Today all buildings contain some form of home automation. It might be heating controlled by athermostat or motion detectors controlling outdoor lighting.This paper,The Intelligent House, deals with the planning of a house in Kiruna, in the north ofSweden and further immerses itself in home automation or intelligent control in single-familyhomes. The house has been entirely planned, from layout to structural design and plumbing.The purpose of the paper has been to investigate the possibilities in home automation in singlefamilyhomes and to choose a suitable home automation system for the house being planned.The system has been designed and the costs and energy savings have been calculated.The system chosen for the house is called KNX and is the largest system for home automation inSweden. It is used to control heating, ventilation, lighting and alarm systems in the house. Is hasbeen found that KNX is very expensive and that the amount of energy, possible to save in thehouse, using the system, is relatively small.

Genom att studera olika kommunikationsprotokoll kunna svara på vad det är som gör att ett visst protokoll är bäst anpassat för att användas mellan mobila enheter och IoT-enheter.I arbetet användes en kvalitativ litteraturstudie för att ge en grundlig teoretisk bakgrund samt en experimentell studie där ett par teorier undersökts ifall de stämmer med resultaten ifrån verkligheten. De fem faktorerna kompatibilitet, batteritid, frekvens, räckvidd och tillförlitlighet undersöktes hos kommunikationsprotokollen Bluetooth Low Energy (BLE), Närfältskommunikation (NFC) och Wi-Fi. Dessa tre valdes eftersom de stöds av nyare mobila plattformar idag. Kommunikations-protokollen analyserades sedan gentemot olika användningsområden inom IoT, eftersom påståendet vad som är bäst anpassat beror på vad situationen kräver för egenskaper.En systemutvecklare som ska välja kommunikationsprotokoll till en IoT-tillämpning och läser denna rapport bör själv jämföra de olika protokollen mot varandra inom de fem faktorerna för att kunna avgöra vilket protokoll som passar bäst inom dennes situation. I arbetet utfördes endast experimentella studier på BLE på grund av begränsningar inom utrustningen.

Objective: The aim of this study was to compare equations used to calculate BMR to values of BMR obtained from measurements in order to determine the most suitable equation to be used on children and adolescents with CF.Design: The participants where children and adolescents with CF. Data was collected from the division of Clinical Nutrition at Uppsala Akademiska Sjukhus. Age, weight, height, BMI, BMR, FFM and FM was recorded from 27 measurements. BMR from the participants collected from the indirect respiratory calorimetry was compared to the results obtained from five equations used to obtain a calculated value of BMR.Results: Tverskayas equation was best correlated with the measured BMR for the whole group. The equation underestimated BMR for the participants with a measured BMR over 1400 kcal/24h and overestimated BMR for participants with a measured BMR under 1400 kcal/24h.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

Cooling down the indoor air can be done in several ways. One way is desiccantcooling which will be used at the Stockholm Arena. This method is used in airhandling units that use temperature changes and moisture fluctuations in the air. Oneof the steps is to add heat during the cooling process in order to reduce the relativehumidity of the exhaust air. The air passes thru an adsorptions rotor which thenabsorbs moisture from the supply air.

Among researchers it has been established since decades that humans and animals have an internal biological clock that controls certain physiological mechanisms. One example regarding humans is the impairment of lung function during the night, causing the phenomenon ?nocturnal asthma? among asthmatics. Only a few studies concerning respiratory circadian rhythm in horses have been done previously and they showed a daily variation in horses with a chronic or an acute respiratory disease. The technique used in those studies was the conventional technique, which is invasive and less sensitive than the technique used in this study.

Auditory Neuropathy Spectrum Disorder (ANSD) is a collective term for a specific form of hearing loss within a heterogeneous population of patients with mutual audiological test-profile. Cochlear implantation in children with ANSD has been found to result in good outcomes. Previous research, however, has shown the existence of a subgroup of children with ANSD who do not benefit from cochlear implantation but instead are in need of alternative methods of communication. The aim of this literature review was to examine the possibilities to predict outcomes of cochlear implantation in children with ANSD by pre-, intra- or postoperative examinations/measurements and thereby evaluate in which cases cochlear implantation is an appropriate intervention within this group of patients. The material consisted of 10 scientific papers published between 2007-2014.

