A high quality is highly requested in today?s thinnings, since these are the base for continued value development of the forests. Thinning quality often means a minimization of damages on soil, stems and roots during the cutting. One way to reach a high quality is to set up goals that will be followed up after the cutting is made. Self-checking gives information of the machine drivers work and guarantees the customers a good quality of work.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

There are different ways of developing a second language. The purpose of this qualitative study is to investigate whether and possibly how music, focused on singing, can improve the development of Swedish as a second language. Through interviews with three vocal teachers, from three different schools in Sweden, and observations of one of the vocal teachers, information about how they work and think about the subject has been collected. The vocal teachers teach groups of second language learners by singing songs made especially for second language learning. The vocal teachers consider singing beneficial in the development of the pronunciation and improvement of the prosody, which affects the students? capacity to sound like a native Swedish speaker.

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Maize for silage has been used as fodder in different parts of the world for a long time and has recently become more common also in Sweden. Our cold climate has been a problem as maize is very sensitive to low temperatures and frost. With new varieties and better techniques for cultivation it is now possible to grow maize in the southern and middle parts of Sweden. As for the north of Sweden the length of the cultivation season is a limiting factor as there are too few days with temperatures of over +10 ºC. Maize is well suited for silage making but oxygen-free conditions are required.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

The purpose of this thesis is to investigate emotions and collective identity in the handicraftmovement. Which are the collective identities of craft movement, and is it possible to speak ofan over all collective identity among the handicraft people? I will also examine the emotion workboth on individual and group level.Eight qualitative interviews were conducted to achieve the aim of this thesis. Research haspreviously drawn attention to handicraft from a gender and a historical perspective but neverfrom an emotional one. The theoretical framework derives from an emotion sociologicalperspective where Collins interaction rituals, emotional energy and Hochschild?s emotionmanagement is the main theses.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

The contact company, LRF Konsult, is a consulting firm specialized in areas of law, real estate, finance and taxation. Discussions on the subject of agricultural improvement in the area of Lean, has primarily been driven by the Royal Swedish Academy of Agriculture and Forestry, where LRF Konsult also participated. This thesis can be seen as a preliminary study of how Lean can work within agricultural enterprises.The thesis primarily focuses on the possibilities dairy farms have to improve operations. What practical benefits they can obtain through the implementation of Lean. And how an implementation could take place.By visits to two dairy companies, and through interviewing their respective business leaders, an image of the companies activity for improvement, in connection to this thesis was established.

The energy sector of modern time is currently faced with several challenges. These are both production oriented and environmental oriented in nature. The energy of the future is intended to support an increasing demand while at the same time reduce its environmental affection. This stresses a development towards production methods of renewable energy. Among the existing methods, biogas is presented as an attractive alternative.

The aim of this study about wind power planning in forest was to examine the factors and restrictions, which represent technical limitations, biodiversity, tourism and amount of energy for wind farms in Kronoberg County. Suitable areas for wind power were identified from the collected information about planning principles and potential conflicts. From the suitable areas the potential energy gain is calculated. Methods used were mainly a literature review, interviews with experts and practitioners, GIS analysis and a rough calculation of the energy gain. The section of information and facts describes in general wind power planning and possible conflicts.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.