This report is the result of a thesis carried out at the Department of Innovation, Design and Technology (IDT), at Mälardalen University on behalf of ABB AB Machines.The year was 1988 when ASEA and Brown Boveri formed a joint venture under the name ABB (Asea Brown Boveri).We perform our thesis at the division Discrete Automation and Motion where they primarily develops, manufactures and sells synchronous and asynchronous AC motors and generators.The main purpose of this thesis was initially to write a general packaging instruction, but the priority changed to develop more specific packaging instructions for Rotors, Stator gables, Bearing support and Outer Cover (plates) instead.The work started off to deal with a problem about that the staff had to start its work to grind away rust on the stator gables due to those stored outdoors. The result was mainly an investment in a new gable rack so that the material can be stored inside, as well as a packing instruction as it was originally intended.The problem on the bearing supports were that the staff thought it was demanding and difficult to clean them from the rustproofing they were greased in. If it is not possible to remove all rust protection it can cause the paint to not attach properly. After having compared with similar articles a test were done to order a pair of bearing supports without corrosion inhibitor, which gave good results. This initiative also set in motion a process to do the same for more different items.For special pallet, a survey were made of the process with two different VSM and a calculation of how much ABB would earn at ordering more special pallets than getting the material delivered on the A-pallets.

Trådgnistning (på engelska Wire Electrical Discharge Machining eller WEDM) är en termiskbearbetningsprocess för att med en trådelektrod skära i elektriskt ledande material. Metoden har teoretiskt sett många fördelar och relativt få nackdelar. Intervjuer i studien visar att trots detta så undviker flera industriföretag om möjligt denna process. Syftet med studien är att utifrån de teoretiska fördelarna som anges i litteraturen undersöka vad företag i Sverige anser vara de mest relevanta praktiska fördelarna med trådgnistning som bearbetningsprocess. En internetbaserad enkät har skickats ut och besvarats av 20 industriföretag runtom i Sverige.

One step towards a more sustainable energy system is to create a more flexible electrical grid, where increased demand response among electricity consumers can play an important role. A distribution grid owner can encourage their customers to use electricity more evenly distributed during the day by introducing different types of grid fees such as time-differentiated power tariffs. In this master thesis, the theoretical economic impact of a flattened load profile for a distribution grid owner is investigated. Different factors that impact the distribution grid owner?s economy are identified and two are chosen to be quantified; losses in the grid and the fee to the feeding grid.

AbstractThe future of ethanol is depending on good solutions for the production. ENA energy power plant produces electrical power and district heating by heating biofuel. By building an integrated bioenergy plant surplus steam could be used to produce ethanol as fuel to vehicle.This would mean that ethanol is produced renewable energy and the energy for the process derives from the surplus of power.  ENA energy, MDH (the University of Mälardalen) and the energy authority has initiated a research project were different bioenergy combinations integrate with existing power plant.  As a part of the project which size an integrated factory should be to gain the best efficiency for the plant was investigated. Consideration will be taken to the cost of the production in order to be competitive to the price of imported ethanol.  Etanolens framtid vilar på bra lösningar för framställning.  I ENA energi kraftverk i Enköping produceras el och fjärrvärme genom eldning av biobränsle.  Genom att bygga ett integrerat bioenergikraftverk där skulle man kunna använda överskottsånga till att framställa etanol som fordonsbränsle.

Scania utvecklar och tillverkar lastbilar, bussar, industri- och marinmotorer. Största delen av Scania Sverige ligger i Södertälje, där även den mesta utvecklingen av produkterna sker. Företaget är verksamt i ca 100 länder och har 34 000 anställda. Forskning och utveckling består av ca 2 400 anställda. [1]Scania Motormontering Södertälje tillverkar motorer för Scanias europeiska produktion av lastbilar och bussar.

In recent years the construction industry has been exposed to increased time pressure which has resulted in a higher amount of wastage. Today 35 % of all construction projects in Sweden is "wasted". Time pressure has risen due to increased competition on the market, with more actors entering the construction business, therefore profit margins decreased which has led to a more pressing need for decreasing the amount of wastage.Bravida is Scandinavia's largest supplier of installations and provides specialist services in electrical installations (heating and sanitation), and ventilation. Mahdi Bawaqneh's task was to investigate where, how and why wastage occurs in the company's projects and how to prevent such wastage. The thesis covers the subjects of lean production, communication in projects and planning of projects.

The present study concerns a concept development of a product idea that Bengt Magnuson, associate professor, had when a heavy storm caused a widespread power failure of long duration. With a basic power-producing unit one should be able to get through a power loss. The product could also be useful for other tasks if different modules are connected, e g grass mower or snow-blower.According to the product idea the basic unit will be able to produce electric power enough for a fridge, freezer, TV, and a few electric lamps. Normally the basic unit can be used e g as a mower, when such a module is attached. An increased number of tasks would make the contraption useful and tempting for those who do not own an electrical power set in reserve.

