Energy efficiency has become a very topical issue that has been discussed throughout the European Union for preventing negative environmental impacts that have been associated with the consumption of energy. In the residential sector have mainly municipalities set strict requirements for the reduction of energy consumption while the renewable energy has been asked. Different concepts of low-energy buildings have been developed to reduce the cost of operation and maintenance in existing buildings such as in new ones.This thesis has aimed to minimize the energy cost of a large building which has had low energy consumption features originally. Energy reviews has been initiated in order to be able for showing how the house electricity could be carried out even more efficiently.The work was initiated through a literature study to clearly increase the reliability on the energy subject. Different concepts of low-energy buildings have been treated in connection with its specifications, afterward those have been compared with the obtained results.

The concentration and storage of organic chlorine and chloride were determined in soil, to a depth of 40 cm, in a coniferous forest in the Stubbetorp catchment area in south-east Sweden. Also, the spatial distribution of the two forms of chlorine was determined. Soil samples were collected at 49 of the nodes in a grid with approximately 105 m between the nodes. The analysis of spatial variability suggested that no spatial autocorrelation was present either within the variable organic chlorine or chloride. This means that no sample was more influenced by another nearby sample, as compared to other samples further away.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

Through our study we have found that there are moresimilarities than differences in leadership styles. The dominant leadership style of managers in both private and public sector is the democratic leadership style, often in combination with other styles; most notably the authoritarian leadership style. The charismatic leadership style doesn't seem to be popular in neither private nor public sector.Title:                                                                              A study of leadership styles in public and private sector Course:                                                    Bachelor Dissertation - LeadershipAuthors:                                                  Milos Kostic and Rudina ShabaniAdvisor:                                                   Ingemar WictorKeyword:                                                Leadership style, public, private, leadershipProblem formulation:          What differences and similarities in leadership styles are there between managers in private companies and managers in public companies?Purpose:                                                  Our purpose has been to find which similarities and differences there are in leadership styles between managers in private sector and managers in public sector.Theoretical framework:       After studying the theory of leadership, we found four different leadership styles relevant to our study. In the theoretical framework we discuss theories of authoritarian leadership, democratic leadership, laissez-faire leadership and charismatic leadership.

 This degree project aims at developing a concept for how to use solar energy to pump up water. The target audience is people living in areas where the functioning of the electricity and water network is absent. In these areas, the hand-powered water pump is the most common technology. The degree project's goal is to find an economically viable alternative to the time consuming hand-powered water pumps. The power comes from solar energy.

Bristly swan-neck moss (Campylopus atrovirens) is in Sweden a very rare moss that only grows on a few blocks and cliffs around Gothenburg. The species can globally only be found in areas with high precipitation. Rain fall in Gothenburg has increased with a stronger greenhouse effect. Air pollution in Gothenburg has also improved. Mosses generally benefit from these conditions and this papers hypothesis is that the population of the species has grown because of these more beneficial conditions.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

Finnhamn is a group of islands that are located in the middle north part of Stockholm?s archipelagos. On the main island Stora Jolpan there is a camp called Sommargården, which consists of eleven different buildings in various sizes. The assignment given by the Archipelago foundation (Skärgårdsstiftelsen) is to analyze if it?s benefited to replace Sommargårdens current heating system that consists of electricity radiators, with a more energy efficient heating system. This research is done with help of the literature review and a visit to Finnhamn in order to map Sommargården?s current state and its energy usage.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

This study includes a life cycle assessment, LCA, on an ecological produced cotton shirt for the company Reflective Circle, which designs ethical and ecological clothes.Initially were cotton farming and textile production studied to gather basic knowledge about the processes. Since this shirt is being ecological produced in the whole production chain, we studied what an ecological production means, but also how a conventional production works. When this was done we could start to discuss the differences and similarities between the production of the shirt and general conventional production.When the LCA was first initiated, the main focus was on the green house gas emissions from the manure at the cultivation. Thereafter the process steps such as picking, ginning, carding, spinning, weaving and sewing were being studied. The picking is done by hand, but the rest of the processes are handed by machines which consumes energy.

In the EU the amount of waste increased by 14 percent during the years 2000 to 2010. EU?s target to reduce waste generation runs parallel with the aim of increasing the efficiency and profitability aligned with energy recovery. In Sweden the energy recovery through incineration is increasing steadily, and 46 percent of the municipal solid waste (MSW) is treated by combustion. This report aims to examine the profitability of processing MSW into Refuse Derived Fuel (RDF) from an economic-, energy- and environmental perspective.

Today there is an increasing market for businesses concerning horses, and since we are already running such establishments we sort of speak already have a finger in the pie. Due tothe increasing competition and demands, new and more practical constructions have become a necessity. In doing this project I wanted to make a comparison between having a stable integrated with a manege and having both constructions kept separate. I wanted to compare different layout and make an estimate of costs to see which solution would be less expensive and better with regard to working environment. I will further also deal with different ventilation-systems andlight transmissions.

With increasing energy prices and increased focus on the environment we saw the need for companies to get control over their energy use and their emission of carbon dioxid. An analysis tool that integrates both these areas is, with our knowledge, not available on the market today. Therefore, our project became to develop such a tool.By doing this degree project we would like to clarify that energy consumption and environmental impact are integrated. The less energy consumed by today?s society the smaller the environmental impact will be.

En metod för att simulera exteriört bussljud med hjälp utav Ray Tracing har testats och utvärderats. En modell av en buss har byggts upp i ett CAD program. Dominerande ljudkällor i bussen samt materialkoefficienter har tagits fram för de material som ingår i bussen. Bussen har sedan förts in i simuleringsprogrammet Odeon, där ett antal simuleringar har utförts. Olika pass-by simulering har utförts och jämförts med mätningar.

The voluntary none-financial sustainability report has become a trend within accounting. The environmental issues used to be driven by activists only, but lately it has moved in to the general agenda in many companies. Investors are starting to put more attention to the sustainability reporting as it is considered to add value to the company. There are several standard guidelines to be used when producing a sustainability report, one example is the GRI´s Guidelines that takes the following three dimensions in consideration: economy, environment and social. This Guideline is from an international perspective considered to be of good accounting practice (Ljungdahl 2008).