to expand their business, so that they will also include tourist services. To do this the harbor will need a more independant source of freshwater, with a higher quality than the present well.

The aim of this study is to examine the understanding, preschool teachers, have about their work related to energy conversion in the human body. Through individual interviews, answers have been sought to the following questions: What do the preschool teachers believe they need to know about the link between food and energy? What are the different methods preschool teachers use to workwith the area of energy conversion in the human body?The results show that preschool teachers have knowledge in terms of food and its nutrients as an energy source for the body to cope with. However the more thorough and detailed questions become all the more uncertainty there is about the topic. Preschool teachers on their own initiative do bring up the topic with the children and begin conversations as well as ask questions, perform experiments and demonstrations.

The EU Council adopted in 2007, environmental and energy goals with the aim of them must be met by 2050. This, in combination with those of the Swedish government 15 enacted environmental goals is supposed to lead the way for the Swedish environmental work.This report has examined measures in properties in the Swedish Cooperative Housing Society (SKB) stocks.The report discusses a range of measures that might be appropriate to apply on the properties to make them more energy efficient.One of the measures discussed, the vent whose primary purpose is to create a good indoor environment for the residents but is also where the most energy is lost.Another measure discussed is insulation of the building envelope on the estate to make it more energy efficient. To put extra insulation on the building envelope is important because of the large amount of energy that is lost through the walls, ceilings and floors.Future actions that may be implemented is individual billing of heating and hot water. This system has been used in European countries since the 70's and today the EU wants to increase the own individuals control over their electricity costs. This has led to a discussion whether to implement the system in Sweden or not.However, there are a number of equitable measures to be sorted out before the system can be used in any great scale.Finally, it is important to remember that environmental measures should be the primary and the pursuit of cost reductions the secondary otherwise you risk the environmental work to be counterproductive..

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s roof is a gableroof, which has an angle of 24 degrees.

Detta examensarbete utreder möjligheterna att utveckla en energieffektiv luftningsstrategi i en aktivslamprocess. Arbetet innehåller först en litteraturstudie där forskningsläget gås igenom.Därefter följer en optimeringsstudie i Matlab, en simuleringsstudie i en förenklad variant av Benchmark Simulation Model No 1 (BSM1) och en redogörelse för ett fullskaleförsök vid Käppalaverket.  Resultaten från optimeringsstudien visar att, under vissa förutsättningar, är ett konstant luftflöde energioptimalt. Simuleringsstudierna visar att en minskning av energiförbrukningen på upp till 16%  kan uppnås, då luftflödet hålls konstant, jämfört med att hålla ett konstant ammoniumbörvärde. Preliminära resultat från fullskaleförsöken indikerar att ett konstant luftflöde kan minska luftförbrukningen men en längre utvärdering bör genomföras för att få mer tillförlitliga resultat.Slutsatsen från detta arbete är att den utvecklade metodiken kan vara intressanta alternativ till en överordnad reglering av ammoniumkoncentrationen och bör därför studeras vidare..

The first part of this essay is about a single-family house that we have planned and projected. Thesecond part is a deeper study in ways to further insulate windows when they are not in use.In the first part the building?s design and its most important construction elements are described.The planning of all major installations (heating, domestic water, ventilation, sanitation, electricity)are reported so that one can in principle start construction of the house. In addition there arecalculations done on the building?s energy management.The result is a two stored house angled toward the south.

Modelica is a multi-domain and equation-based modeling language. Modelica is based on object-oriented principles and non-causal modeling. The language is constructed to facilitate reuse and decompose models. The models and the modellibrary can modified to design a new nonlinear components.Object-oriented modeling is an excellent way to analyze and study large complex heterogeneous physical systems. The object-oriented modeling approach build on reusing and decomposition of models and non-causal modeling.Modeling physical systems often leads to a DAE system with index 2 or 3.

Svensk Växtkraft is the owner of the biogas plant in Västerås. The company is planning to increase their treatment capacity at their biogas plant. In connection to this work it is also possible to make some energy saving changes to the biogas plant. The objective of this study was therefore to make an electricity and heat survey of the biogas plant, a detailed study of the heat consumption in the sanitation step and also a comparison of energy consumption with the present sanitation method and an alternative strategy where the waste is treated in 55 °C during 10 hours (the current method is heating to 70 °C during 1 hour). The energy survey was conducted in close collaboration with staff at the biogas plant. The current during normal operation was measured, power was calculated and multiplied by the time of usage to obtain the energy consumed.

The municipality in Uppsala has set up goals for the future work concerning climate-and energy issues. As one way to achieve these goals the municipality started aproject called Uppsala climate protocol. During one of the project meetings anabatement map was presented. The map showed what savings in carbon dioxide andmarginal costs for different actions can be made. Statistics show that 40 % of thepopulation in Uppsala lives in a condominium.