An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

The aim of this thesis was to investigate how the use of the IT-personnelsystem influences human resources and the new challenges and future requirements that may occur, while IT-personnelsystem is used more extensively in the HR-function.Previous research referred to in this study, has focused on how the HR-transformation has contributed to the development of an IT-personnelsystem, which has been used with increasing frequency. This use has created a significant change in the HR-function. This thesis focuses on investigating, describing and analyzing how the practice and development of the IT-personnelsystem meets the needs of the HR-transformation.This study uses qualitative research methods to investigate sixteen users? experiences and our understanding and conclusion is based on both semi-structured interviews and webb surveys. Initially deductive, later on our study took a more abductive approach.The result indicated a variety of uses for a specific IT-personnelsystem dependent on the users? function and positions and also how HR-activity was organized within the business.

The aim of this thesis was to investigate how the use of the IT-personnelsystem influences human resources and the new challenges and future requirements that may occur, while IT-personnelsystem is used more extensively in the HR-function.Previous research referred to in this study, has focused on how the HR-transformation has contributed to the development of an IT-personnelsystem, which has been used with increasing frequency. This use has created a significant change in the HR-function. This thesis focuses on investigating, describing and analyzing how the practice and development of the IT-personnelsystem meets the needs of the HR-transformation.This study uses qualitative research methods to investigate sixteen users? experiences and our understanding and conclusion is based on both semi-structured interviews and webb surveys. Initially deductive, later on our study took a more abductive approach.The result indicated a variety of uses for a specific IT-personnelsystem dependent on the users? function and positions and also how HR-activity was organized within the business.

Objectives: The purpose of the study was to examine if a pre- and post-operative difference could be seen in self-reported pain disability and self-efficacy among patients undergoing surgery as treatment for spinal disc herniation in order to improve process of rehabilitation.Method: A quantitative and descriptive design was used. 10 patients awaiting surgical treatment for spinal disc herniation were included at Akademiska sjukhuset (The Academic Hospital) in Uppsala. Participation was voluntary and the selection was made by convenience. Data was collected using The Pain Disability Index and Self-Efficacy Scale by which the patient would estimate how hindered they felt because of their pain in everyday activities and their self-efficacy to perform everyday activities. This was done the day before surgery and two weeks after surgery.

The purpose of this paper is to examine information sharing in a hospital organization that is undergoing reorganization. The aiming is to make all employees at all levels actively involved in business development in order to create a smooth and, from a patient?s perspective, adequate emergency care. The paper suggests that the theory of social capital can explain the complexity of what motivate and what promote individuals to share information. The method used in the paper is the case study, focusing on detecting, interpreting and gaining insight on how information shares in an emergency department.

Through a thorough analysis of the current situation, we have highlighted differences inworking methods for the various workshops and drew up proposals for improvements incombination with a practical work description that can be implemented in the company..

The aim of the present study was to investigate the effect on growth of foals on two different diets, either a forage-based diet or a diet containing approx. 40 % concentrate. The report also includes a review of the pertinent literature on the effects of diet on mares? milk and growth of horses. The hypothesis of the study was that a forage based diet will result in a similar growth pattern as a diet including more concentrates if the diets contain the same amount of energy, crude protein, lysine, calcium and phosphorous.

Lower energy use in buildings is a result of increasingly stringent energy requirements across Europe. When conventional district heating technology is used in areas with low energy consumption heatlosses do not fall even though the amount of energy delivered is reduced. This reduces income for thedistrict heating company. To maintain their economic viability the district heating companies? majorchallenge is to implement new solutions that minimize heat loss.

In the world we live in today the environmental issues has become increasingly important, and we have begun to realize that we can not continue to use fossil fuels at the rate we do. When it comes to generating electricity we are constantly trying to come up with cleaner and more efficient solutions. The fuel celltechnology is one such alternative and has been around for over 100 years. Yet, it is not until now that the world has started to notice this great technology. The fuel cell has been developed in several areas and can today be used for handheld electronics, vehicles and small settlements.

This paper examines and analyzes effects of the introduction of a new management control system tool within a Swedish public health organization, the Södra Älvsborg hospital, and its possible effect on organizational change. The new management control system tool, known as the SÄS-model, has been widely criticized for being too costly and with too small positive effects to be shown. Our approach has with that as a background been to examine whether the implementation of the SÄS-model and its balanced scorecard has been able to result in effects regarding organizational change. We have through a case study aimed to analyze how a management control system, much alike one that is typically used within foremost private organizations, can promote organizational change. Our results suggest that the implementation of the SÄS-model and the balanced scorecard has given the organization clearer visions and goals.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

A passive house in Norra Djurgårdsstaden drawn by Tengbom Arkitekter is going to be built. A shaft for airing is needed for a few apartments in the house.The airing shaft is designed for a few two room apartments in the house, which are not able to achieve satisfactory airing, as their outer walls are facing a single direction. The other apartments on the same floor are corner apartments. These apartments do not have the same difficulty with airing since they have their outer walls in different directions, with different pressures at the facades. The airflow in the airing shaft is supposed to be driven only by natural forces, by the sun. The purpose of natural driven forces is to achieve low energy consumption for the house.In this thesis, a design of the shaft for airing has been developed.Initially an open shaft for all apartments was analyzed.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This thesis examines a possible control strategy to minimize flow fluctuations in Uppsala?s district heating system. High variations in flow rate may lead to complications caused by hydraulic constraints in the district heating system. These complications, such as inadequate pressure and temperature levels, increase the risk of heat delivery failures. It is therefore important to avoid such situations both for the producer and for the customers.Typically, the forward temperature is controlled by using a rough correlation with respect to the outdoor temperature.