I mitten av 90-talet vidareutvecklade den amerikanska bilindustrin, genom Chrysler, Ford och General Motors, ISO 9000 och resultatet blev kvalitetssystemet QS-9000. Denna kvalitetsstandard utvecklades för att biltillverkarna skulle kunna ställa gemensamma och höga krav på sina leverantörers kvalitetssystem och förbättringsarbete. Eftersom SSAB Tunnplåt tillverkar plåt som används inom bilindustrin är de certifierade enligt QS-9000. QS-9000 standarden ställer krav på det certifierade företaget att det skall arbeta med duglighet och att de vid förfrågan skall kunna påvisa att deras processer är dugliga. Den ställer även krav på att företaget regelbundet skall använda duglighetsindex.

A Biogas plant in SLU?s (Swedish University of Agricultural Sciences) management sustains to behave in con-nection with the new animal stables at Lövsta. There will primarily manure from stables that rot to biogas. The biogas plant will also have the capacity that rot others substrates that can arise in the farm operation. The aim with the biogas plant is to produce non fossil electrical and gas heat for own customs, to reduce smell impact from stables and to make possible different types of research investments within the area.This study has implemented multiple cases study of different investment scenarios.

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

This paper aims to explore the phenomenon urban wind energy, its visual effect on built environment and the factors that affect the opinion towards new elements in the city. A place study of the city Gävle serves as a complement to the theoretical part of the paper. The theoretical discussion opens with an account for the technical and economical conditions of urban wind energy. It presents the technical basics, different types of turbines and a discussion occurring wind related techniques in built environment. Today, the knowledge of how the wind moves and acts in the rural landscape is quite good.

AbstractAim of the study: Aim of the study was to investigate whether there were any connections in time between different parts of care in patients with cardiac arrest and hypothermia treatment and cognitive and physical function six months after cardiac arrest and to investigate neurological outcome related to primary registered cardiac arrest rhythm after six months and if there were any changes in cognitive and physical functions as well as self-related health between discharge from hospital and six months after cardiac arrest.Method: The study included 39 patients admitted to three Swedish hospitals between 2008-2011. Cognitive and physical function was evaluated with Cerebral Performance Cathegory, CPC completed with Mini Mental State Examination, MMSE for cognitive function and Bartels Index, BI for physical function and Euroqol-VAS for evaluating the self-related health.Result:  A significant connection was shown between time to start hypothermia treatment and BI, patients with longer time showed improved physical function after six months.Majority of the participants (66,7 %) had Ventricular fibrillation/Ventricular tachycardia, VF /VT, as primary registered cardiac arrest rhythm and in this group CPC and BI was significant better compared with the asystole /Pulsless Electrical Aktivity, PEA group.CPC, MMSE, BI and Euroqol-VAS were all improved over time.Conclusion: Participants with VF /VT as primary registered cardias arrest rhythm had significant better cognitive and physical function 6 months after hypothermia-treated cardiac arrest compared with participants with asystole/PEA as primary registered rhythm. This shows the importance of access to defibrillators in public places in the society and in hospitals and optimal education of lay people and medical staff. Cognitive and physical function and self-rated health improves over time, which might be a very important reason to convey patients, relatives and medical staff to continue cognitive and physical rehabilitation. Keywords: Cardiac arrest, hypothermia, cognitive and physical function, wellbeeing.

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.

AbstractAim of the study: Aim of the study was to investigate whether there were any connections in time between different parts of care in patients with cardiac arrest and hypothermia treatment and cognitive and physical function six months after cardiac arrest and to investigate neurological outcome related to primary registered cardiac arrest rhythm after six months and if there were any changes in cognitive and physical functions as well as self-related health between discharge from hospital and six months after cardiac arrest.Method: The study included 39 patients admitted to three Swedish hospitals between 2008-2011. Cognitive and physical function was evaluated with Cerebral Performance Cathegory, CPC completed with Mini Mental State Examination, MMSE for cognitive function and Bartels Index, BI for physical function and Euroqol-VAS for evaluating the self-related health.Result:  A significant connection was shown between time to start hypothermia treatment and BI, patients with longer time showed improved physical function after six months.Majority of the participants (66,7 %) had Ventricular fibrillation/Ventricular tachycardia, VF /VT, as primary registered cardiac arrest rhythm and in this group CPC and BI was significant better compared with the asystole /Pulsless Electrical Aktivity, PEA group.CPC, MMSE, BI and Euroqol-VAS were all improved over time.Conclusion: Participants with VF /VT as primary registered cardias arrest rhythm had significant better cognitive and physical function 6 months after hypothermia-treated cardiac arrest compared with participants with asystole/PEA as primary registered rhythm. This shows the importance of access to defibrillators in public places in the society and in hospitals and optimal education of lay people and medical staff. Cognitive and physical function and self-rated health improves over time, which might be a very important reason to convey patients, relatives and medical staff to continue cognitive and physical rehabilitation. Keywords: Cardiac arrest, hypothermia, cognitive and physical function, wellbeeing.