In this two years master's thesis a regional project, Futurum.kom, is studied through the experiences of eight librarians from two of the participating libraries. The interviewees have all attended local and regional seminars where questions about core values, target groups and the role of the public library were discussed, among others. The seminars resulted in a number of core values and target groups. During the project, a number of advertising campaigns are to be conducted. The first one of these had recently been implemented at the time of the present study. The aim of the thesis is to investigate the interviewees organizational self-perception in relation to the project.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

In my project, Cups on the run, I have studied the relationship between ceramic utility objects and different environments, when moving them off the table. My background as a potter has been the starting point. From there, I wanted to see if I could expand my craft to the space beyond. With the cup, which for most people has a clear function and a relation to us human, in repetitive structure I explored the spatiality and architecture in various environments. Life fascinates me through how everything is made up of tiny parts that together create the tangible and intangible.

Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

In commercial firms, the inventory is often the largest and most important entry and to have acorrectly valued inventory is an important prerequisite in the statement of accounts. However,the inventory is considered to be one of the entries that are most difficult to value among thecompanies assets and this is why we have investigated how large commercial firms valuetheir inventories. We have used relevant theory and conducted a number of interviews withpeople who are knowledgeable when it comes to valuation of inventories. Our conclusion isthat commercial firms work in different ways and that there is no general method which isused by all commercial companies..

The study investigates the use of collection and treatment wagon for piglets in relation to castration. The importance of good and ergonomically designed tools in pig stables can probably reduce the risk of suffering from musculoskeletal disorders (MSD). During the last 20 years the number of pig farms has decreased and at the same time the herd sizes and the number of pig keepers have increased (Statistic Sweden (SCB) 2007). As a consequence, the pig keepers have more pigs to take care of, treat and neuter and spend more of their daily work in these large confinements. This also means that the repetitive work e.g.

Eutrophication of the Baltic Sea is a serious problem. A major contributing factor is diffuse losses of phosphorus (P) from agricultural land in surrounding countries. In order to estimate P losses, environmental monitoring of small agriculture-dominated catchments is being carried out in most of these countries. Evaluation of the risk of P leaching to waters is usually based on chemical tests originally developed to quantify the amount of soil P available for plant production. The tests are performed in different ways in the different countries and a number of different extraction agents are in use.

Background: Because of the high unhealthy rates among women in the com-mune a project to reduce it have begun. For this reason we have been given the mission from the commune of Sotenäs to study the character of these women's health. Objective: To study the health among permanent employed women in the commune of Sotenäs. Method: Quantitative method. The data have been collected through question-naire survey.

The voltage level in the power grid varies due to variations in load and production. Normally these variations are manageable, but they may be excessively large during a disturbance. If the voltage is too high it may damage the equipment in the grid and too low voltages may cause problems like voltage instability. The magnitude of the voltage variation depends on the short circuit power capacity of the point of interest.This problem may become lore prominent due to automatic voltage regulation that acts on shunt reactors and shunt capacitors. When the shunt reactor is connected or disconnected to the grid it may cause such large changes in the voltage that the shunt reactor starts hunting.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

AbstractTitle: Coach, vän eller både och? ? en kvalitativ studie om coachning inom arbetslivetAuthors: Jonas Näslund & David ÖhrlingTutors: Ulla Moberg & Larsåke LarssonPurposeThe purpose of this thesis is to examine how coaching in working life serves, aiming to find what influences the interaction between coach and client. To seek to answer the purpose we raised a number of research questions which discussed, among other the coach's intentions and the parties' relationship.TheoriesThis thesis is based on a number of different theories, where the Leader-member Exchange Theory is considered the main theory. LMX is used when studying the relationship between a manager and an employee. Other theories used in this thesis are for example the Social exchange theory and one-on-one-coaching.MethodThe methods used in this thesis are semi-structured interviews, observations and recordings of coaching sessions.

Background: The audit has not always been as it is today. The first law requiring auditing was legislated in the Companies Act 1895. Many events have taken place in the audit history; among them was the Krueger crash, which affected the auditing profession hard in Sweden. This led to new recommendations and laws that would save the profession. Because of the events in the past, there are many who question the audit profession and discussions have been held regarding the auditor's independence and objectivity.

The poultry red mite, Dermanyssus gallinae, is a common problem in poultry facilities, causing great discomfort for the hens and effecting the production economically. Few efficient acaricides are available and there is a need for new control methods since resistance has become a problem in some cases. The aim of this study was to evaluate the efficiency of the new liquid silica control agent Ectopar, on the poultry red mite. An initial in vitro test of Ectopar and its two components individually was performed, where live mites were sealed in together with filter paper impregnated with one of the three solutions prepared. The survival of the mites was thereafter recorded repeatedly during a period of 120 hours and compared to a control. For the field study, two poultry farms with different housing systems were used, one with furnished cages (farm 1) and one with a single tier floor system (farm 2).

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

The purpose of this candidate thesis is to obtain an overall picture of how many prohibitions against owning or taking care of animals that were announced in Sweden in the years 2006-2008 and on what basis these judicial decisions were taken. What is the situation for the person behind the judicial decisions? Is there a so-called risk category where preventive actions to solve the problem can be taken at an earlier stage?The first Swedish animal welfare legislation came into force in 1944. Previously there was a law of 1857 that only prohibited the maltreatment of farm animals. In 1988 the existing animal welfare law was revised into an in principle new law (1988:534).As early as in the Royal Majesty?s government bill (1944:43) to the 1944 animal welfare legislation, there was a proposal that issued prohibition for those having been convicted of aggravated cruelty to animals.