This thesis has been made on behalf of Forsmarks Kraftgrupp AB and is the final part of the education of Bachelor of Engineering in ? Innovation, production and logistics atMälardalens Högskola.Forsmark nuclear power plant is located in Östhammars municipality at the coast of Uppland. The three nuclear reactors in Forsmark together produces approximately one-sixth of Sweden?s Electricity consumption each year.The background of this study is that a large number of requests come to the purchasing department with incomplete information. Usually it is in the description of what is to be acquired as the information is incomplete, but also in knowing when Quality Control-functions (QC) is supposed to be used.The aim of this work is to describe and analyse the material acquisition process.

Today many companies and municipalities requires that their suppliers should have an environmental management system to work by. This might be one of the reasons to the increasing number of companies that today are implementing environmental management systems. Care of Haus is one of the companies that thinks that the benefits are bigger than the disadvantages, when it comes to environmental management systems, therefore they have made the choice to work with ISO 14001.The ISO 14001 standard is deified on the PDCA- cycle. PDCA stands for Plan, do check and act. Care of Haus choose to work with the ISO 14001 standard since it is a well-known standard for the companies that?s Care of Haus collaborates with and it is also well-known within their clienteleWithin this report an environmental investigation has been made.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

The effects of the deregulation of the electricity market 1996 in Sweden on short-term hydropower regulation are unknown. This report investigates patterns in subdaily regulation in the Ångerman River Basin during the period 1993-2011. Differences in subdaily flows and zero flow events between the periods 1993-1995 and 1996-2011 were studied by analyzing hourly data from 8 regulated and 8 unregulated locations with four subdaily flow variation indices. No correlations between the market deregulation and the regulation intensity in the Ångerman River basin were detected. The number of days natural ranges of variability were exceeded and the magnitude of subdaily variation were significantly higher at regulated locations.

Today the individual ventilated cage system (IVC-system) is a commonly used housing system for mice in research facilities. IVC systems have HEPA- filters and are designed to control both supply and exhausted air at cage level, as well as temperature and relative humidity in the cages. This creates an optimal environment for the mouse and at the same time a protection against the risk of cross-infection between cages and the outside environment. The aim of this study was to evaluate the health and welfare of breeding females and pups of two different strains of laboratory mice (NMRI nude mice and C57BL/6N) in three different kinds of IVC-systems; Arrowmight, Allentown and Tecniplast. The NMRI nude (Nu) females gave birth to 18 litters in Allentown, 16 litters in Arrowmight and 15 litters in Tecniplast.

A possible way to reduce pollution and slow down the process of global warming is to increase the usage of renewable energy sources. One of these renewable energy sources is solar power. With the aid of solar panels and solar cells the energy from the sun can be transformed into both heating and electricity. The requirement to use the sun in this fashion is a suitable surface, for example a big roof, an angle between 40-60 degrees and that the surface should be exposed to the south. Almost every farm meets these requirements.

I want to find the meaning of food ?potato in today?s society. How about marketing and how does potato consumes? What can be done to achieve better competitiveness towards other products now and in the future? I will build this project on a statistic ground ?now and then? as well as a study to people outside various food- markets. The consumers answers will state my foundation in this project.

This master thesis aims to investigate and quantify the potential associated with increasing the usage of edible by-products as food for human consumption on the Swedish market. The main emphasis is on the Swedish production of offal and the obstacles that currently inhibit greater usage of these products as foods.The results indicate that the Swedish market for offal is limited. Only a small amount of the edible by-products that are produced in Sweden every year are consumed as foods and a considerable amount seem to be downgraded into animal feed or thrown away. The utilization of these products is restricted by economical, technical, legal, and cultural factors that all need to be taken into consideration. On the whole, large-scale slaughter plants seem to be more inclined to utilize these products effectively, as the profit from doing so increases proportionately to the produced volumes.

In Uppsala CHP Plant, there are six pressure reducing valves to reduce the pressure from 15 to 3 bars, before six absorption heat pumps. During the process the energy is conserved but losses occur in form of exergy. The aim of this thesis is to reduce the losses of exergy. This can be done by letting turbines replace the pressure reducing valves.In this thesis an investigation has been done of the conditions today, the conditions after the change from pressure reducing valves to turbines and a comparison of three different types of turbine solutions. The three examined solutions are one turbine, several helical screw expanders and several small turbines in parallel with asynchronous generators.The six absorption heat pumps have been divided into two groups; one group of four and one group of two absorption heat pumps.

The aim of this study was to investigate in what way content marketing can be understood through podcasts as an alternative marketing tool. The material which the study was based on is Ölpodden, a podcast initiated by Carlsberg Sweden. The study intended to shed light on the interdiscursivity that emerges when brands are communicated through podcasts. Another aim was to understand how relationships and identities are constructed through the podcast by examining its intended audience. In order to achieve this a critical discourse analysis was used as both underlining theory and comprehensive method.

The purpose of this thesis is to investigate peoples experience when listening at audio books. During recent years the use of audio books has increased significantly. With that knowledge and the fact that this is an almost unexplored area within Library- and Information science our interest grew even stronger. The thesis is based on two different theories. To be able to place audio books in a context we have applied a media- consumption perspective by asking questions like when, where and how the media-consumption takes place.

Research on Stone Age hunters and gatherers in Norrland has been lively since the 1960s. Central to this research are questions about the organization of society, sedentariness, continuity and resource management. One central part of life in the taiga is the need for fire and fuel. This aspect has been little discussed in conjunction with the mentioned research questions. My goal is to show that the matter of fire and fuel is an important one that needs to be taken in to consideration when discussing Stone Age Norrland and hunter/gatherers.

The world is facing huge challenges to overcome the climate crisis. A contributing actor to the environmental footprints are the textile industry and their production processes, which highlights the importance to act. The purpose of this study is therefore to investigate how a middle size company's purchase- and design department work to contribute to sustainable fashion and sustainable consumption. As well as to examine the challenges and possibilities that the fashion company faces in its sustainability work. The qualitative study has been prepared and is based on 15 interviews with employees in the purchase- and design department.