The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

This is a thesis for a Bachelor Degree Project, performed in the subject MechanicalEngineering. The students Roger Malmberg and Simon Hagberg have carried out adesign project on behalf of the recently established company J&D Assisting systems,located in Halmstad.The project consisted in developing J&D's first prototype of a power assisting solutionfor wheelchairs. A power assisted wheelchair combines human power, which is deliveredby the arms through the pushrims, with electrical motors, which are powered by a battery.The power assisted wheelchair is aimed at customers, who have used a regularwheelchair for a long time, but who have become weaker or just need additional powerwhen driving uphill. This kind of wheelchair will provide additional power for users,which will spare their wrists, elbow and shoulders. The product is torque sensor free andinstead it relies on the velocity.

This paper aims to explore the phenomenon urban wind energy, its visual effect on built environment and the factors that affect the opinion towards new elements in the city. A place study of the city Gävle serves as a complement to the theoretical part of the paper. The theoretical discussion opens with an account for the technical and economical conditions of urban wind energy. It presents the technical basics, different types of turbines and a discussion occurring wind related techniques in built environment. Today, the knowledge of how the wind moves and acts in the rural landscape is quite good.

AbstractAim of the study: Aim of the study was to investigate whether there were any connections in time between different parts of care in patients with cardiac arrest and hypothermia treatment and cognitive and physical function six months after cardiac arrest and to investigate neurological outcome related to primary registered cardiac arrest rhythm after six months and if there were any changes in cognitive and physical functions as well as self-related health between discharge from hospital and six months after cardiac arrest.Method: The study included 39 patients admitted to three Swedish hospitals between 2008-2011. Cognitive and physical function was evaluated with Cerebral Performance Cathegory, CPC completed with Mini Mental State Examination, MMSE for cognitive function and Bartels Index, BI for physical function and Euroqol-VAS for evaluating the self-related health.Result:  A significant connection was shown between time to start hypothermia treatment and BI, patients with longer time showed improved physical function after six months.Majority of the participants (66,7 %) had Ventricular fibrillation/Ventricular tachycardia, VF /VT, as primary registered cardiac arrest rhythm and in this group CPC and BI was significant better compared with the asystole /Pulsless Electrical Aktivity, PEA group.CPC, MMSE, BI and Euroqol-VAS were all improved over time.Conclusion: Participants with VF /VT as primary registered cardias arrest rhythm had significant better cognitive and physical function 6 months after hypothermia-treated cardiac arrest compared with participants with asystole/PEA as primary registered rhythm. This shows the importance of access to defibrillators in public places in the society and in hospitals and optimal education of lay people and medical staff. Cognitive and physical function and self-rated health improves over time, which might be a very important reason to convey patients, relatives and medical staff to continue cognitive and physical rehabilitation. Keywords: Cardiac arrest, hypothermia, cognitive and physical function, wellbeeing.

Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.

AbstractAim of the study: Aim of the study was to investigate whether there were any connections in time between different parts of care in patients with cardiac arrest and hypothermia treatment and cognitive and physical function six months after cardiac arrest and to investigate neurological outcome related to primary registered cardiac arrest rhythm after six months and if there were any changes in cognitive and physical functions as well as self-related health between discharge from hospital and six months after cardiac arrest.Method: The study included 39 patients admitted to three Swedish hospitals between 2008-2011. Cognitive and physical function was evaluated with Cerebral Performance Cathegory, CPC completed with Mini Mental State Examination, MMSE for cognitive function and Bartels Index, BI for physical function and Euroqol-VAS for evaluating the self-related health.Result:  A significant connection was shown between time to start hypothermia treatment and BI, patients with longer time showed improved physical function after six months.Majority of the participants (66,7 %) had Ventricular fibrillation/Ventricular tachycardia, VF /VT, as primary registered cardiac arrest rhythm and in this group CPC and BI was significant better compared with the asystole /Pulsless Electrical Aktivity, PEA group.CPC, MMSE, BI and Euroqol-VAS were all improved over time.Conclusion: Participants with VF /VT as primary registered cardias arrest rhythm had significant better cognitive and physical function 6 months after hypothermia-treated cardiac arrest compared with participants with asystole/PEA as primary registered rhythm. This shows the importance of access to defibrillators in public places in the society and in hospitals and optimal education of lay people and medical staff. Cognitive and physical function and self-rated health improves over time, which might be a very important reason to convey patients, relatives and medical staff to continue cognitive and physical rehabilitation. Keywords: Cardiac arrest, hypothermia, cognitive and physical function, wellbeeing.

