To make it easier for forestry planning the forest owners needs data which describe characteristics of the forest. Such data you usually get from some type of inventory. A relatively new technology which probably is getting more important in the future, is laser scanning because of lower costs. But because the laser technology is relatively new you need to compare it with conventional inventory technologies to get better understanding of the possibilities the laser technology gives. This work intends to estimate field measured characteristics of the forest from laser data with help of regression analysis and then see which of the field measured properties that best could be estimated and which laser variables that gave the best results. This study shows that heights has the best estimates, but biomass, diameter and volume also gives good estimates.

Man?s impact on the environment is something that increasingly becomes topical in today?s society. Because of this, several companies have started to take interest in the effects they?re responsible for, not least considering their image. Emissions of carbon dioxide generated from goods traffic are accountable for a large part of the total emissions of greenhouse gases in the world.

The purpose of this thesis was to examine how locally produced bioenergy may contribute to meet the climate target year 2050 in the municipality of Uppsala. The goal of reduced GHG-emissions from current 6,8 ton CO2-equivalents to 0,5 ton CO2-equivalents per capita and year, year 2050 is based on avoiding harmful penalties of an increased level of GHG in the atmosphere. By estimating available biomass in the county together with examining future technologies and emission factors for the substrates used, four possible future scenarios has been developed focusing either on electricity generation or production of biofuels. GHG-emissions of year 2050 have been calculated using the software LEAP. The conclusion is that bioenergy, depending on how it is integrated in the energy system, may reduce greenhouse gas emissions between 0.6 ton CO2-equivalents and 1.4 ton CO2-equivalents per capita or 12% to 25% compared to 5.5 ton CO2-equivalents in the reference scenario 2050. The greatest reduction is obtained if biofuels are produced in combination with energy efficient heat requirements in buildings..

Formulation and testing of a new type of chainsaw lubricantThe company Agro Oil has come up with the idea of developing an environmentally adapted chainsaw lubricant with a new unusual base fluid. A field test with a tree-harvester shows unsatisfactory low temperature properties and high wear. In this work the viscosity, price and pour point of different combinations of the given base fluid and three other base fluids have been investigated. Desired viscosity and price are determined for different formulations. The new lubricants tested show lower pour points than almost all products on the Swedish market.A test equipment has been developed to investigate the wear.

Man?s impact on the environment is something that increasingly becomes topical in today?s society. Because of this, several companies have started to take interest in the effects they?re responsible for, not least considering their image. Emissions of carbon dioxide generated from goods traffic are accountable for a large part of the total emissions of greenhouse gases in the world.

Detta examensarbete presenterar metoder att göra refererande mätningar av elektromagnetisk kompabilitet (EMC) i samband med ethernetsignalering och en utvärdering av dessa metoder. Rapporten hänvisar till vilka standarder som gäller för mätning av emission och immunitet i EMClab samt hur dylika mätningar går till. Teori bakom differentiell signalering och ethernet redogörs i korthet.Rapporten introducerar läsaren till Motorola Mobility, deras set top-box VIP1853 och problematik aktuell för denna box. Undersökningar av VIP1853 presenteras och en diskussion förs kring mätteknisk problematik i samband med dessa undersökningar. De mätmetoder som testats och deras för- och nackdelar beskrivs.

The goal with this examination thesis is to investigate the difference in carbon dioxide emissions between a building with a wooden versus concrete carcassing from a life cycle perspective. The huge amounts of carbon dioxide released into air from human activities must be reduced to prevent serious consequences. A way to limit this issue is through performing a comparative study where the result shows which of two products with the same function has the lowest emission of carbon dioxide, whereof the product with the lowest carbon dioxide pollution can be chosen.To be able to perform a study like this an object has been chosen and studies about life cycle analyses have been done. The rental square meter, the thermal conductivity value, the energy requirements and the placement of the building has been set equal in both framework types. There were solely dissimilarities of the two buildings taken into account when this comparison study was performed.The result of the study is that a building constructed with a wooden carcassing has the lowest amount of carbon dioxide emissions.

This report is introduced with a presentation of fundamental electromagnetic theories, which have helped a lot in the achievement of methods for calculation and design of microstrip transmission lines and circulators. The used software for the work is also based on these theories. General considerations when designing microstrip solutions, such as different types of transmission lines and circulators, are then presented. Especially the design steps for microstrip lines, which have been used in this project, are described. Discontinuities, like bends of microstrip lines, are treated and simulated.

