Version:1.0 StartHTML:0000000178 EndHTML:0000005278 StartFragment:0000002640 EndFragment:0000005242 SourceURL:file://localhost/Volumes/NAMNLOS/Examensarbete%20kortisol.docFöreliggande studie syftar till att försöka utläsa skillnader mellan två olika perioder då den personliga stressfaktorn upplevs vara olika intensiv. Undersökningen syftar även till att studera huruvida den mänskliga kortisolutsöndringens diurnala upp - och ned gångar följer en intraindividuell stabilitet av CAR (cortisol awakening responce). Detta skulle innebära ett upprepande mönster av kortisolkoncentrationens magnitud och mätvärde inom varje individ från dag till dag, vid uppvaknandet och 30 minuter efter.Undersökningen har genomförts som en pilotstudie där en försökspersons kortisolkoncentration i saliv har mätts genom enzymkopplad immunabsorberande analys (ELISA). För att jämföra mätserierna inom de olika perioderna med varandra har även en variationsanalys av typen Analysis of variance (ANOVA) utförts med hjälp av programvaran SPSS. Då provernas mätvärde har analyserats och jämförts med varandra har ett resultat kunnat fastställas.Eftersom utsöndringen av den individuella kortisolkoncentrationen lätt påverkas av omgivningsfaktorer användes endast en försöksperson, författaren, vilket underlättade en detaljerad analys där observation av påverkande faktorer lätt kunde tas med i beräkningen för att fastställa ett tillförlitligt resultat.

Fusarium head blight is a large problem world wide which reduces the yields and the quality of small grains. Shrunken kernels with decreased thousand kernel weight as an effect and pro-duction of mycotoxins are some of the problems caused by infection of Fusarium spp. To avoid toxin contaminated bulks to enter the food and feed chain it is important to have tools for prediction and analysis of the fungi and toxins. Good prediction methods are also impor-tant in the breeding industry since early identification in trials of lines with high resistance or susceptibility simplify the work. To compare different techniques for these objectives this project was initiated.

Earlier attempts at mechanising pre-commercial thinning have been met with varying degrees of success. Most attempts have been based on techniques where residual stems are straddled. Early treatment is essential to limit damage on residual trees. One part of the present study is an evaluation of mechanised pre-commercial thinning using the new Vimek 404R. Vimek 404R is a fairly small machine that permits selective removal of stems, making it potentially suitable also for areas overdue for pre-commercial thinning. The study established the level of performance for the machine, as well as the improvement needed to make it an economically viable option.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

Degree project in Logistics, 30 credits, The Business Administration and Economics Programme, Linnaeus University, 4FE05E, Spring 2013Authors: Ida Nilsson & Malin Skacke Tutor: Peter Berling Examiner: Helena ForslundTitle: Increased profit potential by controlling customers? ordering patterns -­? A case study at OatlyBackground:Oatly manufactures and sells oat-­?based products and deliveries are today carried out through an external distributor. The company is going through a re-­?organisation and will in the future be managing stock keeping and planning of deliveries with their own resources. The customers? present ordering frequency and volume differ substantially, leading to unnecessary costs.

Large volumes of excavated soil and rock are generated in building- and construction projects. These materials need to be transported longer and longer distances due to the densifications of cities. The transportation affects the environment in terms of noise and emissions, but also makes high demands on road infrastructure. To reduce the transport distances an increased responsibility for the excavated rock generated needs to be taken. Responsibility can be increased through an introduction of means of control.

The report addresses four main tasks, situation analysis of the company's total costs and transportation volume, cost analysis associated with the adjustment of the filling ratio, transport costs for the expansion and new expenses on a combination of expansion with new adjusted filling ratio.  Increasing transport costs for the company was the main reason for the request of the current situation analysis. A survey of the total cost with the actual volumes and transport provider pricing is the basis of the analysis that extends from May 2006 to October 2008. The results show an increase in costs, both overall expense and per cubic meter of transported goods. Volume spreads, trends, and seasonal variations are according to our and the company?s expectations.

