Every year new premises are built in Sweden, and even if they are made as energy efficient as possible, this will not reduce the energy demands, but the rate of the increase of the energy use will be reduced. One type of facility in Sweden that is a major energy user is public baths, and this makes public baths an interesting facility to study more closely. There are around 500 public baths in Sweden and about 75 % of those can be seen as older baths with large need of renovation, and they all require a high level of energy efficiency measures. To show how the energy demand increase or decrease depending on the changes chosen to be made, the simulation application IDA Indoor Climate and Energy was used. Simulations were made and compared for several cases, with two extreme cases as starting points.

This report describes a bachelor thesis work performed at the cloud storage company CloudMe in Linköping, Sweden. The storage service provided by CloudMe allows users to access their files seamlessly from multiple units at the same time. In the cloud there is storage provided for contacts, calendar and e-mail, which is data nowadays normally used by smart phones.Exchange ActiveSync is a protocol developed by Microsoft which, among much more, provides functionality to synchronize the previously described data. This protocol is supported by the smart phone developers and the ability to synchronize over the exchange protocol is implemented in products by default. Due to this fact it would be preferable to implement support for synchronization from CloudMe to phones over this protocol.

The purpose of this project was to evaluate how energy efficiently some of JM?s residential buildings can become in standard production. What kind of measures are needed to achieve the level of energy demand that is included in BBR12 (Boverkets Byggregler)? What measures are needed for achieving a lower demand so that the buildings could be classified as passive houses? The investigation has included a single family house and two different types of apartment blocks.The simulation programs Enorm and VIP+ have been used to calculate the energy demand of the buildings. The results from the programs have been compared with the measured energy demand for the three buildings.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..

Den här rapporten presenterar examensarbetet utfört på Sekonden IT AB, vilket gick ut på att utveckla en lösning till Sekondens synkroniseringsproblem med kontakter i Exchange. Syftet med den här rapporten är att beskriva hur jag har gått tillväga för att lösa Sekondens synkroniseringsproblem, vilka hinder jag stött på och hur jag löste dem.För att utveckla en lösning till Sekondens synkroniseringsproblem behövdes en testmiljö sättas upp, liknande Sekondens servermiljö. En stor del av examensarbetet handlade om att få flera olika program att fungera tillsammans, vilket ledde till att jag spenderade mycket tid på installation och konfiguration. Jag har utvecklat en lösning som bestod av; en webbtjänst för att utföra synkroniseringsuppgifter, en Windowstjänst för att kontinuerligt anropa webbtjänsten och ett gränssnitt för synkroniseringsval, placerat i Sekondens intranät..

This report discusses a method to detect divers in harbour environments usingpassive acoustic detection. The goal was to achieve as high detection as possiblewithout having too high false alarm rate. A short execution time was also desirable.By using the characteristic of an inhalation a band-pass filter was applied to the signalto improve the signal to noise ratio. After the filtering an energy estimation of thesignal was made. This energy estimation was later used in a frequency analysis, whichcould tell us if there were enough energy in the frequencies that correspond to adivers breathing frequency.

Sweden?s energy consumption is divided into three major sectors. One of them is the industry sector. One third of Sweden?s energy consumption is converted in the industries.

Industries with energy costs as a large proportion of their total costs are greatly affected by the instruments deployed to cope with the Swedish climate and energy policy goals. With energy costs representing more than 30 % of the total costs, tomato cultivators are one of the affected industries. In order to remain competitive with other countries, a more resource- and cost-efficient cultivation of tomatoes in greenhouses is desirable in Sweden. Based on the concept of industrial symbiosis, this study investigates the prerequisites for a resource-efficient production of locally grown tomatoes in Sweden through the utilization of low grade industrial waste heat. The study is based on the foundry industry as the supplier of waste heat.To investigate the environmental, technical and economic potential of the exchange of waste heat, a comparative life cycle assessment, an inventory of the supply of industrial waste heat in Sweden, a compilation of potential technologies for the recovery of low grade industrial waste heat for heating greenhouses and a comparative life-cycle cost calculation were carried out.

In Sweden the real estate sector accounts for 33 % of energy consumption and just below 10 % of the emission of carbon dioxide. As a consequence of the external pressure from climate change it?s in everybody?s interest to reduce the energy consumption and thus reduce the emission of carbon dioxide. An additional incentive to reduce the energy consumption is the substantial increase of the energy price since the deregulation of the electricity market in 1996.In this study the techniques that exist to build multi-storey residential buildings with high energy performance will be investigated. Further the study intends to investigate the optimal energy performance from a real estate economic perspective.In order to investigate the optimal energy performance a model has been created with the parameters investment cost, rental revenues, operation and maintenance cost, discount rate and investment horizon.The result shows a relationship between a high investment cost and a high energy performance for newly constructed multi-storey residential buildings.

Energy efficiency is today more important than ever, mainly due to the high energy prices and the approaching climate changes. Heating of buildings is an essential area within energy efficiency. Many buildings are old and were built at a time when the energy prices were low and the term ?energy efficiency? was unheard of. By applying today?s broad range of energy saving actions on these old, and thereby often, heating ineffective buildings, this area has a large potential in reducing energy consumption and costs.Churches and chapels are generally old buildings with, in many cases, ineffective heating systems and therefore consume much more energy than needed.

Sigma energy app is a mobile application for subscribers to various energy subscriptions. The subscribers can use this mobile application to access information regarding their consumption, invoices and active subscriptions. The mobile application that was built consists of a GUI and a web API as middleman between the application and the database.                     .

In Sweden, a big part of the energy use is used in the housing sector. Political goals and targets are set up which the housing sector needs to work towards. Apartment buildings are a major part of the housing sector in Sweden and therefore reduction of energy use in these kinds of buildings are key to lower the energy use in Sweden. But there are not only political incentives to reduce the energy use. Some energy?saving measures are directly profitable and should thus be performed.

In the year 2002 the European Union decided on a new directive according to the energy use in buildings. The outcome of this direction is a proposition from the Swedish government on the outlines of a new law in the field of energy use in buildings. The date that the law will be applied is the first of October 2006. In the future al real estate owners must be able to show an energystatement over the real estate. This project contains cooperation with HFAB a local real estate company where two buildings are analyzed according to their energystatement.

Energy efficiency is important both to reduce costs and to reduce greenhouse gas in the atmosphere. In Sweden 40 percent of the energy consumption is related to the buildings sector. Hospitals are complex buildings with different activities in the same building, which requires flexible technical systems for ventilation, heating and lightning. A quarter of the total energy consumption in Swedish hospitals is related to user activities in the hospitals. Therefore it is not only important to work with operational optimization but also to change user activities, to reduce energy consumption.The objective of this thesis was to examine the user-related energy efficiency work at two care units, at the central hospital in Sundsvall within Västernorrlands County.

This report discusses a method to detect divers in harbour environments usingpassive acoustic detection. The goal was to achieve as high detection as possiblewithout having too high false alarm rate. A short execution time was also desirable.By using the characteristic of an inhalation a band-pass filter was applied to the signalto improve the signal to noise ratio. After the filtering an energy estimation of thesignal was made. This energy estimation was later used in a frequency analysis, whichcould tell us if there were enough energy in the frequencies that correspond to adivers breathing frequency.