District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The climate change the earth today has to face is no longer a global problem when every individual has a responsibility to act. The residents in Sweden have no understanding how their energy consumption affects the environment, nor what measures can be taken to reduce the energy consumption.The use of the energy in new Buildings is considerably lower than in the older ones as conditions have improved and the requirements have been more stringent. As most of the buildings in the future have already been constructed it´s important to take every opportunity for energy efficiency and rebuilding of available buildings will become a significant act. Reconstruction of a building contributes generally to both a reduced individual and a reduced total energy use, while new constructions only keep a low individual energy use but a increase the total energy use. For this reason we present the opportunities for reconstruction, mainly to reach the standards for a passive house..

The aim of this study is to examine the understanding, preschool teachers, have about their work related to energy conversion in the human body. Through individual interviews, answers have been sought to the following questions: What do the preschool teachers believe they need to know about the link between food and energy? What are the different methods preschool teachers use to workwith the area of energy conversion in the human body?The results show that preschool teachers have knowledge in terms of food and its nutrients as an energy source for the body to cope with. However the more thorough and detailed questions become all the more uncertainty there is about the topic. Preschool teachers on their own initiative do bring up the topic with the children and begin conversations as well as ask questions, perform experiments and demonstrations.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

This study has been carried out in the spring of 2014 on behalf of PQR Consult AB in Stockholm. The aim of the study has been to analyse the energy usage of the building Skarpövägen 1 in order to explore the possibilites of saving energy by using appropriate equipment. These possible solutions have been simulated by using the programe IDA Indoor Climate and Energy, combined with a life cycle cost analysis. The laundry building, Skarövägen 23, has also been analysed due to its high amount of energy usage. The result of the energy analysis showed that the energy usage was much higher than the energy declaration.

This thesis investigates how energy is used in three public baths today and suggests measures that could reduce the energy demand. The results show that there is a great poteltial for energy savings i public baths, and that it would be interesting to examine some of the proposed measures further..

The interest in building low energy houses has increased along with the rising engagement inthe climate questions. With the advancing energy prices it is highly suitably for those whobuild and administer their buildings in long-term to build energy-saving houses. 40 % ofSweden?s total energy consumption constitutes of the energy in residences, therefore it iscrucial to take advantage of all the free energy as we possibly can. With crucial questions likequality of living and profit low energy building is a subject that concerns us all.Three proposals for apartment blocks are presented in this work on a real estate in Stockholm.Each proposal is developed through unique processes of design with the purpose to displaypossibilities to deal with the energy requirements of today and tomorrow through energybased architecture.The first proposal is an apartment block based on a traditional design process, the demands ofthe property owner and it?s affected by opinions from architects.

Sweden has an environmental goal to achieve until the year 2020. To achieve this goal the construction business has to take an initiative to use the modern techniques that are available to lower the energy consumption I buildings. There?s also a debate going on today regarding the energy demands set by the Swedish government through Boverket, some communities throughout Sweden thinks that the demands are to low and have therefore set up own demands regarding energy in buildings.The possibility to construct energy-saving buildings is today very great, with energy-efficient heating-systems and dense climate envelope. The interest to raise energy-efficient buildings have also increased as a consequence that the population have become more aware about their impact on the environment.

The rising demand for electricity and heat raises a big challange for the society and engineers. Many products have been introduced to the market to supply more energy to the energy systems. Absolicon AB is a Swedish company that develops and markets a combined heat and power generating product. The product, Absolicon X10, uses a parabolic trough to concentrate the radiation of the sun onto a receiver. The receiveris equipped with mono crystalline solar cells and is cooled by a circulating liquid media.

Tången 2 is a building situated in Stockholm, Sweden. It´s built in the 1930s and contains both residences and businesses. The property owner, Diligentia AB, wants to lower the energy use in Tången 2. This report consists of an energy audit which clarifies the specific circumstances linked to Tången 2. Collected knowledge is then used, together with the results from the literature study, to decide energy measures to proceed with.

The amount of electricity is limited in Namibia and the large distance between towns andvillages complicates the energy supply in the country. Therefore an alternative way to provideaccess to appropriate energy technologies is needed. The Government of the Republic ofNamibia (GRN) has adopted an approach of helping off-grid households by establishing EnergyShops in each region in Namibia and these shops are going to sell basic renewable energy andenergy efficient products. The Renewable Energy Efficiency Institute in Namibia (REEEI), theinitiator of this thesis, is coordinating the establishment of these Energy Shops.The main purpose of this thesis was to examine the needs of energy products for the Namibianpopulation and develop an assessment method for the Energy Shop in how to select appropriateenergy products already on the world market. The purpose was also to develop a method forchoosing an Energy Shop.

Energy efficiency has become a very topical issue that has been discussed throughout the European Union for preventing negative environmental impacts that have been associated with the consumption of energy. In the residential sector have mainly municipalities set strict requirements for the reduction of energy consumption while the renewable energy has been asked. Different concepts of low-energy buildings have been developed to reduce the cost of operation and maintenance in existing buildings such as in new ones.This thesis has aimed to minimize the energy cost of a large building which has had low energy consumption features originally. Energy reviews has been initiated in order to be able for showing how the house electricity could be carried out even more efficiently.The work was initiated through a literature study to clearly increase the reliability on the energy subject. Different concepts of low-energy buildings have been treated in connection with its specifications, afterward those have been compared with the obtained results.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.

The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.

This degree project aims to investigate the potential and possibilities for conceptual energyanalyses in the early stages of the design process. Many key decisions are made in theearly stages of a project regarding the shape and orientation of the building. Conceptualenergy analyses can provide the architects with insight regarding different design option?srelative energy performance.As the demands for more sustainable buildings increases, so does the need for earlyenergy analyses. Performing analyses in the early stage requires many assumptions andguesswork which could lead to a large margin of error.The offering from Autodesk is a module in Revit Architecture/MEP and the stand aloneprogram Project Vasari (under development).