Modern technology and fast development of heat pumps, the hunt for savings in energy consumption and the strive for environmentally friendly energy sources, convenience, and financial profit, have made heat pumps a reasonable alternative for the heating of houses.When the heat pump starts it will consume a considerable amount of current, which may result in a short-lived voltage-drop if the power grid is weak compared to the start-up current.The company Fortum Distribution which owns and administrates electrical network is interested in an investigation that deals with heat pumps affect on the quality of electricity.The purpose of this investigation is to study fast electrical fluctuations (flicker) as a result of start-up currents for single as well as multiple heat pumps on the same electrical station and from this evaluate whether there will be any problems installing heat pumps..

The Swedish energy system will be influenced by many future changes, such as energy and climate policy objectives. The installation of more renewable electricity could increase by using solar energy. Over the recent years, grid-connected photovoltaic (PV) systems have increased dramatically in Sweden, partly due to various support systems and compensation models. These support systems have been designed to make it easy for individuals and businesses to invest in self-generated electricity and thus contribute to the transformation of the energy system.The introduction of a higher proportion of solar energy may in turn affect the Swedish electricity system. This could mean that the electricity companies will be facing a number of changes in the near future.

Today all buildings contain some form of home automation. It might be heating controlled by athermostat or motion detectors controlling outdoor lighting.This paper,The Intelligent House, deals with the planning of a house in Kiruna, in the north ofSweden and further immerses itself in home automation or intelligent control in single-familyhomes. The house has been entirely planned, from layout to structural design and plumbing.The purpose of the paper has been to investigate the possibilities in home automation in singlefamilyhomes and to choose a suitable home automation system for the house being planned.The system has been designed and the costs and energy savings have been calculated.The system chosen for the house is called KNX and is the largest system for home automation inSweden. It is used to control heating, ventilation, lighting and alarm systems in the house. Is hasbeen found that KNX is very expensive and that the amount of energy, possible to save in thehouse, using the system, is relatively small.

Genom att studera olika kommunikationsprotokoll kunna svara på vad det är som gör att ett visst protokoll är bäst anpassat för att användas mellan mobila enheter och IoT-enheter.I arbetet användes en kvalitativ litteraturstudie för att ge en grundlig teoretisk bakgrund samt en experimentell studie där ett par teorier undersökts ifall de stämmer med resultaten ifrån verkligheten. De fem faktorerna kompatibilitet, batteritid, frekvens, räckvidd och tillförlitlighet undersöktes hos kommunikationsprotokollen Bluetooth Low Energy (BLE), Närfältskommunikation (NFC) och Wi-Fi. Dessa tre valdes eftersom de stöds av nyare mobila plattformar idag. Kommunikations-protokollen analyserades sedan gentemot olika användningsområden inom IoT, eftersom påståendet vad som är bäst anpassat beror på vad situationen kräver för egenskaper.En systemutvecklare som ska välja kommunikationsprotokoll till en IoT-tillämpning och läser denna rapport bör själv jämföra de olika protokollen mot varandra inom de fem faktorerna för att kunna avgöra vilket protokoll som passar bäst inom dennes situation. I arbetet utfördes endast experimentella studier på BLE på grund av begränsningar inom utrustningen.

This essay is a case study that deals with the integration of Scania into Sweden,which started for over 300 years ago. The purpose is to capture why theintegration of Scania succeeded, what were the main reasons or factors and todiscuss the effects the scanian identity and culture had on the integration. This hasbeen done with the help of different theories that will help sort out main factors tothe successful integration. The result of the study revealed a number of factors, tobegin with the scanian identity appeared not to be such a great obstacle for theintegration that one could believe. The identity developed because of the?swedification?, which were the measures the Swedish government took tointegrate the new territory.

PurposeThe purpose of this study is to investigate whether a combination of product placement and traditional advertising can enhance the company's marketing. We perform this study because we believe that the consumers consider traditional marketing in many cases obsolete.TheoryThe study?s theory consists of topics and terms of product placement, traditional marketing, branding and communications. Theories used in this study were the basis to answer the study's research question using empirical data gathered during the study.MethodThe study has a deductive approach with a qualitative focus, therefore, the study is based on existing research, which was later to use for the data extracted from the interviews. The approach is going to show differences and similarities between how it looks in reality versus theory.ConclusionThe results of this study show that product placement can increase the efficiency of traditional marketing.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

Cooling down the indoor air can be done in several ways. One way is desiccantcooling which will be used at the Stockholm Arena. This method is used in airhandling units that use temperature changes and moisture fluctuations in the air. Oneof the steps is to add heat during the cooling process in order to reduce the relativehumidity of the exhaust air. The air passes thru an adsorptions rotor which thenabsorbs moisture from the supply air.

