The avowed aim in this project was to see how the Swedish egg production is today. My first question was if the Swedish egg producers egg production turn a profit. I have done five after calculation at five different egg producers with different systems from case to case. The difference has been the living system, the fodder and the egg price. They made a report in Uppsala, Sweden (Hoffman & Andersson, 1996), where the look forward to a Swedish cage ban and made calculations after that coming ban. After that they lift the Swedish ban of cages and the egg producers could invest in new cages who called the decorated cage.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

The aim of this study was to investigate the production of knowledge that can emerge in the use of Practice Research by Mirror method. This by finding out what it is in the practical work that leads to the production of knowledge and how knowledge production takes form. The empirical data that form the basis for this study is recorded group within the Mirror method discussions and a focus group interview with social workers who participated in the discussions. Those who have participated are social workers with experience from working with financial aid support and only real cases have been used in the discussions. The results have been analyzed according to Lipsky's theory of street-level bureaucracy and their discretion and Fook and Gardner´s theory of critical reflection.

Background and problem discussionThe temporary employment industry has grown extensively during the past two decades since the market was deregulated. Companies today need to be flexible to meet fluctuating demand and economic climate in society which has made the market expand. When using employees not directly employed by the company there is a risk that long term effects appears that the companies have not thought of.Aim of studyTo create a model of what negative aspects companies should consider when making the decision to use temporary employees.Methodological frameworkThe study performed through an abdicative literature study and with an empirical data collection method of a qualitative approach where we interviewed five hiring companies and one temporary agency on the decision of hiring temporary employees.Frame of referenceProblem areas with the use of temporary employments were identified through four perspectives of the organization; the structural, human resource, symbolic and political perspective. The problem areas we address are organizational learning, motivation, risk of eroding human capital, belongingness and conflicts. These will be described and presented together with management control to counter the problems.EmpiricsThe empirics are focused on what aspects the companies of the study considered when making the decision to use temporary employment, what the companies? different reasons for using temporary employment are and what they do to minimize possible negative effects.Analysis and conclusionsCompanies use temporary employees mostly to become more flexible, both numerically and in their competence.

Purpose: Exploring the relatively new technology of convolution reverb, to gather knowledge on its limitations when used practically in the production of pop music, and from these findings to learn about applications in other performing arts and sound design. Methodology: This is a case study of creating convolution reverb by doing impulse responses (IR) and then applying them to studio recorded pop music. The empirical data consists of the final song results, notes and journals from during the process and the comparisons, as well as established litterature on acoustics, psycho-acoustics and music production. Results: Convolution reverb can widely and freely be used in the production of music and other audio-based art forms, since our study shows that the result of a well-made impulse response from a particular room is indistinguishable from music that is actually played and recorded in the same space..

Social policy has now received an increased attention in the European Union. The European welfare states experience a high level of unemployment, which the EU now tries to handle through the European Employment Strategy (EES). The core of this essay is whether the welfare institutions of the European member states are integrating through an institutionalization process or not. Within the EU four different types of welfare models can be identified: the Scandinavian, the Continental, the Southern and the Anglo-Saxon. The welfare models differ in the institutional settings e.g.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Syftet med detta arbete är att undersöka projektet SIN (arbetsplatsintroduktion för vissa invandrare) och analysera problemen kring arbetsmarknadsetablering för vissa invandrargrupper. Metoden har använts i Sverige sedan år 2001. Metoden har sitt ursprung i USA och Canada och heter där ?supported employment?. Den svenska varianten benämns arbetsplatsintroduktion.

