To achieve an optimal combustion, an even air/fuel ratio in the combustion chamber is required. An optimal combustion leads to reduced amount of emissions due to a more complete combustion, which is an important matter because of the sharpened environmental laws. This can be attained, among other things, by applying entirely variable cam times. To optimize the engines efficiency and its emissions at all workloads and speeds, an active valve control can be applied. This means that the intake and exhaust-valves can be opened and closed at any time, independent of the crankshaft position.

What is it that drives a person with criminal behavior to change their lifestyle? What are the obstacles to a lifestyle change? These issues have been guiding us during this study. In the introduction, we describe the previous research that has been done among crime in men. The themes that will follow us through the course of the study are as follows; cause of crime, Self-efficacy, social network and lifestyle change. The aim of the study was to investigate the factors that a former prison convicted individual believes has been significant, as they break their criminal behavior associated with a lifestyle change.

Public concern about the release of toxic compounds from wood-based products drives legislation towards enforcing industries to find and use more sustainable solutions for wood treatment. Plant oils are good alternatives to treat wood, minimizing or even neutralizing the impact on the environment. Wood modification with epoxidised linseed oil (ELO) and acetic acid as catalyst has proven a suitable method to impregnate and protect wood. However, the mixture presents a serious inconvenience because of the quick polymerization of the ingredients that limits its practical application. Therefore, this study was designed to evaluate an alternative method using a two-step process which bypassed the problem above.

One of ABB Power Systems´s business areas is HVDC (High Voltage Direct Current) technology. HVDC is used for transmissions for both short and long distances. One of Power Systems?s products is called HVDC Light. HVDC Light is a relatively new technology for power transmission, but have before only been used for motor drives applications.

Gtherm is an innovation company who has an unique air heat exchanger underdevelopment. The purpose of this thesis is to provide data of suitable motors for theheat exchanger and to find suitable motor suppliers.A motor specification was designed. It is an important basis for the search of suitablemotors. A compilation was made of nine motor suppliers and the suitable motorsfrom those. The compilation can be used by GTherm in their choice of suppliers andmotors.The compilation of the demands on the motor and analysis of suppliers indicated thatthere were no standard motors available to GTherms air heat exchanger.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

I detta examensarbete har en undersökning utförts på konsultföretaget ÅF, och deras arbetssätt inom dokumentation och kontrollanläggningar för att utreda om det fanns effektiviseringspotentialer. Undersökningen har i största del innefattat intervjuer med verksamma konsulter inom kontrollanläggningar och elmontage på transformatorstationer. Konsulterna arbetade som konstruktörer och tog fram ritningar främst till kontrollutrustningar. Resultatet från intervjuerna analyserades för att sedan dra slutsatser om effektiviseringsmöjligheter inom verksamheten. Olika kontor i verksamheten undersöktes och arbetssättet varierade på de olika kontoren.

An ongoing concern within the Intellectual Technological world is the issue of security. There are severe consequences if someone without permission searches a computer for secret information that was left unlocked. In order to prevent this situation from occurring, rules about password lengths or employees bringing personal flash drives into the company should be created and followed.As Internet become a worldwide phenomenon, the use of information technology is growing more than ever. With more use and accessibility to Internet, new threats against companies have also emerged. This report brings up the main issues that a company needs to regulate today.The standard for regulations and proposals for IT-security comes in a document called ISO 17799 and very complicated for those who are not experts in the field.

The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

This study examines counselors understanding of body fixation (alt: body image fixation) as a social problem among young women aged 15-25 years. Earlier research on this subject highlights the standards and ideals placed on the female body where happiness is associated with a slim body figure. Research has shown that young women that compare their own bodies with others are at higher risk at developing an unhealthy relationship with their body, which can lead to eating disorders. The data for this study was collected through semi-structured interviews with nine counselors from youth clinics, schools and primary healthcare. The results were interpreted and analysed in the light of social constructionist perspective as developed by Berger & Luckmann and Loseke's social constructionist definition of social problems.

Electrical stunning is the method that has been used in Sweden to stun broilers prior to slaughter. However, for reasons of animal welfare and meat quality, research has been made in the EU to develop new stunning methods. Gas stunning is now regarded as the best alternative. In this study literature has been reviewed with focus on different gas stunning systems and observations have been made at two different slaughterhouses regarding animal welfare before, during and directly after stunning. At one slaughter plant carbondioxide was used in a two-stage system where the birds were standing on a conveyer belt during the stunning procedure.

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.

This paper examines the power producing dams along the Ume-river as an integral part of and a result from the urbanization process in Sweden during industrial capitalism. The aim of the paper is to contribute to the knowledge of the urbanization process in Sweden in general and of its traces along the Ume river in the county of Västerbotten in particular. The paper applies the theory of concentrated urbanization and extended urbanization put forward by Neil Brenner and Christian Schmid (2015) and argues that the building of power producing dams along the Ume-river is part of an extended urbanization process. This becomes particularly evident when examining the vast physical structures that is the dams, situated in an otherwise remote and sparsely populated area. These vast physical structures are also very well connected to a nation wide electric grid that has connections to bordering countries as well.

This paper examines the power producing dams along the Ume-river as an integral part of and a result from the urbanization process in Sweden during industrial capitalism. The aim of the paper is to contribute to the knowledge of the urbanization process in Sweden in general and of its traces along the Ume river in the county of Västerbotten in particular. The paper applies the theory of concentrated urbanization and extended urbanization put forward by Neil Brenner and Christian Schmid (2015) and argues that the building of power producing dams along the Ume-river is part of an extended urbanization process. This becomes particularly evident when examining the vast physical structures that is the dams, situated in an otherwise remote and sparsely populated area. These vast physical structures are also very well connected to a nation wide electric grid that has connections to bordering countries as well.

Seabased Industry AB develops system for extracting electrical energy from ocean waves with a Wave Energy Converter (WEC). The components is bought from subcontractors and then assembled into wave energy converters, buoys and marine substations by Seabased. In the future Seabased will produce more of the components themselves to reduce costs and to have better control over tolerances. The production line will also include the painting of the WECs and substations, which is performed in a painting line.The purpose of this thesis work is to study what is required to build a painting line, regarding the types of stations, transporting types and the space needed. This will result in layouts for the painting line.To receive the necessary information about production theory and corrosion and surface treatment, literature concerning this area has been studied.