In this thesis, the Train Power System Simulator (TPSS) has been compared and verified with the commercial simulator TracFeed® Simulation (TracFeed). The basis for the comparison was a given part of the Swedish railway system, with steel transportation trains. Primarily, emphasis was placed on running time and energy consumption in simulation results. Two transformer systems were analyzed, booster and auto transformers. The high voltage transmission line, parallel to the railroad track, was disconnected in some simulations.

Vi lever i en värld där teknikutvecklingen går allt snabbare och till synes exponentiellt och oförtröttligt kommer att fortsätta öka. Hur detta påverkar Försvarsmaktens val av tekniknivå för framtida sensorförmåga för artillerilokalisering kopplat mot operativa krav, interoperabilitet och ekonomi blir extra intressant när radartekniken befinner sig i ett generationsskifte. Beprövad teknik, internationella och militära krav på en artillerilokaliseringsradar ställs mot ny radarantennteknik, svensk forskning och utveckling av Aktiva Elektroniskt Styrda Antenner (AESA).Syftet med denna uppsats är att undersöka huruvida ny teknik är ett nödvändigt tekniksteg för artillerilokalisering eller är "gårdagens" teknik lika bra eller kanske till och med bättre i vissa användningsområden och situationer? Är AESA ett nödvändigt tekniksteg för artillerilokalisering?Metoden för uppsatsen är en jämförande litteraturstudie d.v.s. en kvalitativ textanalys utifrån en given teoriram.

AbstractDrinking water is an important resource on Earth both for humans and animals. Although most of the surface is covered by water only a small quantity is available as drinking water. Our manner of living creates a lot of pollution which has an environmental impact. Groundwater has a protracted turnover time in the soil and it can take many years before the effects of human impact are detected. The Swedish environmental object is ?Good groundwater quality? which aims to provide a safe and sustainable supply of drinking water today and in the future.

This essay includes the planning and designing of a house as well as writing a rapport about howto increase fire safety in small buildings.More than 6000 homes burn in Sweden every year (Brandskyddsföreningen, 2012c). Thedevastation and the costs are usually very high. This report examines possible measures to reduceboth personal injuries and economic losses resulting from house fires in small buildings.Swedishbuilding regulationsplay a major role when it comes to constructional fire safety. However therequirements inSwedish building regulations are very low for small buildings and this is anargument for raising the requirements.The report shows and describes possible methods to build safer with regards to fire in terms ofmaterials and different building structures. Major focus has been on fire cells but other solutionsare also examined and described.

Although women express a desire to be managers and although they constitute the majority of Sweden's newly graduated academics, they are still heavily underrepresented on senior management level in the Swedish private sector, where men hold as much as 95 % of the top positions. Considering the massive waste of resources that this implies, this thesis sets out to investigate the underlying reasons for the skewed gender distribution on senior management level in two Swedish professional services companies - an industry where the described problem has been palpable. Additionally, the thesis explores the effects of actively working for increased gender equality. With a basis in gender and organization theory, a broad theoretical framework has been compiled and applied to a qualitative case study design. The thesis reveals seven distinct impediments, which together create a parable of an obstacles course, that prevent women from advancing the corporate ladder in the same manner as their male colleagues.

This paper describes a method for wireless energy transfer via near-field electromagnetic inductionthat is inexpensive, simple and can be applied to almost any type of system, regardless of size andenergy demands.The method uses a primary unit consisting of an oscillator, amplifier and inductive coil thattransfers energy to a secondary unit consisting of a coil, rectifier and voltage regulator. Two typesof oscillators and several amplifier designs were realized and evaluated together with a multitudeof flat coils of both monofilar and bifilar type.The results show that it is important to use an oscillator whose frequency is dependent on theinductance of the connected transmission coil, such as the Colpitts oscillator. This is preferable toan oscillator with a preset frequency, such as a Schmitt-trigger oscillator..