Syftet med detta arbete är att undersöka projektet SIN (arbetsplatsintroduktion för vissa invandrare) och analysera problemen kring arbetsmarknadsetablering för vissa invandrargrupper. Metoden har använts i Sverige sedan år 2001. Metoden har sitt ursprung i USA och Canada och heter där "supported employment". Den svenska varianten benämns arbetsplatsintroduktion. Målgruppen för projektet är invandrare från utomnordiska länder som har sämre förankring på den svenska arbetsmarknaden. Undersökningsgruppen består av åtta personer, fyra deltagare och fyra handläggare och den metod som jag använt mig av är kvalitativ. De viktigaste resultaten som jag har kommit fram till är, att deltagarna är väldigt nöjda med sina handläggare och känner att det finns någon som stödjer dem vid behov. Förmedlarna är eniga om att den sökandes namn är det som ställer till när man söker arbete och att det även finns de med språk- och skrivsvårigheter, som inte kan komma vidare och behöver extra hjälp. Enligt både förmedlare och deltagare betyder stödet de får i projekt oerhört mycket för dem och det kan öka deras chans och möjlighet att få kontakter och bättre förankring på den svenska arbetsmarknaden..

The purpose of this thesis is to study what motivational factors motivates the staff in the public elderly care and to investigate how the staff ranks the different motivational factors and if the rankings differ depending on gender, age, education, type of employment, time of employment, employer, income and ethnic background. The thesis is based on a questionnaire study with a total of 97 participants. The questionnaire was constructed with the help of prior similar studies conducted in the USA and Malaysia over a sixty-year time period. These studies are then used to analyze the results. The participants in our thesis were given ten motivational factors to rank according to what they believed motivated them the most.

Background: Mass customization has been identified as a competitive business strategy by both companies and academics because of its ability to incorporate the voice of the customer into companies? products and services. Although mass customization may sound appealing, the strategic concept is still developing and firms adopting this business strategy face several challenges. Production concerns are of high relevance since mass customization implies a high level of customer involvement in the product design. Since the areas are closely linked it is reasonable to ask how a mass customization strategy affects production concerns.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

Today's labor market is characterized by flexibility. This applies to organizations, forms of employment and working time. Unregulated working time is such an adaptation and the main subject of this essay. The purpose of this study was to investigate the conditions that underpin unregulated working time, in relation to the Swedish legislation and to EU legislation. The intention has been to investigate the work environment impacts of unregulated working time, and what differences there are from a gender perspective.The conclusion is that workers who enter into agreements for unregulated working time have significantly different terms from traditional workers.

This report is about the issue with decreasing production rate mainly caused by failuresrelated to the multiswitch. The multiswitch is a machine at Gefleortens Mejeriföreningwhich has the function of distributing milk cartons from one incoming track into fiveoutgoing tracks. Milk cartons who gets stuck and there by causes the production to stop,is the mainly problem with this constructionThe purpose with this report is to understand the causing factors and make suggestions which can help solving these factors. By analyzing the machine during production, having contact with different suppliers, searching internet for information, 3d-cad drawings and the complementary with personal experiences, this machine has  been evaluated and as a result of this new problem has come to be known.The discovered problems was analyzed and resulted in new suggestions for alternative options. Later the most functional results was chosen and put as a suggestion for the new model.A new machine built with the suggestions from this report assures to be well adapted to the environment at Gefleortens Mejeriföreing and the problems it causes..

Arbetet syftar till att undersöka möjligheten att med hjälp av moderna arbetssätt få en arbetsgång med ständiga förbättringar inom anläggningsbranschen. Sökandet sker med hjälp av litteraturstudier kring ISO 9000 och LEAN samt studiebesök vid två företag, Hauler&Loaders Arvikafabriken (Volvo Wheel Loaders AB) samt PartnerTech Karlskoga AB. Detta är företag som under tid arbetat med dessa frågor och som nått goda resultat.Det framkommer att ISO 9000 är mycket öppet och inte detaljstyrande men att det finns vinster att hämta genom nyttjande av standarden. Kunder får en bekräftelse på att företaget i fråga har uppnått en god lägstanivå och det certifierande tredjepartsföretaget kan under externa revisioner hjälpa till att förbättra kvalitetssystemet. LEAN däremot är mer handfast även om det precis som ISO 9000 innehåller en stor del vision och filosofi.Studiebesöken har mynnat ut i ett flertal handfasta arbetsmetoder redo att anpassas för tester inom anläggningsbranschen.