During test flights SAAB uses the data acquisition system COMET 16. The part of the system that receives the signals from the sensors and converts them is called KSM 15. The purpose of this thesis is to develop a data acquisition module on stacked PC/104 modules with a lower production cost. Our work has been divided into one part about analog signal conditioning and a second part with digital filtering and memory management of the sampled data. The analog part, designed of regular components like instrument amplifiers, voltage references, operational amplifiers and multiplexers, adjusts the sensors signal levels for the ADC?s that converts the signals.

The changes in the Swedish meat- and meat processing industry have been substantial in recent years. These changes will alter the business environment for many companies. In order to be prepared to face new threats and new opportunities, companies should be actively working on these issues. Risk awareness and by developing of risk management strategies companies can act quickly and effectively when the conditions changes. The objective of this study is to analyse whether and why companies in the Swedish meat- and meat processing industry use various forms of risk management strategies.

This work was conducted during spring and summer 2012 together with the company Uppsala Academy of Management as the principal. The two main objectives for the work are that: ? Make a comparison between the measured volume in the standing forest and the measured volume at the industry on Uppsala Academy of Managements actual stumpage sale volume to see how well it conforms. ? Examine if the buyers see any particular advantages or disadvantages of actual stumpage sale volume and what they think of Uppsala Academy of Managements actual stumpage sale volume and structure in general. I chose to use actual stumpage sale volume from the tree years 2009, 2010 and 2011 in my work. I divided the actual stumpage sale volume following four categories which was pine, spruce, pine/spruce and seed trees. After that I picked out sixteen actual stumpage sale volumes from each category to be a part of the work.

In this Master's thesis, a direct-conversion receiver front-end has been designed in a 0.18um CMOS technology. Direct-conversion receivers (DCR) have obvious advantages over the heterodyne counterpart. Since the intermediate frequency (IF) is zero, the problem of image is circumvented. As a result, no front-end image reject filter is required and the channel selection requires only a low-pass filter, which makes it easy to integrate directly on chip. However, the DCR also suffers from several drawbacks such as extreme sensitivity to DC offsets, 1/f noise, local oscillator (LO) leakage/radiation, front-end nonlinearity and I/Q mismatch.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

Millions of preselected progeny have been born since the development of The Beltsville Sperm Sexing Technology 1986. The method is based on flow cytometry and sorting is done on the basis of DNA difference of the X- and Y-chromosomes. Preselection of progeny provides an opportunity to obtain genetic gain and increased production as well as increased animal welfare and decreased environmental impact. However, the method is associated with low fertility, high costs and uncertainty whether the sorting process contributes to DNA damage and thereby results in genetically impaired progeny. Today, sex sorted sperm is only commercially available in the bovine industry, due to the fact that bull sperm is more suitable for selection than sperm from other species.

Vår uppgift var att praktiskt genomföra och utvärdera två kalibreringsmetoder för modväxlande kammare hos Saab Avionics AB i Linköping. En metod som Saab Avionics använder och en metod enligt europeisk civil flygstandard, EUROCAE ED- 14D kapitel 20.6. Uppgiften löstes genom att utföra mätningar enligt de två kalibreringsmetoderna och därefter analysera mätdata i MatLab. Vi hann med att göra Saab Avionics kalibreringsmetod i samtliga mätpunkter som krävdes för utvärderingen, men bara drygt halva kalibreringen enligt europeisk civil flygstandard. Utifrån de mätningar vi gjort kan vi dra följande slutsatser: Båda kalibreringsmetoderna säger att Saab Avionics modväxlande kammare uppfyller respektive krav när den är olastad.

The thesis demonstrates a low-cost, low-bandwidth and low-resolution Analog-to- Digital Converter(ADC) in 0.35 um CMOS Process. A second-order Sigma-Delta modulator is used as the basis of the A/D Converter. A Semi-Uniform quantizer is used with the modulator to take advantage of input distributions that are dominated by smaller-amplitude signals e.g. Audio, Voice and Image-sensor signals. A Single-bit feedback topology is used with a multi-bit quantizer in the modulator.

This master thesis has been written in collaboration with Science Park Jönköping and is based on a problem related to corporate innovation. Science Park Jönköping believes that there is an untapped potential in existing industry in the form of ideas that are never commercialized. These theories are also supported in the research in which other authors have perceived that the ideas and inventions which do not belong to the core business risk ending up in drawers. If more of these ideas could be spin-offs or other forms of enterprise instead of staying in the drawers it would lead to growth, both for companies and for the society in large.The purpose of the thesis work is to, based on the case Science Park Jönköping, analyze how science parks and incubators can support the commercialization of ideas that derive from industry, who otherwise had been left lying. The work began with a mapping of the Science Park Jönköping operations and the skills they possess, and then other initiatives that aim to commercialize more ideas from companies were examined.

Abstract Title: Municipal property companies CSR investments Seminar date: 2015-05-28 State university: Halmstad University Institution: School of Economics, Technology and Sience (ETS) Level: Bachelor Thesis in Economics, 15 hp Authors: Carl Berg von Linde and Martin Samuelsson Examinor: Jan-Olof Müller Supervisor: Eva Berggren Number of pages: 39 Attachments: 3 Keywords: CSR, Municipal-owned housing, Social- and environmental responsibility, Strategic CSR, Legitimacy, Levers Research question: · How do municipal Swedish real estate companies invest in CSR and why? Purpose: The aim of this study is to understand how three municipal property reasons around investment in CSR and to identify different factors why investing in CSR differs between municipal property companies. Methodology: A qualitative study with abductive conducted semi-structured interviews of three municipally owned housing companies. Conclution: The municipal real estate industry uses CSR as a strategy to gain different benefits such as brand recognition. By acting responsibly, companies will strengthen their legitimacy and create long-term economic gain.

Introduction and research question:  This study investigates the widely discussed notion ?Corporate Social Responsibility? and its practice in the tourism industry. In the contemporary society more companies are realizing the significance of Corporate Social Responsibility (CSR) and its potential as a means of differentiation.  The author?s interest in this particular phenomenon was awakened after reading about the business case of Scandic Hotels. This is a company that nowadays is referred to as ?Scandinavia?s leading hotel chain?.

Since the Chinese economy?s reform in 1980, it has been attracting enormous foreign investments. Many Swedish firms from different sectors such as technology, manufactory production, consumer, service industries and so on, had started their investments in China. China has become the first choice for global manufacturing due to the huge market, continuous economic growth, stable political situation, sound investment environment and the WTO membership. In addition, China's enormous potential in finance, service, infrastructure, telecommunications, wholesales and retail industries will also attract a great deal of foreign capital.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

The productiontime in the construction industry contains of many different participants which will take part in different events. When there is so many people working with the same project it is easy tosee one self just as a part of the game. The consequence of this is that they don?t see themselves as important participants whos knowledge, opinions and experience can be useful in the whole production process. This might lead to that they feel neglected and the consequence of that will be lackof motivation.

Bravida is one of Scandinavia's leading suppliers of technical installations and services. According to Bravida an installer loses around 35 per cent of their daily work. It?s the time aspect that?s going to be examined in this thesis. The purpose of this thesis is that the student in question is to investigate the activities of the installers that works with this project, identifying where and how time losses occur and come up with suggestions for improvement.Methods used in this work is literature studies, observational studies and interviews.