The Motor Group of the European Council was commissioned in the autumn of 1997 to prepare a proposal for a new European Bus and Coach Directive. In the beginning, most of the Member States did not have the accessibility requirements as their main concern; still a smaller network with actors from the National delegations from Britain, Germany and Sweden would influence the other National delegations in the Council group to finally agree to retain the requirement of accessibility of the Directive. Within the EU decision process, the European Disability movement acted as a strong player during the whole negotiation process using the proposal to a new Bus and Coach Directive as a tool to influence key actors to go towards a Directive with a strong approach for accessibility.Policy Transfer and Policy Transfer Network are used as analytical tools to understand and structure the transfer of the question of accessibility during the negotiation process. Actors understanding how the bureaucratic process works within the EU decision system have a chance to contributing for the changes in the directions they wishes for within a range of policy areas. The principal aim of the Directive was to guarantee the safety of passengers and to provide technical prescription in particular to wheelchair users.

When the costs for a company increase it is normal to look for alternatives to lower thesecosts. One of the expenditure that farmers have is energy costs. The price for the energy mayvary because of the free market. To look at the possibilities for a farmer to invest in sunpower, to make the company less sensitive for the changes on the electrical market, isinteresting. The biggest part of the electricity that is produced in Sweden comes from a fewcompanies on the market.

This master thesis covers the seasonal planning of a small scale hydropower system. The system in this study is owned and operated by Mälarenergi Vattenkraft AB. The total system consists of 4 different main rivers with 24 hydropower stations and several dams. The total installed power in the system is 43.75 MW. Most of the hydropower stations are regarded as small scale hydropower stations and thus entitled to green certificates.In this report the issue of planning is formulated as an optimization problem.

Huvudsyftet med detta examensarbete var att ta fram ett regelverk för hur Hägglunds Drives AB kan effektivisera framtagningen av kundanpassade axeladaptrar för montering mellan utgående motoraxel till kundaxel. Ett beräkningsprogram skapades i Excel som guidar konstruktören genom skapandandet av en adapter. Till beräkningsprogrammet kopplades en parametriserad CAD modell av en adapter. På så sätt går det med en knapptryckning i beräkningsprogrammet skapa en CAD modell med den av beräkningsprogrammet föreslagna utformningen med rätt toleranser och mått. Möjligheten finns även att automatiskt generera ett ritningsunderlag på en 2D ritning.

Neurography is the most objective and reliable measure of the peripheral nerve function, and it is used to diagnose both local and generalized neuropathies. Neurography can measure both motor and sensory nerve functions. The principle for sensory neurgraphy is to stimulate over the nerve and record proximal or distal from the stimulated electrode.At the Department of Clinical Neurophysiology, University Hospital Uppsala, a problem has been identified, in that young adult patients tend to show unexpected abnormal neurography values in relation to the expected, indicated by the reference limits, without clinical correlates. This concerns foremost the sensory amplitudes in median and ulnar nerves. The hypothesis is that the requirement of young adults? amplitudes is too high.

Smallholder farmers in Uganda suffer from declining productivity. With a rapidly increasing population, marginal land is taken into production and the current land management leads to loss in soil fertility and escalation in soil erosion. There are studies indicating that the use of agroforestry increases soil organic carbon (SOC) compared to systems without trees. Soils which are high in carbon have many advantages, for example better water holding capacity, which can reduce stress on crops during drought. The aim of this study was to determine the effect agroforestry has on SOC concentration in small-holder farming systems in Uganda. The intended system to study was farms practicing agroforestry methods or not in intercropped plantain (cooking banana) fields.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

Leisure boats of today have a lot of electronics that needs battery power to work. In additionto that electric propulsion systems have gotten more popular lately, which further increasesthe demand for high battery capacity. The batteries used are mostly lead-acid batteries and toget the most out of the batteries it is important to treat them right. To optimize the electricsystem it is important to have knowledge of how the batteries and the electric motor are usedand which factors affect e.g. efficiency and recharging.A new electric drive that can replace old diesel engines is being developed and needs testingand evaluation.

