Rapid Granulator is one of the world's largest producers of granulators, which is a kind of grinderwho grinds discarded plastics to granules which later can be reused when pressure molding plastics.The company wanted help in developing a new, or alternatively extending their previous,measurement equipment. The old equipment was hard to use, required changes in the code fordifferent measurement scenarios and had a limited array of measuring quantities. Rapid had an ideaof a similar concept only with a greater number of input ports, better range of applicable sensors andan advanced yet easy to use interface. The system is supposed to be placed at Rapid's test departmentwhere it will be used as a tool for finding faults and provide data which can be used for furtherdevelopment of the granulators.The project's members accepted the task and immediately began searching for suitable componentsfor the system. After the search was completed a list of costs, limitations, sensors, I/O's anddevelopment environment was presented to Rapid's staff.

AbstractAim of the study: Aim of the study was to investigate whether there were any connections in time between different parts of care in patients with cardiac arrest and hypothermia treatment and cognitive and physical function six months after cardiac arrest and to investigate neurological outcome related to primary registered cardiac arrest rhythm after six months and if there were any changes in cognitive and physical functions as well as self-related health between discharge from hospital and six months after cardiac arrest.Method: The study included 39 patients admitted to three Swedish hospitals between 2008-2011. Cognitive and physical function was evaluated with Cerebral Performance Cathegory, CPC completed with Mini Mental State Examination, MMSE for cognitive function and Bartels Index, BI for physical function and Euroqol-VAS for evaluating the self-related health.Result:  A significant connection was shown between time to start hypothermia treatment and BI, patients with longer time showed improved physical function after six months.Majority of the participants (66,7 %) had Ventricular fibrillation/Ventricular tachycardia, VF /VT, as primary registered cardiac arrest rhythm and in this group CPC and BI was significant better compared with the asystole /Pulsless Electrical Aktivity, PEA group.CPC, MMSE, BI and Euroqol-VAS were all improved over time.Conclusion: Participants with VF /VT as primary registered cardias arrest rhythm had significant better cognitive and physical function 6 months after hypothermia-treated cardiac arrest compared with participants with asystole/PEA as primary registered rhythm. This shows the importance of access to defibrillators in public places in the society and in hospitals and optimal education of lay people and medical staff. Cognitive and physical function and self-rated health improves over time, which might be a very important reason to convey patients, relatives and medical staff to continue cognitive and physical rehabilitation. Keywords: Cardiac arrest, hypothermia, cognitive and physical function, wellbeeing.

Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.

AbstractAim of the study: Aim of the study was to investigate whether there were any connections in time between different parts of care in patients with cardiac arrest and hypothermia treatment and cognitive and physical function six months after cardiac arrest and to investigate neurological outcome related to primary registered cardiac arrest rhythm after six months and if there were any changes in cognitive and physical functions as well as self-related health between discharge from hospital and six months after cardiac arrest.Method: The study included 39 patients admitted to three Swedish hospitals between 2008-2011. Cognitive and physical function was evaluated with Cerebral Performance Cathegory, CPC completed with Mini Mental State Examination, MMSE for cognitive function and Bartels Index, BI for physical function and Euroqol-VAS for evaluating the self-related health.Result:  A significant connection was shown between time to start hypothermia treatment and BI, patients with longer time showed improved physical function after six months.Majority of the participants (66,7 %) had Ventricular fibrillation/Ventricular tachycardia, VF /VT, as primary registered cardiac arrest rhythm and in this group CPC and BI was significant better compared with the asystole /Pulsless Electrical Aktivity, PEA group.CPC, MMSE, BI and Euroqol-VAS were all improved over time.Conclusion: Participants with VF /VT as primary registered cardias arrest rhythm had significant better cognitive and physical function 6 months after hypothermia-treated cardiac arrest compared with participants with asystole/PEA as primary registered rhythm. This shows the importance of access to defibrillators in public places in the society and in hospitals and optimal education of lay people and medical staff. Cognitive and physical function and self-rated health improves over time, which might be a very important reason to convey patients, relatives and medical staff to continue cognitive and physical rehabilitation. Keywords: Cardiac arrest, hypothermia, cognitive and physical function, wellbeeing.

SVT is Sweden?s largest TV-network and broadcasts more then 22 000 hours of TV each year. SVT is a public service company where the basic idea is to reflect the world from different perspectives and news is very important for providing neutral and versatile information in a variety of areas. An important part of the flow of information is to continuously receive reports from all corners of the world around the clock. This places very high demands on the technology used and it is important that it function and develops to meet current and future growing needs.

