As demand for renewable energy is increasing rapidly, the market for biomass pellets is expected to continue to grow in the near future. Most of the new raw materials that are discussed for pellet production have one thing in common; the production costs will increase compared to using traditional raw materials such as sawdust and planer shavings. The aim of this thesis is to investigate to what degree increased use of new raw materials for pellet production will affect the general pellet prices in Sweden and to survey what plans Swedish pellet producers have concerning new raw materials. To investigate the raw material situation of the Swedish pellet producers an industry survey was performed. Literature studies were also made on previous research in the subject field. Calculations of the production costs for pellets were done for the raw materials sawdust, wet sawmill chips and energy wood respectively. New raw materials are already used by the large-scale pellet producers in Sweden.

Studien grundar sig i att undersöka varför vissa elever ?nöjer sig med godkänt?. Varför väljer vissa elever att sträva mot betyget E och andra mot A i samband med teoretiska prov? Fyra elever på ett yrkesförberedande gymnasieprogram har intervjuats i denna kvalitativa studie för att förstå vilka motivationsaspekter som kan påverka elever i sina studier. Resultatet visar bland annat att elever värderar betyg olika, någon elev tvivlar på sin förmåga att kunna prestera ett A, samt att eleverna påverkas av sina klasskamraters studiemotivation.

In recent years e-commerce has experienced a big increase in usage. Internet however, cannot offer the same level of personal contact as traditional shops can.E-commerce is characterized by impersonal and standardized web shops that do not stimulate any emotional connection between the customer and the company. Without this personal contact with the customer the possibilities for the company to stimulate loyalty decreases. Loyalty however, is as important in e-commerce as it is in traditional commerce. The authors of this paper chose the following problem for the study:What marketing strategies are fortunate for e-commerce companies to use to create loyal customers?To research this subject the authors saw it fit to combine qualitative and quantitative research methods.

The project explores the possibilities of using additive manufacturing (3d-printing) to build architecture. Through a combination of theoretical research and practical experiments a building system has been developed which has the capabilities to create houses with great geometric flexibilities to a affordable price today. The construction system Perimeter is demonstrated in a pavilion situated at Norra Djurgården in Stockholm. .

The purpose of this thesis is to describe the work process and the results of our work with developing a web based auction system for students at Linköpings University. The present options open for students to sell objects within the University is limited to a billboard that doesn?t support bidding. Because of that a system was developed to offer an environment where they could present there objects and let demand set the final price level. A new function in this process is the option of alternate ways to end an auction with the intention of eliminating some of the problems that exists within the currently available web based auction systems with last second biding..

Together with Attends in Aneby a thesis of 15 ECTS (credits) have been undertaken. The assignment was to develop a new incontinence product for single use. Users of the product value comfort, flexibility, softness, comfort and a discreet product. Users are for individuals with incontinence problems that usually receive the products via prescription. The product must also have an attractive price and good quality from the purchase / originator's perspective.Currently there are two models that Attends supplies, which the project intends to develop, (Slips / Briefs and Pull On's).

This report consists of two parts, out of which the first deals with the planning and designing ofa small house in the Swedish city of Huddinge, using the weather conditions of the Swedish cityof Malmö. The house has to be in accordance with the Swedish building- and constructionregulations, as well as with the limitations in energy consumption given.The house itself has to consist of at least two bedrooms, and blueprints of the house, variousconstructional elements, ventilation, sanitation and electricity have to be drawn. Calculations ofthese aspects also have to be made, to ascertain that the different parts function as they should,and that the dimensions are sufficient.The second part is called ?Allergy free home?, and investigates how indoor climate affects us,and whether it has changed during the last few decades. It also makes an effort to see whetherthe increase of allergies and asthma is correlated with possible changes in indoor climate, andwhether technical solutions might help to handle or even decrease the issues arisen.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Syftet med den här uppsatsen är att se om hyllplacering i vertikalled är en faktor som påverkar en konsuments prisuppfattning av varan i fråga. I denna kvantitativa studie så undersöks detta fenomen på kaffeförpackningar och diskmedel. För att undersöka detta så genomfördes en enkät-undersökning på 100 personer som fick svara på bakgrundsfrågor om bland annat sina köpvanor, samt skatta pris och lyx-faktorn på 3 bilder och totalt 45 produkter. Undersökningen visade mycket men inte att hyllplaceringen hade någon betydande inverkan på prisuppfattningen..

This essay focus on three companies within the MSAB group. All companies have shown an incredible share price development since MSAB´s initial investment and ownership. The companies has been examined from the CEO´s perspective to map out similar factors of success. The aim of the study was to compare and see if the companies operate in line with Jim Collins (2001) study of how Great companies operate. The analysis show that, despite the young age of MSAB, ASSA ABLOY and AAK, they all fulfill Collins hard criterias for Great companies..

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Both the German and the Nordic power markets are seeing dramatically changed conditions due to an ongoing process of expanding the share of renewable production in the systems. For the German part this comes from heavy subsidies which have led to an explosive development in installed capacity of photovoltaic and wind based production. After the Fukushima incident it has been decided to shut down all Germanys nuclear plants. This capacity drop is however not of the same magnitude as the increase in renewables, but will impact the stability of the power system. The Nordic power system which already has a surplus of power sees an even further increase, coming mainly from construction of new nuclear plants in Finland and a general increase in wind farms.

Globalization has stimulated the free markets and has made possible for Swedish companiesto expand internationally. Some markets have been deemed attractive and companies havechosen to enter them. The decisions concerning internationalization and marketing havedetermined the success of the companies on the new market. Therefore, several elementsbecome important: the motives behind the new market entry, the local marketcharacteristics and the adaptation of the four components of the marketing mix ? product,price, place and promotion.The purpose of this thesis is to study how three Swedish companies adapt their marketingmix to the local conditions in Australia and identifies success factors in order to help othercompanies considering a market entry.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.