Osseointegrated titanium implants have become a commonly used method in edentulous jaws and today there are success rates in the magnitude of 82 % in the lower jaw and 98 % in the upper. During first year after implantation a fully normal marginal bone loss of 1-2 mm occurs. If the bone loss continues there is a risk of implant failure. High tensions in bone and inflammation caused by bacteria are possible reasons for this problem. It has been shown that a leakage of bacterias occurs between the parts of the implant and there are theories that this has effects on the marginal bone loss. The aim of this thesis has been to increase the knowledge about microbial leakage with help of in vitro tests and virtual simulations.

Fastighetsregistret (The Cadastre) is a large and important information sourcesupplied by Lantmäteriet (the Swedish mapping, cadastral and land registrationauthority). Fastighetsregistret provides geographical information about the 3.2 millionestates in use in Sweden. Fastighetsregistret has a large number of users who trustthat the provided data is reliable, but experience shows that the data can have varyingquality. As a user it is not always possible to access more detailed information inorder to assess to what extent the data in Fastighetsregistret is reliable.The purpose of this master's thesis is to investigate the possibilities of a system with agraphical user interface that present, classify and visualize the quality of the data inFastighetsregistret. The defined user group for this suggestion is internal users atLantmäteriet who have a good understanding of Fastighetsregistret.

This master?s thesis was performed at PartnerTech AB in Åtvidaberg. It addresses the problem of managing test results obtained from testing electronics manufactured by PartnerTech. PartnerTech has developed a test system, called Tor, which performs tests on manufactured boards and stores the test results in files. The Tor system consists of both hardware and software part, where the software runs on an ordinary PC with MS DOS/Windows 2000.

AbstractThis study examines the technologies appropriate in developing back-and solutions for search-driven user interfaces of e-commerce sites. The study is based on existing research in search-driven user interfaces of e-commerce sites from a design point of view, but instead the focus of this study lies within a back-end perspective. This choice of focus is a result of the gap that was encountered within research and other literature when it comes to general advice in how e-commerce sites best should build back-end solutions to support search driven user interfaces. The technologies that have been examined and compared are traditional relational databse management systems (RDMS) and the newer so called No-SQL database management systems, and also traditional search engines and the newer variant s of search engines. The study concludes that in some cases it is appropriate to combine traditional and newer technologies when it comes to databases, while the comparison of search engines indicates that there are some newer search en gines that have the ability to meet more of the needs that can be identified on the back-end solutions.Primary data consists of interviews made ?face to face? with experts on the subject and questionnaires addressed to selected e-commerce companies via e-mail.

The goal of this paper is to find out how solar cells can improve energy efficiency on-board M/S Sydfart. The paper is based on a number of energy measurements on board the M/S Sydfart. The solar surface is calculated by measuring the available space for installing solar panels. Global radiation data is taken from STRÅNG's database, the data is then used to calculate the theoretical power produced by the solar cells. Energy efficiency is analysed in two ways.

Already in the late 1970´s it became clear that the traditional catalogs in libraries were not suited for children, neither their interests nor their way expressing themselves were accounted for. The goal of this thesis is to investigate if and how children?s OPACs (Open public access catalogs) interface design is at present adapted to the presumed audience of children. My method consists of literature studies and an investigation on the graphical interfaces in OPACs for children, according to the five criteria formulated by childrens library consultant Lena Lundgren and IT-consultant Kia Gumbel. The aims are to find out: a) what requirements for children?s OPAC interfaces and their usability are defined in literature and b) what the actual (real) features of the children?s OPAC interfaces are.

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

Syftet med denna uppsats är att identifiera den mest effektiva egenskapen av en text eller sida för att uppnå visuell hierarki, som är ett verktyg för att få det önskade flödet av uppmärksamhet i en sida eller webbsida genom att ge vissa element en viss vikt i kontrast, storlek och placering. Vi vill ge en möjlighet för vidare forskning snarare än att ge en slutsats som ger ett slutgiltigt svar på frågeställningarna. Det finns fler sätt att manipulera text för att uppnå önskad visuell hierarki men vi valde de vanligaste. Detta arbete är baserat på ett experiment som görs på 50 deltagare med ett onlinefrågeformulär och tre självgjorda bilder där vi kan utvärdera resultaten, jämföra dem med andra teorier och beräkna den mest effektiva uppmärksamhetsgivaren. Vi har också utvecklat en hypotes om vad resultatet kommer att visa.

Computer use at work has risen considerably over the past fifteen years and is currently a relatively common phenomenon when 76 percent of women and 72 percent of men using the computer in their daily work (SCB Arbetsmiljörapport 2009).According to Gulliksen and Göransson (2009), Sweden is one of the countries which are more advanced in the procurement of computer systems at work. He means that Sweden has unique opportunities and conditions for user participation in the development of computer systems, when the user has the right to influence their working environment through a law in the Work Environment Act. The paper examines the importance of user involvement in system development and the Swedish company's approach and experience of user involvement. To highlight and explore the importance of user involvement, there has been a case study in which users have been representative of the development process. The case study has been conducted on a case company where the system IST analys was in need of a new interface.

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

A future expansion of wind power in the Nordic power system makes the balancing for the transmission system operator Svenska Kraftnät (SvK) more complicated. Up to the hour of delivery the balance responsible parties? (BRP) makes prognoses and plans, for consumption and production, to help maintain the balance in the electrical grid. How well this is accomplished is affected by the setup of the market design. Therefore SvK has proposed the following possible changes in market design: Increase the imbalance costsIntensify the regulation of imbalancesIncrease the temporal resolution on the different marketsPresent the prices for balancing power in real-timeModify the balancing market to simplify auction of consumption bidsA mapping over the BRPs? processes within planning and trading on the day-ahead, intra-day, and the balancing market has been performed in this thesis.

Abstract In the contemporary world of information technology you find a multitude of applications and systems covering a broad spectrum of areas of need in different companies. One effect of this multitude of programs is the difficulty to make them exchange information with each other or to collaborate, since they are developed by different programming languages for different platforms, with different standards and different data formats. Our aim with this work is to describe how it is possible to tie these programs together to make them actually communicate with each other in order to exchange information, share their native methods and also to become a part of the overall business processes. In this integration task you will, among other things, find different levels of application integration such as data level, method level, application interface level and user interface level integration. Application integration also involves hardware components, called middleware, that facilitate the physical connection between applications.

This paper reports a study in how interaction design and graphic design is affected in the process of developing an mobile application to complement the use of an existing webbsite. The paper also ask how developers are affected in this process by the use of designpatterns. The purpous of the report was to see how designpatterns affects the development of mobile applications and how the interaction and graphic design differs between various company webbsites and their related application. A study was conducted by comparing three diffrent webbsites with three related applications to find material for our thesis. Interviews were conducted on three diffrent companys that work professionaly with creating mobile applications.

The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

The aims of the following project has beento make a proposition how to create aspecific kind of transformer. Thefollowing report evaluates the differentimportant variables and contains asuggestion for a possible design. Intheory it's an ordinary transformer that'ssuppose to transform electrical effect toa high voltage line. The design of thetransformer is using an already existingcurrent transformer design and is adjustedto work for it's specific purpose. Theproject also contains the developing of atransformer simulation model that will beused to evaluate and optimize thedimensions of the resulting transformer..