To meet the growing amount of waste from electronic and electrical equipment (WEEE) EU developed, year 2002, a directive (2002/96/EG) with the objective to govern the management and reduce the amount of WEEE. The directive is based on producer responsibility which makes the producer responsible for collection and dispose of WEEE. In 2012 a new revised directive (2012/19/EU), with tougher collection targets, was developed. Both the old and the new directive states that the approach to tackle WEEE should be prioritized in order of prevention, reuse and then recycling. Hitherto the amounts of WEEE has increased every year, making it relevant to examine which type of preventive measures the directive contains and how effective they are.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

This master thesis has been performed at Sectra Communications AB in Linköping where they manufacture electronic encryption devices. In cryptology it is essential that an eavesdropper cannot find the plain text. To assure that a system is safe, all devices are thoroughly examined so that they don?t emit any secret information, so called Compromising Emanations (CE). This is done by comparing the secret signal with measured signals on the screen of an oscilloscope, a process that is very time consuming and furthermore, the risk of missing compromising emanations is high.

Examensarbetet utgörs av en sammanfattning av tre genomförda nybyggnadsprojekt. Foton, ritningar och skisser visar hur arkitektoniska koncept omsatts från vision till verklighet. Gemensamt för projekten är att målbilden varit inriktad på nytta, identitet och mervärde. Kanal 5 i Stockholm är en mindre glasbyggnad som blivit en symbol för omvandlingen av ett helt innerstadskvarter, där verksamheterna ändrats från industri och hantverk till arbetsplats för idéprojekt och mediaproduktion. Byggnaden fungerar som huvudentré till äldre lokaler som renoverats. Stadsutveckling.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Rapporten beskriver förslag på framtidens ?Rear Seat Entertainment? som baseras på användning av pekskärm, istället för de DVD-baserade TV-skärmar som finns i t ex Volvo S80 i dagsläget. Projektet utfördes som ett examensarbete inom integrerad produktutveckling vid Högskolan i Skövde. Syftet med arbetet var att hitta lösningar som möjliggör användning av ?touchteknik? som kräver armavstånd till displayen.

Grubbe Ventilation AB is a sheet metal and ventilation company who provides design, installation, service, and repair of ventilation. The company is expanding their business by building a new facility in Umeå, Västerbotten. The property is designed to be used for both office and industrial work.Grubbe Ventelation AB has not yet decided upon wish system which is to be established to provide the building with heating and cooling. The consulting firm Umeå Projekt Team has therefore been asked to investigate the possibilities to invest in geothermal- heating and cooling.If the investigation of a geothermal heating- and cooling system would provide favorable results it would be a very appropriate alternative that provides energy at low costs and are an environmentally friendly option as the energy comes from stored solar energy in the ground is provided by stored solar energy in the ground.The facility ´s heating and cooling consumptions are calculated in the program BV2 and the result indicate a heating demand of 185 000 kWh per year due to thermal transmittance, transmission losses, heating of warm water and a cooling requirement of 5500 kWh.Three different systems of geothermal heating and cooling were tested in the computer program Energy Earth Design. The results show no difference in the dimensioning of the drill hole if merely heating were to be used or both heating and cooling were to be established.

SammanfattningDetta examensarbete är ett produktutvecklingsprojekt som har utförts på beställning av St. Jude Medical. Syftet med projektet har varit att undersöka och förbättra den klämprocess som skapar ett klämförband på pacemakerelektroder. Processen sammanfogar tre komponenter genom klämning och detta sker idag med en pneumatisk klämtång. Denna process är mycket operatörsberoende och ett antal förbättringsområden finns.Projektet har fokuserat på att nå upp till de listade kraven som, i samarbete med St Jude Medical, tagits fram för att förbättra den befintliga processen.

The product structure of the fuel tank installation is one of the most complex product areas at Scania. Caused by the number of parameters, which affect the fuel tank installation, a product structure is created which is very difficult to handle. Knowledge exist that the structure in a nearby future will be considerable more complex. The purpose of the study has been to understand in why this complexity exist and find ways to break the trend of a growing product structure. The goal was to achieve a more standardized fuel tank installation.A theoretical study was performed in order to bring knowledge in relevant areas both in general theory but also in documentation at Scania.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.