This paper examines women's positions in the music industry. By quantitativelyinvestigate ten major companies on the swedish music market, the authors have beenable to mapp positions that are dominated by women and as well as men. The essaydiscusses several theories of both gender in organizations and gender in society inorder to analyze the quantitative results.The aim of the paper is to highlight the current segregation of careers in the musicindustry as well as to lay a foundation for further research on why it is segregated.Clear graphs shows the gender distribution between women and men in business butalso the distribution of gender in occupations / positions in similar companies. In theanalysis the authors reflects on the results using relevant gender theories. In theconclusion, the authors explain the result generated by the analysis and illustrates theprevailing segregation that exists in the music industry.This paper has concluded that a seemingly even distribution between men andwomen in business organisations can sometimes be misleading.

The aim and goal of this work has been to design and implement a voltage reference network for a 12-bit PSAADC, Parallell Successive Analog to Digital Converter. A chip containing the design has been sent away for fabrication. Because of the long processing time, no measurement data are presented. The main specifications for the voltage reference generator is to generate stable reference voltages with low noise and a good PSRR. Efforts has also been made to minimize the power consumption..

Abstract CORDIC (Coordinate Rotation Digital Computer) is an iterative algorithm for the calculation of a two-dimensional vector in circular, linear or hyperbolic coordinate systems. This paper presents a survey of known CORDIC algorithms and architectures for the rotation and vectoring mode in the circular cordinate system. In addition an implementation of the differential CORDIC algorithm in VHDL has been done. The implementation is designed to keep the fast timing and throughput characteristic known for on-line redundant arithmetic..

This report deals with the modeling of a part of the communication system based on the IEEE 802.11a standard which represents the next generation of wireless LAN with greater scalability, better interference immunity and significantly higher speed, up to 54 Mbps. 802.11a uses Orthogonal Frequency Division Multiplexing (OFDM) where modulation is performed by an IFFT and the demodulation by an FFT. After modeling the FFT in Matlab and C, the FFT implementation has been validated using a soft microprocessor core by Xilinx (Microblaze) and the results were compared..

The everyday work at a staffing agency and how its leaders deal with the problems that appears: A case study at Maxkompetens.The purpose of this paper is to increase the understanding of how leaders at a staffing company deal with the everyday problems that arise from a geographically dispersed workforce.The staffing industry has grown by 30-40 percent annually and has over the past 15 years been the fastest growing industry in Sweden. This shows that the interest and demand for the staffing industry and its activities are now rising at an increasingly faster pace. This is an industry that is operating under specific conditions and with a geographically dispersed workforce. This will make the leaders of a staffing company to an important link between the staffing leaders and the staffing personnel.The relationship between the staffing company's leaders and its personnel is important, but not completely trouble free. Difficulties arise in that the employees may be located in different places and at various client companies with the result that the leaders of the staffing company cannot have a daily personal contact with their geographically dispersed personnel.We have used a qualitative approach on our paper and our empirical methodology has been a case study with ethnography and interviews.

Personal branding is a common phenomenon within the Swedish business world, although less applied on the competitive and fast paced music industry. In order to strengthen Swedish artists' personal brands and to ensure congruence between the artists' presented identities and the target audiences' perceived images, we have developed a model, containing of seven essential factors. The seven dimensions authenticity, credibility, certainty, openness, availability, awareness and timeliness help improve strength when communicating brand identity, as well as minimizing potential discrepancy between identity and image. This report examines the brand strategies within the Swedish music industry through a case study of Sweden's largest pop star, Eric Saade, where Team Saade's communicated identity is compared to the targets audience's perceived image of Saade. Overall, Saade's personal brand has a high level of congruence, except from the clarity dimension, where his words are considered differing from his actions.

The purpose of this study was to get an idea of ??how the leaders in the real estate industry perceive and manage boundless working conditions. Questions that were answered were how the leaders in the service influence and control the employees' working conditions. Also how the communication strategies are designed to facilitate the work towards common goals, when tasks are not limited to the workplace. The study examine if boundless working conditions is characterized by unspoken expectations.

