Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

In Uppsala CHP Plant, there are six pressure reducing valves to reduce the pressure from 15 to 3 bars, before six absorption heat pumps. During the process the energy is conserved but losses occur in form of exergy. The aim of this thesis is to reduce the losses of exergy. This can be done by letting turbines replace the pressure reducing valves.In this thesis an investigation has been done of the conditions today, the conditions after the change from pressure reducing valves to turbines and a comparison of three different types of turbine solutions. The three examined solutions are one turbine, several helical screw expanders and several small turbines in parallel with asynchronous generators.The six absorption heat pumps have been divided into two groups; one group of four and one group of two absorption heat pumps.

The purpose of the present quantitative study was to examine gender differences inperceived job satisfaction in two departments, with different work patterns, in a Swedishmanufacturing industry. The questionnaire contained 30 statements and five backgroundquestions. The questionnaire was designed in combination of Job Satisfaction Survey (JSS),Work demands, Social support, Control and Competence (ASK), Questionnaire forPsychological and Social factors at Work (QPS Nordic) and Minnesota SatisfactionQuestionnaire (MSQ). Job satisfaction was measured based on the categories influence atwork, leadership, employee influence, work requirements and the physical environment. Theresults of the present study showed an interaction of gender and department where the femaleindustrial workers, who worked with more monotonous and standardized work tasks, valuedall of the categories of job satisfaction the lowest, except for the category employee impact.The results are believed to depend on that the women in the department had greater demandsfor variety in the work..

The number of firms adapting the concept of Corporate Social Responsibility is constantly growing. It is no longer enough only to supply your customers with demanded products and services since todays? customers have an increased awareness and are demanding more transparence when it comes to the manufacturing and responsibility for society.Along with a growing interest in social, ethical and environmental matters, many firms have received critique, consequently forcing them to start taking more responsibility for their activities. The clothing industry was among the first to get critized and therefore early in starting their work with CSR.The purpose of this paper is to investigate how firms in the clothing industry work with CSR today, and also how they choose to communicate this work, both internally and externally. The methodology of the paper is qualitative and aims to deeply investigate four different firms, along with an additional interview with a CSR-consult from one of the leading communication-firms in Sweden.The theoretical foundation includes a frame of reference around CSR and the communication thereof, and also a few relevant theories around CSR and business ethics.After analyzing the empirical material the paper have reached a few conclusions.

Work, especially that in complex, dynamic workplaces, often requires subtle, local judgment with regard to timing of subtasks, relevance, importance, prioritization and so forth. Still, people in Nuclear Industry seem to think safety results from people just following procedures. In the wake of failure it can be tempting to introduce new procedures and an even stricter "rule following culture". None, or at least very little, attention is given to tacit knowledge and individual skills. I am aiming to highlight the inadequacy of putting too much trust in formalization and that reporting and trending of events will contribute to increased learning, an increased nuclear safety and an efficient operational experience.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Landskapsvårdens hantverk, 15 hp, 2012.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

Background: It has been shown that EDI can yield positive effects within companies. Which effects are possible for a company to direct assign to the introduction of EDI and is it possible to estimate the total effect.Purpose: The purpose of this study is to estimate and analyze the effects of using EDI in electronic business. We also want to contribute with a model for measure and estimate the effects of EDI.Accomplishment: We have studied literature concering EDI and realized a preliminary studie in form of interviews with experts to establish deeper knowledge of EDI. We have also tried to estimate the effects obtained in companies in three different businesses, power, government and transport industry.Result: To obtain as good effects as possible it is important that the co- oporation is built on trust and engagement. Before implementing the EDI-system a thorough overhaul of the processes in the company should be done, involving both the top managers and the staff.

A lot of mine waste rock and tailings arise from all mining processes and have to be stored in an appropriate way. Tailings are deposited in impoundments retained by tailings dams. The objective of tailings dams is to retain the slurry from the mining process and in that way prevent spill into the surroundings that might be harmful for the environment. Tailings dams are often constructed as staged embankments so that construction costs and demand of materials are spread more evenly over the period of deposition.The objective of this thesis has been to compile information about and evaluate events at Swedish tailings dams and also to develop a collective database for all Swedish mining companies for all tailings dams and all events that occur at tailings dams.Information about 60 events at Swedish tailings dams has been gathered and evaluated. The evaluation has been performed by comparison between and analysis of individual parameters and also by use of a multivariate statistical method called PLS.

To provide our company a new business opportunity I have in this essay examined the economical possibilities to sell energy. I have chosen to do a case study on my own farm in this essay. The farm is focused to cropping and also have some properties for hire. The farm is situated in the village of Fjelie and that?s where the opportunity for selling heat are. Fjelie has about forty houses. The idea is to build a plant where straw is being used as fuel.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

The need for snow-free surfaces at squares, bus stops, platforms, car parks and sports facilities increases and at the same time energy price rise and the environment is becoming a hotter issue. The construction of the ground heating systems often lack thermal insulation under the heating pipes, which means that the heat from the pipes not only warm up the soil surface but also heats the surrounding soil. The insulation also has more features, by insulating the risk of frost damage is minimized. The goal of this report is to demonstrate the large heat loss and energy costs in the absence of insulation under the heating system.The report begins with a scientific way to study and treating the soil heating system uses, and the theory involved. Furthermore it also deals with different routing principles of heat pipes depending on the facility.All calculations are made with so called finite element method (FEM), in COMSOL Multiphysics 3,5a, where models are created with different conditions.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.