Increased resource efficiency in an energy system could result in large economic and environmental benefits. Tekniska verken i Linköping AB (Tekniska verken) is responsible for the district heating network in Linköping. Their vision is to create the world?s most resource efficient region. An important step towards this vision is more efficient usage of produced heat, something which could be achieved through integration of a seasonal heat storage in the energy system.

In this thesis, the Train Power System Simulator (TPSS) has been compared and verified with the commercial simulator TracFeed® Simulation (TracFeed). The basis for the comparison was a given part of the Swedish railway system, with steel transportation trains. Primarily, emphasis was placed on running time and energy consumption in simulation results. Two transformer systems were analyzed, booster and auto transformers. The high voltage transmission line, parallel to the railroad track, was disconnected in some simulations.

The purpose of this study was to increase the level of knowledge in the field of Environmental Impact Assessment (EIA) for wind power. The study includes six wind power farms in the County of Västerbotten in northern Sweden. The main questions were: What are the real dimensions of roadways and land claims for both roads and wind power turbines? How do those dimensions correlate with the dimensions stated in the EIA? Are there any differences in values of the dimensions between the wind power farms that are included in this study? The width of the roadways and the land claims for both roads and wind turbines in wind power farms were examined on site. The results from the examinations were compared with the dimensions available in the EIA for each wind power farm.

The guest harbor on Utö, Utö Gästhamn, is currently using electricity for heating all of the water used in the showers and taps. Because of the large amount of visitors, especially during the summer months, the hot water usage gets very high and that is also the case for the electrical bills. During the year of 2011 the cost of electricity for Utö Gästhamn reached a total of 257 500 kr. Out of these 257 500 kr approximately 142 000 kr, 55 % of the total cost, were because of the water heating.The report is the result of a cooperation with Skärgårdsstiftelsen, the Green Islands-project and Utö Gästhamn where the mutual goal is to dimension a solar energy system, to promote the sustainable development.Initially the different techniques for the solar energy system are researched. The techniques are plane solar collectors, evacuated tube collectors, pool collectors and photovoltaic cells.

The aim of this study was to compare perceived disability in daily activities, anxiety and depression for patients with chronic pain (>3 month), before and after rehabilitation. Another aim was to examine if there were any correlations between disability in daily activities and the extent of anxiety and depression before and after rehabilitation.For the measurements, Disability Rating Index (DRI) that measures disability in daily activities, and Hospital Anxiety and Depression Scale (HADS) ) which measures the extent of anxiety and depression were used. The study was carried out with 50 patients who had suffered from chronic pain and with the objective to return to work after rehabilitation. Of these, 90 % were female. The measurements were carried out at three measure points; before rehabilitation, seven weeks after rehabilitation and one year after rehabilitation.The main result did not show any statistically significant improvement in ability to perform daily activities.The only significant difference that emerged was an improvement in anxiety seven weeks after rehabilitation compared with before.

This paper describes a method for wireless energy transfer via near-field electromagnetic inductionthat is inexpensive, simple and can be applied to almost any type of system, regardless of size andenergy demands.The method uses a primary unit consisting of an oscillator, amplifier and inductive coil thattransfers energy to a secondary unit consisting of a coil, rectifier and voltage regulator. Two typesof oscillators and several amplifier designs were realized and evaluated together with a multitudeof flat coils of both monofilar and bifilar type.The results show that it is important to use an oscillator whose frequency is dependent on theinductance of the connected transmission coil, such as the Colpitts oscillator. This is preferable toan oscillator with a preset frequency, such as a Schmitt-trigger oscillator..

In this thesis a possible cost effective runner change of some of the units in the hydroelectric power station Olidan is investigated. The possibility to drive a unit at the same efficiency point through a change of the turbine shaft speed and the rate of discharge is tested. Furthermore the theories behind model testing, determination of efficiency increase from model to prototype and efficiency measurements shall be discussed and analyzed with Olidan as a starting point.A predicted curve has been built on information from model tests and field measurements on the existing runners and runner data from the test of the new model. The predicted curve shows the difference in efficiency between an existing runner and a modern one. It is the difference in efficiency that is used in the calculations that are to show whether changing to a pair of new runners will be cost effective or not.

Suggestion for a new operahouse in stockholm, förslag på nytt operahus i stockholm. Stockholmsoperan..