The first part of this essay is about a single-family house that we have planned and projected. Thesecond part is a deeper study in ways to further insulate windows when they are not in use.In the first part the building?s design and its most important construction elements are described.The planning of all major installations (heating, domestic water, ventilation, sanitation, electricity)are reported so that one can in principle start construction of the house. In addition there arecalculations done on the building?s energy management.The result is a two stored house angled toward the south.

The objective of this study is to determine if and how Swedish businesses measure the efficiency of their purchasing departments.In this study I have interviewed six medium to large successful companies and asked them· Which ratios they use to measure the efficiency of their purchasing departments· Why they use these ratios and· How the results of these measurements are usedI can conclude that although there are no ratios or other measurements that directly measure the efficiency of purchasing indirect measures do exist.The measures applied are usually the result of demands from management and the results are reported back to management and used to follow development within a particular field of purchasing. Benchmarking, especially external benchmarking, is unusual..

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

Svensk Växtkraft is the owner of the biogas plant in Västerås. The company is planning to increase their treatment capacity at their biogas plant. In connection to this work it is also possible to make some energy saving changes to the biogas plant. The objective of this study was therefore to make an electricity and heat survey of the biogas plant, a detailed study of the heat consumption in the sanitation step and also a comparison of energy consumption with the present sanitation method and an alternative strategy where the waste is treated in 55 °C during 10 hours (the current method is heating to 70 °C during 1 hour). The energy survey was conducted in close collaboration with staff at the biogas plant. The current during normal operation was measured, power was calculated and multiplied by the time of usage to obtain the energy consumed.

The municipality in Uppsala has set up goals for the future work concerning climate-and energy issues. As one way to achieve these goals the municipality started aproject called Uppsala climate protocol. During one of the project meetings anabatement map was presented. The map showed what savings in carbon dioxide andmarginal costs for different actions can be made. Statistics show that 40 % of thepopulation in Uppsala lives in a condominium.

Sweden has long had access to low electricity prices due to the wide availability of hydro and nuclear power. This has now changed because of today's rising electricity rates resulting in increasing heating costs for properties, especially in the properties with electric heating systems."Ankaret" is a parish for "Svenska Alliansmissionen", which is located at "Gullbrannagården".The parish has installed electrical radiators and an exhaust ventilation system that makes the energy demand high due to the large ventilation flows. The building was built as the price of electricity was still low and would reduce energy use today by combining its heating system with an air/air heat pump. The heat pump delivers more heat into the room than the electrical energy that it uses. This lowers the electricity needs.

Arbetet går ut på att genomföra en miljö- och energianalys av två pressgrupper i processhallen. Detta innebär att dagens process skall analyseras för att se om man genom olika system kan göra arbetsklimatet bättre för operatörerna samtidigt som en besparing av energi möjliggörs..

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

The goal with this master thesis has been to evaluate and to examine the stationary resistance bridge. The resistance bridge uses a 4-point measuring to determinate the resistance, which is used in the manufacturing of the conductor. It is then used when the resistance is to be decided for coarser aluminium conductors. A conductor has to fulfil certain demands to be able to move forward in the process. One of these demands is the resistance in ohm/km, which has demands that the measure values of the resistance bridge are as true and precise as possible.

This thesis has been written with our society?s current energy-situation in mind.Although it only deals with one particular block of buildings, the solutions and suggestions presented herein are quite applicable on other objects of the same type.This thesis is intended to be used as a guideline for energy-preserving projects in general, with an eye to buildings erected during the Swedish ?million-programme? in the sixties and seventies.The paper starts with the acquiring of all necessary blueprints and technical specifications. It then moves on to a thorough description of the buildings in question, and their heating- and ventilation-systems.Followed by this the reader is guided through the successive stages of energy-perseverance measures that are available, and possible. Reasoning around the economic factors concerning all measures is also held.The paper ends with conclusion, and a discussion concerning the delicate issue of the higher return-temperatures possibly reaching the district-heating plant..

Uppsala County has ambitious environmental aims for the planned residential area inÖstra Sala backe. In this thesis different energy sources have been evaluated todetermine which system that would be most favorable given currently availableinformation about the project. Planned energy usage has been divided into tap waterheating, space heating and power. Three base case scenarios were made with districtheating, small scale bio fuel and heat pump. Solar power and solar heating were thensimulated and the production from the two could individually be deducted from theenergy need in the base cases, constituting 9 different scenarios.

The building sector accounted for around a fourth of the total energy usage in Sweden in year 2010 (Energimyndigheten, 2012). Therefore it has become very interesting to achieve a lower energy usage in residential buildings. One way to achieve that is to build so called passive houses. By being very well insulated and have low leakage through the walls, they can reduce the energy usage for heating with a substantial amount. The first passive house was built during the 90?s in Germany; and in Sweden the first passive house was built in Gothenburg 2001.

This master thesis is an in-depth study of an existing heating system at a household cooperative in Uppsala that has been converted from district heating to a bedrock heat pump system. The study focuses on an economical system optimisation of the building?s complete heating system. The aim was to determine how well a heat pump system in large buildings actually work, find out possible ways to optimize the existing system and point out important system parameters for new heat pump installations in larger buildings.The project points out a possible energy cost reduction of 45 % without investment and further cost reductions with equipment investments. A reduction by 30 % is possible by improvements in the regulation system and 15 % is possible by maintaining the brine system.

1st of may 2003, a new energy system based on electricity certificates, was initiated in Sweden. The purpose with this system, is to stimulate an enlargement of energy production from renewable sources. The electricity system, ist built on that the producers of energy from renewable sources confer a electricity certificate from the government for every produced MW energy from renewable sources. The electricity certificate is supposed to be turned over and with that generate reciepts to the producers. Furthermore there is an obligation for the energyusers und energysuppliers, that means that the users and the suppliers every year the 1st of april got to have electricity certificates in proportion to their energy consumption during previous year.

The project group is participating in a measuring project that is a cooperation between CIT EnergyManagement AB, the Measuring unit of Chalmers and College of Dalarna.The results from the measurementswill be put together and presented in a brochure.When designing the brochure a great deal of planning has been made how to attract the targetgroup.To make the contents of the brochure more attractive, which mainly will contain text, a lot of imageswith a symbolic substance have been used. To keep the brochure together it has been divided into fivechapters that each has been given one specific colour. The colours are consistent on initials, headlinesand images.At the moment the results of the measurements are not yet ready and the text for the brochure is notpossible to complete now. This project is expected to finish in the fall when all the measurements havebeen compiled..