Poly- and perfluoroalkyl substances (PFASs) are a group of environmental contaminants that have gained increasing attention due to their potential to bioaccumulate, environmental persistence and potential toxicity. PFASs have been found in surface water, sediment, air, soil, sludge and ice caps globally, as well as in wildlife and humans. Furthermore, PFASs have also been detected in drinking water, leading to raised concerns for human health, since drinking water is one of the most significant sources of PFASs for the general population. Conventional water treatment techniques have shown to be ineffective removing PFASs, highlighting the importance for further research to develop efficient removal techniques. The aim of this study was to investigate the removal efficiency of PFASs in water using two treatment techniques; granular activated carbon (GAC), type Filtrasorb 400®, and anion exchange (AE), type Purolite A-600. Additionally, the effect of dissolved organic carbon (DOC) on removal efficiency was studied.

Today green tree retention, together with leaving dead wood, is a common practice with the aim to reduce negative impacts on biodiversity and environment due to clear-felling. To better understand whether this conservation practice also makes a long-term difference, it is important to know what happens to these trees after harvest. Few studies have made an assessment of what happens to retention trees over a longer time period. In this study I inventoried retention trees that were left at clear-cuts six, twelve and eighteen years ago. I carried out a re-inventory of 57 retention patches (divided into free-standing tree groups, small swamp forests and edge zones) and free standing dead trees, spread over 25 previous clear-cuts in central Sweden.

In this work I have tried to reconstruct the forest history within Särna-Idre forest common in northern Dalarna from the 19th century until present time. The Särna-Idre region has been an extensively used landscape for a long time. Pollen which indicates grazing has been found in samples orginating from the 10th century. Early travellers from the 18th and 19th centuries seem to have been passing trough a "used" landscape. Burned forests on naked ground are described as common. Also large areas are mentioned as undisturbed with lots of large trees, snags and dead wood.

Since the financial crisis of 2007, the global financial market has been characterized by instability. At the same time the banks? lending rates and its link to the reporänta have been in the spotlight in various debates in the media. The government with Anders Borg leading the charge has criticized the banks for not lowering their lending rates when the reporänta has been lowered. The banks defend themselves by saying that the reporänta does not have a direct link to their lending rates anymore.

This final thesis is performed on commission of Hargs Bruk Ltd. Hargs Bruk manages one of Sweden?s largest privately owned forests. A main part of the managed forest is situated in Roslagen in eastern Uppland. Since 1934 felling calculations have been performed within the estate every tenth year.

Arkitektkontoret Sweco Architects i Göteborg har tagit fram ett förslag för ett bostadsområde i Varberg, där Varbergs kommun var beställare. De föreslog att ett eget områdesförslag skulle tas fram i Revit Architecture utifrån de planbestämmelser som gäller i området. Som en fördjupning i detta arbete valdes att även studera arbetsprocessen i programmet samt hur denna process kan tidsoptimeras. Ett problem idag är att en sådan process kan vara tidskrävande och ineffektiv. Syftet med detta arbete var att finna idéer på hur processen kan effektiviseras och att utveckla kunskaperna om Revit.Som en inledning modellerades hur området ser ut idag i Revit utifrån en ritning skapad i AutoCAD.

Arkitektkontoret Sweco Architects i Göteborg har tagit fram ett förslag för ett bostadsområde i Varberg, där Varbergs kommun var beställare. De föreslog att ett eget områdesförslag skulle tas fram i Revit Architecture utifrån de planbestämmelser som gäller i området. Som en fördjupning i detta arbete valdes att även studera arbetsprocessen i programmet samt hur denna process kan tidsoptimeras. Ett problem idag är att en sådan process kan vara tidskrävande och ineffektiv. Syftet med detta arbete var att finna idéer på hur processen kan effektiviseras och att utveckla kunskaperna om Revit.Som en inledning modellerades hur området ser ut idag i Revit utifrån en ritning skapad i AutoCAD.

Arkitektkontoret Sweco Architects i Göteborg har tagit fram ett förslag för ett bostadsområde i Varberg, där Varbergs kommun var beställare. De föreslog att ett eget områdesförslag skulle tas fram i Revit Architecture utifrån de planbestämmelser som gäller i området. Som en fördjupning i detta arbete valdes att även studera arbetsprocessen i programmet samt hur denna process kan tidsoptimeras. Ett problem idag är att en sådan process kan vara tidskrävande och ineffektiv. Syftet med detta arbete var att finna idéer på hur processen kan effektiviseras och att utveckla kunskaperna om Revit.Som en inledning modellerades hur området ser ut idag i Revit utifrån en ritning skapad i AutoCAD.