Since the turn of the millennium a sharp increase in the interest for bio energy has been observed. Important reasons for this growing interest can be due to the fact that fossil fuels are a finite resource. A net discharge of greenhouse gases occur when fossil fuels are burned. The discharge of greenhouse gases are considered to be the main reason to the greenhouse effect. Means of control to increase the use of bio energy has been introduced and, as intended, the use of bio energy has increased. As a result of the legal provisions the ability to pay for bio energy has increased, which the forest industry view as a problem.

This is a report for a bachelor degree thesis in electronics at Umeå university. The target was to design a fully functional PCB-layout and then solder components to it. In order to do that I had to first proofread a schematic of the system to find things that were not correct and correct them. The project is a cooperation between the author and the company Calmon Stegmotorteknik. During the whole project the people at Calmon supported the author with the appropriate knowledge to complete the tasks.

The everyday work at a staffing agency and how its leaders deal with the problems that appears: A case study at Maxkompetens.The purpose of this paper is to increase the understanding of how leaders at a staffing company deal with the everyday problems that arise from a geographically dispersed workforce.The staffing industry has grown by 30-40 percent annually and has over the past 15 years been the fastest growing industry in Sweden. This shows that the interest and demand for the staffing industry and its activities are now rising at an increasingly faster pace. This is an industry that is operating under specific conditions and with a geographically dispersed workforce. This will make the leaders of a staffing company to an important link between the staffing leaders and the staffing personnel.The relationship between the staffing company's leaders and its personnel is important, but not completely trouble free. Difficulties arise in that the employees may be located in different places and at various client companies with the result that the leaders of the staffing company cannot have a daily personal contact with their geographically dispersed personnel.We have used a qualitative approach on our paper and our empirical methodology has been a case study with ethnography and interviews.

The concept of green IT is a hot topic in the industry right now. The requirements forenvironmental friendliness are becoming increasingly common. There is a lack of knowledge andunderstanding of what green IT means and how it can be achieved. Our study shows that the useof ICT can never become entirely green, but a lot can be done to become greener. We haveproduced a balanced scorecard which in theory leads to better governance, increased knowledgeand a common picture of what the work of greening IT means for employees and theorganization.

The Swedish automotive industry has since way back been struggling with bankruptcy, abroad buy outs and staff cuts. Competition and pressure on prices are two factors that affect the automotive industry. Because of this, the companies are pressured to continuously developing their work in addition to be able to compete on the market. The aircraft industry has successfully managed to implement additive manufacturing (AM) and for motorsport has several components manufactured with AM been used. When AM is used as a manufacturing method, there are a number of advantagesthat follows.

Corporate Social Responsibility (CSR) is a topic that is becoming increasingly important in today's society. CSR is a concept whereby companies voluntarily integrate social and environmental concerns both in their business but also in interaction with their stakeholders. The society of today sets high expectations for how companies take their social responsibilities, especially in industries where the risks to individuals and the environment are high. In this study, we tried to answer the following questions; what kind of responsibility do companies in the plastics and chemicals industry claim to take and why might this be due? What differences exist between the investigated companies in the industry and what may these differences be rooted in? The purpose of this study was to obtain an understanding of the interest in working on sustainability in the plastics and chemicals industry.

Since a few years back television has been on a verge of an enormous digital change. Web-TV is now growing at an incredible rate and is said to completely change the way we consume TV. The purpose of this essay is to determine and gain an understanding of how representatives of the broadcast industry looks at the phenomenon of web-TV and especially the different kinds of online video services and how they believe this will affect the television. Methods used are qualitative interviews which we compared with previous studies on the subject and acknowledged communication theories. The respondents were people with good insight and understanding of the media and TV industry.

This paper aims to analyze the legal functions and characteristics of bills of lading in their basic form to examine the legal framework for the adoption of electronic bills of lading under Swedish law. With a comparative analysis against English law, particular attention is given to the 'document of title' function. This has been claimed to pose challenges in the transition to electronic bills of lading. While Swedish law presents potential parallels, critical aspects like negotiability and indirect possession require resolution. It analyzes international regulations such as the Rotterdam Rules and Model Law, addressing challenges and potential solutions for digitalization.