The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

Energy losses are an essential part of a power grid company?s costs. From anenvironmental and economic perspective, it is important to reduce these costs. Toknow where efforts should be deployed, it is important to have good knowledge ofwhere in the network losses are situated. When creating network tariffs, there is alsonecessary to have a correct distribution such that the network customers that use acertain part of the network, only pays for the network losses in this area.

The world?s growing need for energy together with a desire to ward off the worst consequences of global climate change has resulted in a never seen desire to invest resources in renewable energy sources. Biogas production through anaerobic digestion is one of those growing energy sources. In Sweden there are over two hundred plants that uses this biological process to break down organic substances while producing carbon dioxide and the energy-rich gas methane.This master?s thesis has focused on development of the mixture of different organic substances that is treated at a specific plant, namely Mosserud biogas plant.

Osteoporos eller benskörhet, är en folksjukdom som vanligen inträffar i samband med åldrandet. För att kunna diagnostisera, upptäcka och följa frakturrisk i god tid är det bra om en bentäthetsmätning görs. Bentäthetsmätning eller bendensitometri utnyttjar metoden Dual energy x-ray absorptiometry (DXA). För att kunna bedöma metodens reproducerbarhet rekommenderas att periodvis genomföra en kvalitetssäkring vid bentäthetsmätning, eftersom det är en kvantitativ mätning. Syftet med studien var att kvalitetssäkra metoden för bentäthetsmätning.

The first commercially produced wind turbines in Sweden are starting to reach theend of their lifetime after approximately 25 years of producing energy. The cost fordismantling the turbines, according to Ardefors et al. (2009), is calculated to be 1-2 %of the total investment of the wind turbines. The purpose of this master thesis is tomap the dismantling process of wind turbines in Sweden and try to find a sustainablesolution for the future.To make sure that a correct dismantling process takes place, and that the financialaspect is covered, a proposal for a financial guarantee is worked upon. A nationalunanimity will be created through a financial guarantee and the risk will be minimalof a third party getting afflicted.Studies of literature and interviews have been carried out.

AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andmanufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.

The student project Elba at KTH started in 2011 and is a project where a battery driven prototype car is developed. The vehicle competes in Eco Shell Marathon in Rotterdam, Holland. In this competition the vehicle that travels a certain distance including several starts and stops with the lowest energy consumption wins. To minimize the consumption is therefore very important, which requires knowledge of the vehicles energy losses.A vehicle's energy losses depends on several factors and can be divided into the powertrain efficiency and the driving resistance. The driving resistance can then be divided in to rolling and air resistance, if smaller losses like vibrations are ignored.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

The goal with the project was to make the graphic for Djungeltrumman.se´s upcomingwebb-TV. Djungeltrumman.se is a clubguide on the internet and as a magazine.Their target group is people in the age between 18-34 with an interest for culture and nightlife that lives in a city where Djungeltrumman.se is active. The purpose of the project was to make a graphical frame that had the feelling ofDjungeltrumman.se. The feeling should capture the interest of the target group and make them care more for Djungeltrumman.se.The graphics will contain an intro, information frames and presentations for the different parts in the program. In this project I focused on making the intro for the program.

This thesis investigate how energy efficient measures has spread throughout the data centers in Sweden. These questions are put up against a theoretical use of such concepts such as green IT, technological evolution, large technical systems and knowledge dissemination. These theories are used to answer the questions that are encountered during the study, such as how green IT is approached, how big of a role environmental thinking has had in the evolvement of these new technologies. The study has been conducted in a longitudinal manner, it is an observation of the phenomenon that is data centers over a longer period of time. 23 non structured interviews spanning over 27.5 hours of recorded material have been conducted alongside a study of archived material.

The town of Karlstad has a long term project called Vision 100 000 which aim is to increase the population towards 100 000 inhabitants. This will of course put a strain for the town?s energy distribution grid. This is a work about trying to predict the grids power usage would be for the next five years if the city building plan is finalized. Those predictions are mainly going to be done through calculations with a database program called Facilplus and by checking the measured history of power usage per hour on certain selected customers by the program CustCom.

Migration and giving birth are crucial decisions for animals during their life cycle, which may have lasting consequences on their population demography and fitness. Migration can entail a variety of possible effects for an individual, such as access to high quality food and reduced risk for predation. The moose (Alces alces) in northern Sweden is partially migratory and moose females are known to give birth to one or two calves. The synchrony between time of calving and timing of migration has not been compared before, especially in terms of energy maximizing and time minimizing perspectives, which may provide vital cues for fitness benefits of migration. I investigated effect of timing of birth and individual life history on distance, timing, stopovers and duration of 190 individually marked female moose that have been tracked for multiple years in ten different areas in northern Sweden.

Vi lever i en värld av klimatförändringar där det ständigt söks efter lösningar för att minska utsläppen av växthusgaser. IMO har infört SEEMP:en med målet att reducera utsläppen från världshandelsflottan och därmed öka dess energieffektivitet. Med denna bakgrund har syftet varit att undersöka hur svenska tankrederier implementerat och tillämpat SEEMP:en samt kartlägga åsikter kring den. En kvalitativ metod har använts för att på djupet undersöka rederiernas tillvägagångssätt. Undersökningen omfattar fyra semistrukturerade intervjuer med totalt sex personer ifrån två rederier där både ombord- och landanställda finns representerade.

Because of the increasing trends in energy consumption and increased environmental awareness, greater focus has been placed on improvement and development of renewable energy sources. An already proven and accepted method is biogas production from anaerobic digestion at municipal wastewater treatment plants.In the waste water treatment process solid material and dissolved pollutants are separated from the water, forming a sludge. The sludge is separated from the process and stabilized during anaerobic digestion or aerobic aeration. Most often, mesophilic anaerobic digestion is used. Because of degradation by microorganisms, biogas with a high content of methane is formed during the digestion.