This thesis is a product development project that was performed at Alfa Laval Tumba AB. In the past Alfa Laval have manufactured gas separators for engines where gas flows were cleaned from oil. A new business area for this kind of technology has shown to be the manufacturing industry where oil mist has to be separated from the vented air. Therefore a new and bigger design is needed to be able to handle the greater gas flows. A product like that would be a strong competitor on the market when the maintenance would be low in comparison to today?s equipment.During the project several concept suggestions were developed using customer interviews and research as input.

Syftet med examensarbetet är att göra en trådlös version av det elektriska lås som tillverkas av Electec System AB.För att göra ett trådlöst elektriskt lås måste ett batteri monteras i låset. Batteriet måste hållas uppladdat hela tiden för att kunna driva motorn och ge strömförsörjning till elektroniken i låset. Alla signaler mellan låset och styrenheten ska dessutom överföras trådlöst istället för med kabel. Signalerna måste kodas innan sändning så att ingen obehörig kan läsa signalen och sedan öppna dörren.Det svåraste i ett trådlöst elektriskt lås är att överföra effekt från dörrkarmen till låset eftersom utrymmet är begränsat och avståndet mellan låsblecket i karmen och låset i dörren kan uppgå till 10 mm. För att överföra effekt från dörrkarmen till låset konstruerades en transformator.

Schur AB är ett företag i Eksjö som erbjuder sina kunder lösningar inom post- och tidningshantering. Bland dessa lösningar ingår ett transportsystem kallat Gripper TGG 3200 vilket transporterar tidningar från exempelvis pressen till olika enheter i packsalen. Transportsystemet drivs av ett antal asynkronmotorer, antalet motorer variera med avseende på hur lång transportsträckan är. Då drivstationer och motorer är de dyraste komponenterna i transportsystemet vill man minimera antalet av dessaSystemet är uppbyggt av aluminiumprofiler som gör att det kan skräddarsys efter kundens behov. I profilerna rullar enheterna som transporterar tidningen i en sammanlänkad kedja.

Det här examensarbetet går ut på att utreda vilken påverkan oljeval och inkörningsmetod har på tätning mellan kolvring och cylindervägg i en fyrtaktsmotor. Arbetet har utförts på en motorcykel av märket Honda och modellen heter CBR 954 RR årsmodell 2003. Det diskuteras dagligen i tidningar, på internet och i garage runt om i världen om vilken typ av inkörning som är effektivast för att få en motor att gå bra och hålla länge. Vissa bil- och mctillverkare har helt tagit bort sina inkörningsrekommendationer medan andra fortfarande har kvar rekommendationen att man ska köra lugnt och på låga varvtal under ett visst antal mil. Eftersom att inkörningen påverkar väldigt många parametrar så finns inte möjlighet att testa hur olika oljeval och inkörningsmetoder påverkar alla dessa parametrar.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

I denna rapport beskrivs en utvecklad utbildningssimulator o?ver spa?rfordon och dess del- komponenter pa? ja?rnva?gen. Simulatorn a?r en ha?rdvarubaserad prototyp o?ver ett do?rrsystem pa? spa?rfordon. Prototypen ska anva?ndas av systemspecialister och tekniker inom ja?rnva?gs- branschen.

Trådgnistning (på engelska Wire Electrical Discharge Machining eller WEDM) är en termiskbearbetningsprocess för att med en trådelektrod skära i elektriskt ledande material. Metoden har teoretiskt sett många fördelar och relativt få nackdelar. Intervjuer i studien visar att trots detta så undviker flera industriföretag om möjligt denna process. Syftet med studien är att utifrån de teoretiska fördelarna som anges i litteraturen undersöka vad företag i Sverige anser vara de mest relevanta praktiska fördelarna med trådgnistning som bearbetningsprocess. En internetbaserad enkät har skickats ut och besvarats av 20 industriföretag runtom i Sverige.