Today most ice rinks in Sweden use secondary refrigeration systems with a solution of calcium chloride and water as secondary refrigerant. Due to the large amount of energy such a system uses more efficient systems would be desired.An earlier study concluded in the possibilities of using carbon dioxide as secondary refrigerant with copper tubes as the loops in the ice rink. Since then 3 ice rink refrigeration systems has been built with carbon dioxide in copper tubes. Excluding the ones being direct involved in those projects there is still very little knowledge about how these system works. This study has been made primarily with the aim of adding to the knowledge concerning availability and cost and secondary to look at possibilities for improvement.A comparison between systems with carbon dioxide, calcium chloride respective ammonium solved in water has been made by using Decision Matrix.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

There is always a need for more effective ways to store energy in order to reduce the human impact on the environment. One step on the way can be the use of flywheels as kinetic energy storage devices. Low frictional losses are essential for a flywheel to be effective. To minimize these losses active magnetic bearings (AMB) can be used to keep the shaft centered instead of the more conventional ball-bearings. AMBs use actuators and a fast control system that needs correct and noise-free measurement data of the shaft position and the current in the actuators to work properly.This thesis explains the process of constructing power electronics and a current measurement system for active magnetic bearings (AMB).

The aim of this study was to investigate whether a dietary change, physical activity or a combination of both gave the best result when treating obesity, concerning weight loss and BMI. Excessive weight and obesity are today a big health-issue and it is estimated that 10 % of the men and 12 % of the women in Sweden have a BMI over 30, i.e. are suffering from obesity. The corresponding number for children is 3 %. No one can say for sure what causes obesity but there are many theories.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Byggandet av passivhus har ökat kraftigt under 2000-talet i Sverige. Dock har det inteutformats och byggts några studentbostäder i passivhus form ännu. Denna studie går ut påatt försöka utforma studentbostäder som uppfyller de svenska kraven för passivhus. Genomatt välja ut lämpligt material och komponenter, t ex. väggtyper, platta på mark ochfönstertyper redovisas olika beräkningar för energiförbrukning.I metoden till beräkningarna som genomfördes, där resultaten hamnar i jämförelse medvarandra, användes VIP-energy samt PHPP.

This thesis is made on behalf of SCA's Forestry Division and is a comparison of two bucking simulation tools: Aptan (manufactured by Skogforsk) and Best/upr (from Berget Systemdesign). The data is based on 32 stands from SCA's forests in Norrbotten and Västerbotten. The objective is to compare the simulations created by the tools with the harvested volumes from those stands. Three variables are needed for the bucking simulation; these are the diameter distribution (at breast height), the relationship function between diameter and height, and the taper coefficients. The volumes of five different assortments from the stands are compared.

I denna rapport undersöktes S&P 500 Energy Index genom multipel regressionsanalys. Modellerframställdes genom regression och baserades på data hämtad från börsen. Modellerna angavs iprocentuell ändring respektive absolut ändring. Validitet för varje enskild kovariat testades och en risknivå avgjorde om en kovariat skulle inkluderas i modellen eller inte. Detta ledde till två modeller med bättre kurvanpassning till den givna mängd data över det valda energiindex.

Intelligent IT-based solutions, often called Smart Grids, are considered to be the future balancers of renewable energy sources. One area within the Smart Grid concept is called demand response, which is focused on making customers more consumption flexible by making them more active in their consumption. In this thesis the aim is to analyze a business model by investigating the income potential for a demand response solution as well as its market potential. This has been done through literature studies, interviews and development of a computational model.The use of 5000 households with flexible consumption can provide a cost reduction of 17.2% or 2.4 million SEK for a balance responsible party during an average year. If the solution is used to make strategic bids on the regulation markets the study indicates that the largest potential for revenues lies within this strategy.

BIOGAS POTENTIAL IN GRASSES FROM WETLANDSMarvin MartinsThe purpose of this study has been to survey wetlands that are suitable for mowing and to analyze the biogas potential in the harvested grasses. A preformed investigation showed that there are suitable wetlands, which can be harvestable, namely those mowed formerly in traditional haymaking. The practice of traditional haymaking is dying out in Sweden today but there are several good reasons why it should to be reconsidered. Nature- and cultural values are obvious, also the unutilized energy in the grass.The suitable types of wetland that were specifically studied were the productive wetlands; meadow marshes and wet meadows. These wetlands are represented in the Swedish meadow- and pasture inventory database; (TUVA) and the Swedish national wetland inventory (VMI).

Mitt examensarbete innefattar en fönsterutredning för radhusområdet Skeppsvägen i Bålsta. Fastighetsägare är Håbohus AB och examensarbetet har skrivits för Skanska Sverige AB. Arbetet har skrivits på plats i Bålsta där Skanska Direkt AB har eget kontor och erhåller idag totalentreprenaden för renovering av Skeppsvägen. Arbetets syfte är att klart och tydligt redovisa eventuell effekt och energibesparing vid byte av befintliga fönster och altandörrar.Undersökning av fönster och altandörrar har gjorts okulärt, med värmekamera och med fuktkvotsmätare. Vid den okulära besiktningen noterades färgsläpp på fönster.

Today green tree retention, together with leaving dead wood, is a common practice with the aim to reduce negative impacts on biodiversity and environment due to clear-felling. To better understand whether this conservation practice also makes a long-term difference, it is important to know what happens to these trees after harvest. Few studies have made an assessment of what happens to retention trees over a longer time period. In this study I inventoried retention trees that were left at clear-cuts six, twelve and eighteen years ago. I carried out a re-inventory of 57 retention patches (divided into free-standing tree groups, small swamp forests and edge zones) and free standing dead trees, spread over 25 previous clear-cuts in central Sweden.

Syftet med en integrerad projekteringsprocess är att information tidigt skall tas fram och att projektörer skall kunna arbeta parallellt, exempelvis genom en gemensam BIM-modell. Revit och IDA Indoor climate an energy, även kallat IDA ICE, har i denna rapport visat sig vara två mycket effektiva verktyg som tillåter att information både kan tas fram, i form av energianalyser, men även kommuniceras digitalt med hjälp av så kallade IFC-exporter. Då projektörer får möjlighet att jobba i en gemensam modell kan de arbeta parallellt vilket innebär att information kan tillföras både tidigare och snabbare i projekteringsprocessen. I Revit kan arkitekten enkelt skapa olika utformningsförslag och jämföra dessa med avseende på energianvändning. Analyser från denna studie har visat att energisimuleringar i Revit kan användas för att utforska olika utformningsalternativ och därmed finna optimeringsmöjligheter med avseende på energi och inomhusmiljö.