In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

The Swedish parliament has decided that Sweden should increase its usage of renewable fuel sources to a level of 50% of the total energy consumption in Sweden by the year 2020. One way to reach that goal may be to increase the usage of stumps as a bio-fuel. In Sweden stump harvesting is possible on about 5-10% of the total harvested area and thus contribute with 1,3 - 2,6 TWh per year. An increase stump harvest doesn't come without its drawbacks for the environment. When harvesting stumps a tracked excavator is used to pry the stumps from the ground and then cut the stumps into smaller pieces.

The purpose of this study was to understand what the professionals experiences are of stressed youth. We did a qualitative study with interviewing three school nurses, one welfare officer and two recreation leaders. Research is saying that stress is increasing among the youth and that girls are more stressed than boys. It also says that medium is a big consequent for that (ex. Brun M.

Long transport of products is an environmental issue discussed to an increasing extent. The consumers are increasingly aware of how far our comestibles really have been transported. The increasing levels of environmental emissions are something that concerns people. The question is nevertheless delicate and many choose to ignore it. This is no longer an option.

A tendency of impaired oral health has lately been seen among children and adolescents. The consumption of soft drinks and fruit juices is rising and at the same time many children and adolescents skip breakfast and lunch at school. That in combination with a frequent snacking increases the risk of caries. The aim of this study was to examine the knowledge of caries, oral hygiene- and dietary habits and experience of tobacco among 12-year-old schoolchildren. The study was performed in 5th grade in four different schools in the North East of Skåne in cooperation with the dental health board clinic in Näsby, Kristianstad.

In order to accomplish that a construction is correctly built, it is critical to obtain a well functioning control mechanism throughout the project. The way to enable this is not by having an independent inspector constantly at your side. Today it is praxis to use check lists and have people responsible of quality to make sure that these are followed. This is where discretionary inspections play their part. These among others are documents needed to com-plete the check list.

The use and attention given to the certification system ?Miljöbyggnad? has increasedin recent years. The system is completely Swedish and was initiated in 2005 by theBygga-Bo-Dialogen. Miljöbyggnad aims to create a healthy indoor environment, reduceenergy consumption and discourage the use of hazardous chemical substances. Thegrades that can be obtained are Classified, Brons, Silver and finally Gold.The work has been to examine three different models and conclude how the designof the models affect the grades in the certification system Miljöbyggnad.

Vehicle simulators are becoming more common in vehicle industries. Company earns lot of money on simulations instead of real tests. Real tests are necessary but not made so extensively as before.In this thesis the building of an vehice simulator will be described and a comparison between three different cruise controls. The three cruise controls are PI-regulator, a regulator who regulates after positions in the terrain and a MPC-regulator. The reason for choosing this three is to see the difference between simple regulation and more complex regulation with respect to fuel consumption, travel time and complexity.The vehicle simulator is made in Matlab/Simulink, Visual Studio and Open Scene Graph.

In today?s consumption society, the image and core values of a company have become more important in order to secure the attention on the market. All entrepreneurs have to distinguish themselves in the extremely tight competition.This thesis examines how product photos can reach out to the consumers successfully. Both students have previous experiences from model shoots ? but now want to study the possibilities to sell a product without a human model.The purpose of the thesis is to examine how to convey core values by commercial product photos - how to best capture the attention of a customer.

This report deals with RFID systems and how to detect nearby tags with the Mifare standard using only a microcontroller and an antenna circuit.The aim was to investigate whether there was any possibility to continuously search for a nearby tag for a system operated with batteries without compromising   the lifespan of the battery. At this time the system would take too long time to wake up and look for a tag to give a satisfactory battery lifespan, which should be done a couple of times every second.The report has two issues, namely:Is it possible to direct the microprocessor to detect and identify a nearby tag after the Mifare standard?What hardware is required for this to be possible?As the research method to provide answers to the above questions an action research was used. This approach has meant that the group worked on information retrieval, examined existing solutions, tested their own solutions and documented the results.The group examined an existing solution that can search for nearby tags with minimal energy consumption. An antenna circuit was built that was connected to the processor.

The purpose of this study was to examine two relatively similar product industries, of which one is successful in its commercialization and the other one is not successful. The two industries observed in this paper are both Swedish industries, and both of them produce slow moving consumer goods for the luxury consumer. The successful industry is represented by the Swedish fashion industry, more precisely The Swedish Fashion Wonder (TSFW) - a term describing the success of a specific coalition of fashion designers from Sweden. The unsuccessful industry is represented by the luxury watch industry in Sweden (LWIS). The method used to examine the two industries' inequalities is based on a qualitative study, consisting of in-depth interviews with industry expertise from both of the industries.

Purpose                           The purpose of this study is to create an understanding of how e-commerce companies use loyalty programs in order to retain their customers and to increase its consumption, and compare this with customer perceptions of loyalty and learn what makes them loyal. Theoretical framework      The theoretical framework starts with definitions of loyalty and customer loyalty. Further, it discusses what a loyalty program is, how rewards today and in the future affect the consumers, and other promotion offers that are commonly used. The theory also discusses how previous points work in e-commerce. Method                                                    To take advantage of the companies? point of view and at the same the customers? perspective, the survey is based on a combination of a qualitative and quantitative study. In the study, two companies in the fashion industry were interviewed and 391 respondents participated. Empirical study                 In the empirical study the interviews with the two e-commerce companies are first presented, which revolves around their use of loyalty program.

The purpose of this essay was to study some selected magazine articles by examining how the concept of child poverty is produced in the public debate, and to see if the definition of the term has changed over time. The theoretical approach on which this study is based has been used as a tool to provide better understanding on the subject. Furthermore, theories of consumer society, the "collateral damage" and the theory of welfare regimes have been used. In the previous research presented in the paper focuses on linking children and families living in precarious economic conditions, consumer standards and welfare systems that characterize society.This study has a qualitative approach as it attempts to capture and increase understanding of how the concept of child poverty can be understood from a Swedish context. The study is based on newspaper articles that are studied using a structural text analysis.

As a result of an increased consumption, waste volumes has grown steadily throughout the 1900s, and this puts great demands on an efficient and ecological sustainable waste management on both local and national level. In order to evaluate collection and disposal of household waste, a large number of Sweden´s municipalities are using waste analyses. The overall aim of this study has been to summarize and assess results from waste analyses executed in Härjedalen´s municipality during the years 2007-2011.The evaluation has given information about the household waste´s composition, quantity and change in time. The report´s objective has been to create a basis which the municipality can use in planning of future information efforts and other measures, and give some proposals on how these can be designed and targeted. Therefore, the report also highlights research on motivations factors that affects environmentally conscious behavior such as recycling, and how different instruments like information can be used to promote this.

The development within the textile industry is always ongoing with development of new andbetter textiles, which often mean the use of non-natural materials like polyester. This doesn?t lineup with the work shared around the world against an improved environment, so the idea came touse a form of linen fibers instead of polyester as the reinforcing material together with cotton.The idea was to use flax, linen of low quality, which is seen as a waste product and garbage inthe production of high quality linen and flax seed oil. This flax of low quality needs to beseparated before it can be used in cotton spinning machines. Fireball 2 is just that, a process toseparate flax fibers through the treatment of a technique called electrohydraulic discharge.The thesis works goal is to evaluate the Fireball 2 process ability to separate flax fiber.