Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

Scholarly publishing has since the introduction of electronically distributed periodicals seen a time of change, mainly in the STM-business (Science Technology and Medicine). The roles of the three main participants in the publication process; researcher, publisher and library are developing into new directions. Researchers themselves are taking a more active part in the discussion, with the boycott list from the Public Library of Science organization as an illustrating example. Reforms are being launched partly as an economical and efficiency issue, partly as an increasing desire from researchers to maintain the control of scientific end result. This Master s thesis examines how the partly conflicting goals of the participants affect the conditions for scholarly publication in an electronic environment.

Uppsatsen Ingenjörkompaniets förändring från NBG-08 till NBG-11 ? En myt eller sanning? behandlar ingenjörkompaniet under Nordic Battlegroup-08 respektive Nordic Battlegroup-11. Uppsatsens skildrar de skillnader vilka fanns på respektive kompani avseende organisationen, materiel och utrustning samt de krav och uppgifter vilka kompaniet hade. Detta har genomförts med en komparation mellan de respektive kompanierna.Syftet med uppsatsen är att se vilken inverkan tidigare organisationer har på framställandet av en ny organisation under respektive Nordic Battlegroup. I detta fallet ingenjörkompaniet under respektive Nordic Battlegroup.En komparation mellan de två olika kompanierna innefattande tre av de grundläggande förmågorna verkan, rörlighet och uthållighet har genomförts kopplat mot två av krigsföringsförmågorna, konceptuella- och fysiska förmågorna.Resultatet av studien visar att slutsatser kopplade till i huvudsak brister kring kommunikationen mellan respektive ingenjörkompani där inget eller mycket begränsat erfarenhetsutbyte genomförts mellan dessa.

This thesis is about making a support for barcode readers and RFID readers on a computermounted in heavy vehicles. The computer has several applications designed for heavyvehicles such as an order handling application. The goal was to suggest an architecture toimplement a support for the readers. The architecture should be independent of whichmanufacturer who has made the reader hardware that was connected to the computer.At first a theoretically study was made around RFID technology and standards for thetransport and supply sector. Then the architecture was developed and a demo implementationwas made.The conclusion of this thesis is to implement support for barcode readers with a wedgeapplication.

District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

In 1896, a French cinema pioneer named George Méliès demonstrated that an object could be set to motion by changing the objects shape or movement frame by frame. But it was not until the early 1900s that this specific genre of filmmaking became a great success. The animations were essentially short and were animated and published in The United States of America. The interest in animated movies began to increase, not only in the west, but also in Europe and Asia. The art of animation grew especially popular in Japan, and emerged as a parallel to Japanese comic books known more commonly as Manga.The history of Japanese animation is not as commonly known as the history of American animation.

This literature research is meant to answer the following questions: ? What was the Swedes consumption of fat from 1935 to 2009? ? How has the fat consumption corresponded to the current recommendations? ? What is LCHF and which are the main advantages and disadvantages? Fat supplies us with energy, isolates and protect organs from bumps and punches. Fat is insoluble in water but soluble in organic solvents. The properties of a fat depend on its structure. The most common fat in human food is triacylglycerides.

Logistic Culmination ? One or Two Sides of the Coin?An Observation From a Different Point of View Logistic culmination can be compared to a stretched rubber band. If combat units moves in direction away from the supplies the rubber band will gradually stretch. The rubber band will eventually burst and at that point the logistic culmination will be a fact. But if the rubber band was to be let go before bursting, it will instead be contracted.

During the last years, the pharmacy market undergone major changes. Re-regulation that has been done in 2009 meant that monopoly was unlocked for competition. In a market where firms offer equivalent products, increases the importance of delivery service as competitive tool to differentiate themselves among the crowd. This also applies to pharmacy market where the supplies of goods in large way consist of equivalent products regardless of the company.This case study observes the importance of delivery service in terms of competitive tool on pharmacy market by focusing on a company?s improvement in delivery service.

ObjectiveThe objective of this study was to investigate the clinical application to use ASSR in anesthetized childrenDesignOne main ambition of the investigation was to compare hearing threshold using ABR with estimated hearing threshold using ASSR. Another aim was to examine if the duration of an ASSR measurement could be reduced by only using the frequencies 1, 2 and 4 kHz and exclude the frequency 0.5 kHz. This is a retrospective study using electrophysiological measurement from a database.ResultResults showed a high correlation between hearing threshold using ABR and estimated thresholds using ASSR, with the frequency 0.5 kHz showing a slightly lower correlation. Result also showed that the test duration was increased when using all test frequencies in ASSR-measurement compared to when 0.5kHz was excluded. ConclusionThe study showed a high correlation when comparing hearing threshold using ABR and ASSR.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

Globalization and demographic changes are forcing today?s companies to be more competitive in order to reach success. The increasing competition is proving a challenge for companies to recruit and retain competent, talented staff. To meet these challenges, Talent Management was developed during the 1990s and supplies a new and innovative way to deal with personnel management. Due to Talent Management being a relatively new theory, there is at present no generally accepted definition of the theory.

The society today, reflects a high welfare, where the human being has a better financial position than before. This has generate that more money is spend on pleasure and events. A result of that can be the development of a new line of business; The industry of experience.This kind of branch is fast growing in the Swedish labour market. The characteristics of this branch are, depending of trends, continuous variations and integrated education.A new phenomenon within this branch is ?Centre of experience?.

AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).