To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Storm water causes a number of problems in our country, particularly in city environment with its surfaces of non-absorbing ground materials. At heavy rain falls there are floods due to lack of capacity in the drain system when meeting heavy water masses over a short time. When the drain system is overloaded huge water masses reach the recipient untreated and there causing disturbances in the aquatic ecosystem. Due to emissions from mainly traffic, industries and other human activities the storm water is polluted. Earlier the problem used to be solved technically, by increasing the capacity of the tubes and by construction of reservoirs to delay the floods peaks.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

This thesis examines the ongoing European political debate on the links between livestock production and climate change. In the end of 2006 the UN Food and Agriculture Organization (FAO) released their report Livestock?s long shadow, showing that livestock production represents some 18 % of the total global greenhouse gas emissions. The purpose of this paper is to explore the European Commission?s position and response to this question since the release of the report.Using Arne Naess? argumentation analysis, statements made by the Commission will be systematically organized and broken apart.

Denna studie avser att ta reda på om någon förändrad effekt kan fås gällande bränsleförbrukning och emissioner då dieselolja strömmar igenom ett magnetiskt fält innan det förbränns i en dieselmotor som driver en generator. Utrustningen som ger upphov till magnetfältet har tillhandahållits av ett kommersiellt företag. Studien består av två delar, en teoretisk del och en praktisk del. I den teoretiska delen presenteras tidigare vetenskapliga studier inom ämnet samt hur tillverkaren av utrustningen menar att tekniken fungerar. I den praktiska delen har tester gällande rökgasemissioner och bränsleförbrukning gjorts.

This study includes several purposes which are to describe the concept of working environment, explain who is responsible for its functioning and how the working environment should look like. Other purposes the study have is to investigate how the working environment is in both Swedish and the two investigated companies construction sites and to share some operators proposing measures for the shortcomings and problems that exist in the construction sector working environment. To achieve these purposes was a qualitative study made with unstructured observations, interviews and survey where three construction sites were observed. The result shows that the concept of the working environment cover many aspects and is essentially about the environment we live in and experience in our work and this environment can be both an indoor as an outdoor environment. In this work, the concept is divided into four areas; it is the physical, the ergonomic, the psychosocial and the chemical.

The society of today can?t manage without transportation. We need transports to getfood, to go to work and to create new products. The transportation ofgood is thus an important part in the function of the society and they?ll increase, bothin number and in amount.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Swedish biogas is currently produced mainly by anaerobic digestion of sewage sludgeat sewage treatment plants, landfills and anaerobic digestion of household or industrialwaste. Also cattle ma-nure from farms can be used to produce biogas. Upgradingbiogas represents an increase in methane concentration from about 65 % to about 97%. In addition, particles and contaminants must be sepa-rated from the upgradedbiogas. There are various methods for upgrading and this report compares sixdifferent methods with respect to environment and economy: water scrubber,Biosling, cryo technology, chemical absorption, Pressure Swing Adsorption (PSA) andmembrane separation.According to the used ORWARE model, chemical adsorption with amine has the leastenvironmen-tal impact (methane emissions) and the lowest costs.

Fo?rbra?nning av traditionellt fartygsbra?nsle medfo?r utsla?pp av a?mnen som har negativa effekter pa? miljo?n. Uppkomsten av stra?ngare internationella regler ga?llande utsla?pp fra?n sjo?fartstrafiken kra?ver ett skifte fra?n det konventionella marina bra?nslet tjockolja till alternativ med la?gre utsla?pp. Va?gkraft och metanol a?r tva? mo?jliga alternativ inom sjo?farten som kan uppfylla de internationella regleringarna fo?r utsla?pp, och har i denna studie ja?mfo?rts med tjockolja.

Since energy simulations are used to verify that projected residential buildings will reach the current energy requirements it is important that the results are reliable.This report investigates the extent of uncertainty in energy simulations, estimates the causes of the uncertainty and its economic and environmental consequences.The method used in this report is based on three validation methods; empirical validation, analytical validation and comparative validation. The analysis was carried out for five multi-family dwellings in Uppsala with installed meters for energy measurements. One of these objects, Klockarlunden, was studied in more detail than the others.The results show that the deviations are between 10 and 29% for the studied objects, which means that the uncertainty is estimated to be at least 29%. All simulations underestimate the buildings need of energy. The simulation for Klockarlunden can predict the energy consumption to be within the range of 46-98 kWh/m2year with 90% confidence level based on the current uncertainty.

Detta är en studie om klimatpåverkan i samband med anläggandet av järnvägsbroar i syfte att ta fram nyckeltal (moment, material, mängder) för att effektivt kunna reducera utsläppen av växthusgaser. Till grund för studien har vi arbetat med Trafikverkets verktyg klimatkalkyl 2.0. Det har granskats utifrån användarvänlighet och riktighet i indata och emissionsomräkningsfaktorer. Det för att se till skillnaden mellan modellen och ett unikt anläggningsprojekt, var skiljer sig Trafikverkets typvärden mot de projektspecifika förutsättningarna samt vilka blir dess konsekvenser?Studien har kommit fram till att utan viss försiktighet vid arbete i klimatkalkyl 2.0 finns risk för inkorrekta resultat.