To meet the growing amount of waste from electronic and electrical equipment (WEEE) EU developed, year 2002, a directive (2002/96/EG) with the objective to govern the management and reduce the amount of WEEE. The directive is based on producer responsibility which makes the producer responsible for collection and dispose of WEEE. In 2012 a new revised directive (2012/19/EU), with tougher collection targets, was developed. Both the old and the new directive states that the approach to tackle WEEE should be prioritized in order of prevention, reuse and then recycling. Hitherto the amounts of WEEE has increased every year, making it relevant to examine which type of preventive measures the directive contains and how effective they are.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Grubbe Ventilation AB is a sheet metal and ventilation company who provides design, installation, service, and repair of ventilation. The company is expanding their business by building a new facility in Umeå, Västerbotten. The property is designed to be used for both office and industrial work.Grubbe Ventelation AB has not yet decided upon wish system which is to be established to provide the building with heating and cooling. The consulting firm Umeå Projekt Team has therefore been asked to investigate the possibilities to invest in geothermal- heating and cooling.If the investigation of a geothermal heating- and cooling system would provide favorable results it would be a very appropriate alternative that provides energy at low costs and are an environmentally friendly option as the energy comes from stored solar energy in the ground is provided by stored solar energy in the ground.The facility ´s heating and cooling consumptions are calculated in the program BV2 and the result indicate a heating demand of 185 000 kWh per year due to thermal transmittance, transmission losses, heating of warm water and a cooling requirement of 5500 kWh.Three different systems of geothermal heating and cooling were tested in the computer program Energy Earth Design. The results show no difference in the dimensioning of the drill hole if merely heating were to be used or both heating and cooling were to be established.

Syftet med detta projektarbete var att minska energiförlusterna i Getrag All Wheel Drives hypoidväxlar (se kapitel 7.2.3). Uppdraget bestod främst av att minska förlusterna när systemet endast driver på två hjul och de övriga hjulparen endast överför låga kraftmoment, detta förhållande benämns draggmoment. För att kunna utvärdera och peka på förbättringsområden var första steget i arbetet att lokalisera och värdera enskilda komponenter som tillförde förluster. De ingående komponenter som studerades grundligt var lager, Kuggkontakt, olja och tätningar. Värderingen av komponenternas respektive förlustbidrag erhölls genom provning och beräkningar.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

The main purpose of this essay is to investigate if Latvia´s pattern of trade has become more similar to the mature market economies, after Latvia´s independence 1991.Today, the intra-industry trade (IIT) dominates the trade of mature market economies. One of the pioneers of intra-industrial trade is Paul Krugman, who was the first to emphasize the importance "of scale and consumers' desire for variety" in explaining the basis for modern commerce. Customers get more variety and usually cheaper goods when the market gets bigger. I mainly use the modern trade theories to explain the trade pattern in Latvia. To measure how Latvia has developed its intra-industry trade, and thereby is approaching the mature market economies´ trade pattern, I use the Grubel-Lloyd index (GL-index).

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The society of today is dependent of secure transports and deliveries of electrical power. Interruptions in different activities because of fallen trees cost a great deal of money in form of reparations and claimed damages for transport companies and electrical suppliers. Fallen trees along some railway sections are a severe problem. For instance, to repair the damages of the storm of week 5 year 2002, costed 2 800 000 SEK for the line region of Hässleholm. Today, the Banverket railroad company has no norms in general for how close to the railway the forest is allowed to grow.