The tribo system ice-curling stone was investigated in order to understand the mechanisms behind the stones' behavior on the ice sheet. The problem with non-identical stones should also be addressed.The stone curls, that is, its sliding path deviates from a straight line to the right for a clock-wise rotation and to the left for a anti-clock-wise rotation. Several mechanisms to explain this behavior have been proposed over the years but none has been successful.By carrying out experiments at the local curling rink and studying silicon castings of ice- and stone-surfaces with scanning electron microscopy and vertical scanning interferometry, it has been decided that the curl is not due to dry friction, ice-debris or the difference in friction on the left and right side of the stone. The side force comes from the fact that the friction is higher at the back of the stone than at the front.The contact between stone and ice is never completely dry, nor in the hydrodynamic lubrication regime. It is probably a combination of hydrodynamic lubrication and a contribution from mechanical scratching of the ice.

The aim with this report is to formulate a strategic method to optimize selection processes of DNA-samples from a faeces inventory to identify as many individuals in as few analyzes as possible, and by that keep down the costs of brown bear management. Brown bear management in Sweden founds today on results from faeces inventory and is substantially led by the county administration boards. Data from the years of 2004 and 2009´s inventories in Västerbotten was used to test and evaluate different methods in selection processes of which faeces that should be sampled. Comparison were made between making selection by chance, by spatial distribution and by calculating variations in logistic regressions coefficient b, in other words bear density and probability in finding same individual in several faeces. We can show making selection by chance is the most uncertain method.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

Mitt examensarbete innefattar en fönsterutredning för radhusområdet Skeppsvägen i Bålsta. Fastighetsägare är Håbohus AB och examensarbetet har skrivits för Skanska Sverige AB. Arbetet har skrivits på plats i Bålsta där Skanska Direkt AB har eget kontor och erhåller idag totalentreprenaden för renovering av Skeppsvägen. Arbetets syfte är att klart och tydligt redovisa eventuell effekt och energibesparing vid byte av befintliga fönster och altandörrar.Undersökning av fönster och altandörrar har gjorts okulärt, med värmekamera och med fuktkvotsmätare. Vid den okulära besiktningen noterades färgsläpp på fönster.

With increased deployment ofintermittent renewable energy, such aswind and solar power, energy storagebecomes necessary to help reduceproduction peaks. Thermoelectric EnergyStorage is a method still in researchphase, which stores electricity in hotwater at a temperature of 120 ° C. Thisthesis aims to examine whether theThermoelectric Energy Storage would bepossible to integrate into existingpower generation such as a combined heatand power plant, and how the technologypotentially could function in theelectricity market. ThermoelectricEnergy Storage consists of a chargingprocess and a discharging process, bothoperating by the working fluid CO2. Toincrease the efficiency of theThermoelectric Energy Storage, wasteheat from the district heating networkis integrated.A model of the Thermoelectric EnergyStorage has been developed and it wascalculated by thermodynamic propertiesof the working fluid, CO2, in thevarious process steps.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

Syftet med denna studie var att utforma och reliabilitetspröva enkätfrågor om äldre personers attityd till styrketräning. En enkät bestående av 47 frågor och påståenden delades ut till 31 äldre (60-81 år) personer som fick besvara enkäten vid två separata tillfällen. Varje enskild fråga analyserades för test-retestreliabilitet på tre olika sätt: 1/ Intraclass correlation coefficient (ICC) 2/ Absolut reliabilitet med 80% respektive 95% konfidensnivå samt 3/ Proportion of agreement (PA) med PA% och PA ±1%. Enligt gränsvärden som sattes för acceptabel reliabilitet hade 16 frågor ett värde på ICC <0,50, 11 frågor ett pa(%) <60%, 16 frågor ett värde &lt;80% på pa ±1%, nio frågor en absolut reliabilitet av =>2,0 vid 95% säkerhet och 12 frågor en absolut reliabilitet =>1,5 vid 80% säkerhet. Dessutom visade analysen av absolut reliabilitet att det för 2/3 av frågorna krävs två skalsteg för att påvisa en skillnad vid 95% säkerhet.