This master thesis is a result of the work carried out for Research Electronics at Siljansnäs. The company develops customized electronical systems. Because of the rapidly increasing interest in colour displays there has been a desire within the company to represent information from sensors and electrical systems in a more advanced way.Due to the mentioned reason above we were given the assignment to solve how a colour display using the STN technique works. The technique is used by small displays, the size of QVGA. Our ambition of this diploma work is to develop a fully functionally test prototype to evaluate the LCD (Liquid Crystal Display) and the LCD controller.

In today?s world there are plenty of technological tools and methods available with the purpose to increase peoples motivation for a healthier lifestyle. One such tool is a so-called activity tracker which uses sensors to log the user's everyday life and present it as automatic feedback. Gamification is a new and successful method to motivate and engage people in fulfilling tasks by using game elements and mechanics. In this study, five participants were instructed to use the activity tracker and pedometer Fitbit Flex daily for three weeks. Halfway through the study the participants were ranked and listed against each other in a ranking list in order to evoke competition.

Babies born prematurely are deprived of normal sensorimotor stimulation when placed in an artificial environment, the incubator. The aim of this project was to design a series of products that could promote the baby?s emotional and neurological development, and to facilitate parental bonding. The products designed in this project has a theoretical basis on the research available today on cognitive and emotional development in children born prematurely. They were developed in close cooperation with a group of parents and nurses in a neonatal intensive care unit.Presence is a product collection for developmental care, consisting of a mattress, a figure and a necklace. The mattress has vibration sensors that transfer the mother?s heart beat and speakers with recorded heartbeat and her voice.

Nordic Paper Åmotfors tillverkar elektrotekniskt papper som används till att isolera lindningarna i transformatorer. Det är viktigt att bibehålla papprets egenskaper under en mycket lång tid då en transformators livlängd är lång. Syftet med detta examensarbete var att undersöka huruvida tillsats av en kemikalie bestående av dicyandiamid kan fördröja åldrandet av de papper som Nordic Paper tillverkar. Förhoppningen var att deras papper därefter skulle klara de krav-parametrar som finns för papper som åldrats i olja. Kemikalien som användes var Cartafix® WE liquid.Försök utfördes där olika kemikaliedoseringar tillsattes i mälden.

The purpose of this study was to find out if motion movements, e.g. number of lying bouts and lying time with a registered activity monitoring sensor can detect an impending calving and thereby be used as a measure and an indicator for an upcoming calving. For this, automatically step sensors were used and were attached to one of the cows? hind leg. The sensor registered the individual step and movement activity of the cow.

The assignment is issued by Scania Maintence AB seeking a new approach to detect power changes in their industrial processes. The work has taken place at Ångströmslaboratoriet and tests have been performed at Scania AB Södertälje.Today?s society consumes enormous amount of energy. In both economically and environmental view, it is important that the processes are effective, with high power factor. There are many ways to measure power in the industry, what they all have in common is that the installation is advanced, requires time and planning.

In this master thesis a robot arm belonging to an automatic milking machine from DeLaval is investigated. The robot arm is controlled by a pneumatic cylinder and a valve. The goal of the master thesis is to investigate instability problems and to find out if it is possible to solve them by using gain scheduling. Gain scheduling is a type of controller where the parameters of the controller are changed during operation, for example depending on the working point. First a nonlinear mathematical model of the system was made.

In a multi-year project at Swerea Swecast AB studies on influence of dissolved gas on inclusions have been made. The knowledge about these parameters could be used to increase the quality of the final steel casting. The purpose of this thesis was to closer examine the impact of the oxygen level on inclusions.The questions asked were:? What was the amount of inclusions at different levels of oxygen?? What was the size of these inclusions at different levels of oxygen?? What does the inclusions consist of at different levels of oxygen?This was studied by measuring and sampling, sample preparation and microscopic analysis using an optical microscope and a scanning electron microscope (SEM). Measurements and sampling was performed at Smålands Stålgjuteri AB in Eksjö and at Swerea Swecast AB in Jönköping.

This thesis has been carried out in cooperation with a company which develops mobile sensor platforms. The sensors measure different types of data such as temperature, pressure etc.. They will communicate through the internet with a server that stores data in a database. This system will be controlled and monitored through a web page. The project's aim has been to develop this system and to implement a server, a database, a website and a client application that simulates sensor signals.

This is a final thesis done at BT, considering one of their forklift truck models called Reflex. The first part of this report is about a preliminary investigation investigating what kind of diagnostic systems BTwants to use, and also which demands there are to meet all expectations on such system. Secondly a diagnostic system, which will show if the drive wheel is worn out, will be presented. In the preliminary investigation, two kinds of diagnostic systems were mentioned. These were Model based diagnosis and Predictive analysis.

The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

During the development of microwave based sensors such as radar target seekers, input signals are needed to verify the performance of the system. Therefore, a channel board has been developed by previous thesis projects at Saab Bofors Dynamics. It uses a technique called Digital Radio Frequency Memory (DRFM). The purpose of this board is to sample and digitally store radio frequency signals in order to reconstruct them after a certain delay.The aim of this thesis project was to use the channel board named above to construct a portable instrument for generation of stimuli signals. This assignment has been divided into two tasks: firstly, to construct and put together the hardware components and secondly, to implement a graphical user interface for the instrument.

This master thesis has been carried out on behalf of Stoneridge Electronics AB and is an investigation ofhow intelligent switches can replace the traditionally used direct controlled switches. The concept ofintelligent switches is that the switches contain electronic identification components which, by connectingthem to a network, give the same function independent of the location of the switch. This infers anincreased flexibility and configurability which can be a great advantage in development, production andcustomization in the commercial vehicle industry. Especially in the current situation when commercialvehicle manufacturers provides more and more functions and dashboard configurations.LIN (Local Interconnect Network) is a network protocol introduced in 1999. It is a simpler and lower costcomplement to CAN (Controller Area Network) and is adapted for applications where the demands forbandwidth are lower, for example reading sensors and switchers.

Within literature, politics and science, there is a claim that ?tree avenues are important?. But the question and the goal for this essay are to explore the pretext to how and why. Planting tree avenues is a 4000 year old tradition and they are a common element in the Swedish and Scanian landscape since the 18th century. They were first mainly planted by aristocratic land-owners or on their initiative, but since the 19th century also by farmers.

One of the main tasks of the Swedish Armed Forces over the past few years has been International assignments, which increased the importance of the Lessons Learned process. Methods of simulator training with computers have become more frequent and the technical ability to collect digital data from sensors has been developed as well. This work demonstrates how the experience of Lessons Learned can be communicated with the computer simulator StriSimPC and how modern technology in future support experiences from the Lessons Learned process at the tactical level in the Army.Currently knowledge sharing consists of several processes and strategies in the Swedish Armed Forces. This is done by written reports, oral presentations and different practical exercises.This case study shows the functions of the simulator StriSimPC, methods of training and how it is used today. The study also describes the future opportunities, where digital metadata acquired from the modern combat vehicles could contribute sharing of experience in the Lessons Learned process.The summarized conclusions indicate that StriSimPC can combine the two strategies for personalization and codification of knowledge transfer to reach a higher level of learning.