This study was conducted at VikingGenetics' bull breeding station in Falkenberg, Sweden. The bulls waiting for the results of their progeny testing at this station are either kept in group housing or individual housing. Since both of these housing systems have advantages and disadvantages, it was in the interest of VikingGenetics to know which of these housing systems is the best. The aim of this study was to investigate the welfare of the bulls in these two housing systems through behavioural observations and the use of activity monitors. In the preparations for the study 16 bulls, 8 in each housing system, were chosen.

This study will shed light on the subject of system management and system management models. It is important that everyone within an administrative organization understand business objectives and needs of the users who work with the systems. It is vital for the activity to form a structured approach for its management, which includes a system management model. Every company has its individual system management model that is tailored to support their management of a business IT systems. According to Brandt (2000), a system management system model is defined as "an idealized image of how you want the system management work is conducted".

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

Milkability or ease of milking, has higher importance today for Swedish dairy cattle producers after the introduction of milking parlours and automatic milking systems. Milkability is the cow?s ability to quickly milk out and be completely milked. There are several measures of milkability available. Today the farmer measures the traits subjectively in relation to the conformation scoring of the cow 30-270 days after her first calving.

This thesis gives the reader an understanding for newsletters within e-commerce, and how to work with them as a channel for marketing. Furthermore it explains the technical and graphical demands, and how to ensure that the newsletter reaches the intended receivers.A successful newsletter can entice people to shop, but can also help to strengthen a brand and the relationship between the customer and the company. During the writing of the thesis, it has emerged that the most important part of a newsletter (which also determine whether or not the receiver reads the letter) are the subject heading, sender, layout, headlines,images and the deregistration link.A part from working with the different parts of the letter, the sender should also be aware of the technical and graphical demands. Since the E-mail clients are looking out forimages, fonts that are not embedded in the computer, and for questionable words there?s a big risk for ending up in a spam filter when not considering the demands.

The purpose of this report was to compare Lilluns egg production with other Swedish egg producers based on the flow of nutrients (nitrogen, phosphorus and potassium) in the egg production systems. The main focus in the report was the utilization rate of the forage and the excess of nutrients per kg egg. Additionally, the purpose was to identify the environmental impact from Lilluns egg production and compare the results with other egg producers. The inflow of nutrients associated with forage and poultry was compared with the nutrients that were exported from the production. All of the egg producers in this study had an excess of nutrients.

Ravelsmarks gård have now reached the stage when there are few options for the future. The options are either a construction of completely new farm buildings or a winding up of the milk production. Present on the farm today there is 65 dairy cows plus recruitment. 44 cows stand in long-stalls and 20 cows stand in short-stalls. The objective of this study was to examine the profitability of a completely new cowshed. In order to get costs for investments different milking systems and equipment for feedstuff have been compared. The systems in the investment budget have been chosen on recommendations from advisers, salesmen and on the basis on what is suitable for the farm. One system where a so-called mix feeder wagon is used for the roughage seemed to be best suited for Ravelsmark. The different prices obtained for the manure well show that there are possibilities to decrease the investment costs.

This is a report of our examination project in electronics carried out for Bofors Test Center in Karlskoga. The task was to construct an electronic devise for starting up different kinds of measuring systems in exact time during test sequences. The modules that are used today are old and unreliable. Our goal was to construct a prototype, which later on is supposed to be developed into a useful system..

WSP Systems i Växjö är ett konsultföretag som projekterar elanläggningar för allt från bostäder till industrier. Vår uppgift är att utifrån en kravspecifikation och arkitektritning ta fram ett ritningsunderlag för en mindre kontorsbyggnad på Ljungby lasarettsområde. Uppgiften går ut på att ta fram kanalisation-, kraft- och belysningsunderlag både med datorprogram och genom teoretiska beräkningar..

The purpose of this master thesis is to investigate different types of measures for making buildings more energy efficient and to estimate their profitability. The calculations were performed with the building simulation program VIP+ and the evaluation of the profitability with the life cycle cost method. Furthermore, it was examined how losses in the distribution of secondary systems of district heating can be avoided. Options to replace district heating with a local district heating system based on bio-energy have been investigated. The possibilities of achieving more efficient thermal energy consumption and production for the chosen estate were also examined.The object of the study has been a residential estate with 133 detached houses in Uppsala, built in 1974.

This report is introduced with a presentation of fundamental electromagnetic theories, which have helped a lot in the achievement of methods for calculation and design of microstrip transmission lines and circulators. The used software for the work is also based on these theories. General considerations when designing microstrip solutions, such as different types of transmission lines and circulators, are then presented. Especially the design steps for microstrip lines, which have been used in this project, are described. Discontinuities, like bends of microstrip lines, are treated and simulated.

Workers are more demanding than ever and stay a shorter amount of time within the same organization. For this reason we wanted to look further into how organizations work with motivation in order to create success in Knowledge Intensive Firms. The complexity of knowledge workers formed the base for our interest within the subject. The purpose of our thesis is to reflect upon what is written about the motivational effects of recruitment and reward strategies in Knowledge Intensive Firms. Further our essay is based on an abductive advocacy.

This is the end report of my final exam at Medieteknik. It covers the planning, work process and review of a Flash based web application that I set out to do. The goal was to create a user friendly, interactive e-shop with embedded functionality for playing music, displaying rich media content and researching possible payment solutions, to enable buying music files online. The project involved creating the user interface, the programmatic functionality of a Flash client (an SWF file). Also, setting up an Apache HTTP Server and establishing a working ?bridge? between the Flash client and the web server with Flash Remoting components and AMFPHP.

The aim of this thesis is to illustrate the content of the democratic values tolerance, personal development and political equality, in relation to the Swedish school?s systems fundamental values, and from there problematize the schools approach towards the Sweden Democrats. By using a qualitative text analysis upon the party program of Sweden Democrats, we have been able to fulfill the aim of the thesis. We have motivated and defined our chosen democracy values from the schools fundamental values and from democracy theory. With the use of an analyze schedule we have been able to go through with the interpretation and analyze of the party program of the Sweden Democrats.