Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

The community Vessigebro, in Falkenberg and its surrounding areas housing one percent of all dairy cattle and two percent of all pigs in Sweden. This means that there is a large amount of manure as a basis for producing biogas in the area. A number of farmers have therefore formed a cooperative named Vessigebro biogas and started the project Green Vessigebro, with the goal of creating the conditions for a more profitable and more sustainable agriculture production.The study deals with the conditions and sale opportunities of the feasibility study Green Vessigebro. The study has looked at the work that was previously carried out for the biogas that could be produced on the farms in Vessigebro, The main pipeline for natural gas on the Swedish west coast and its operators, the Swedish Competition Act , Electricity Act , Natural Gas Act, the District Heating Act , Sustainability Act , previously proposed measures, municipality interest in biogas from Vessigebro , possible collaborations, possible sale opportunities and perform calculations with data from the municipality Ljungby for a suggested transportation of biogas between Vessigebro and Ljungby.The study shows that there are several interesting sale opportunities for biogas from Vessigebro. The production and use of biogas in Sweden is increasing and the trend seems set to continue.

Bakgrund: Hydroware Elevation Technology AB är ett företag som är specialiserat på och har lång erfarenhet av styr- och drivteknik för hydrauliska hissar. Företagets huvudsakliga fokus är att bygga om befintliga hissar men det erbjuder även nyproduktion. Denna uppsats fokuserar på Hydrowares tyska marknad och utgår från företagets förutsättningar och önskemål för att komma fram till ett förslag till lokalisering av ett nytt DC för just denna marknad.Syfte: Syftet med denna uppsats är att undersöka hur Hydrowares inleverans av material och distribution av hydrauliska hissar för försäljning på den tyska marknaden fungerar för att kunna identifiera hur det kan fungera bättre. Vidare är syftet att med hjälp av tyngdpunktsmetoden identifiera förläggningsplatsen för Hydrowares DC för den tyska marknaden. Slutligen är syftet att ta reda på var Hydroware ska förlägga sitt DC för den tyska marknaden med hänsyn tagen till såväl påverkningsbara faktorer som tyngdpunktsmetodens utfall, vilka kommer att behandlas i uppsatsens teoriavsnitt.Metod: Denna uppsats är en fallstudie som har genomförts på Hydroware.

The aim of the study is to examine how different factors,such as views on how knowledge is produced and howlearning takes place, effect the way an academic librarymanages space. This is done by looking into how a specificlibrary, namely Library & Learning Resources (LLR) at theUniversity of Borås, by re-planning the building?s structure,design and functions, can support the students? differentstudying habits. The analysis is performed by using a theoreticalperspective built by a model first created by thearchitect Daniel Koch. The model is designed to look uponhow space produces meaning and knowledge.

ABB and Prevas have initiated a collaboration to sell a system to optimize steel industry furnaces, called FOCS. The purpose of this thesis is to investigate possibilities for integrating Prevas FOCS and ABB 800xA.The result of the investigation is used for an implementation of a prototype of the integrated system. The study shows a general method that can be used when implementing two software systems. The prototype of the integrated systems is made with usability principles in mind. This is a very important aspect in order to create a good working environment for the operators of a steel plant.

The main purpose of this thesis has been to investigate librarians opinions about the need for and possibility to use non-roman script in library catalogues. We have also investigated the routines of handling materials in non-roman scripts in two Swedish libraries. The investigation was made in the light of the recent shift in character set in the Swedish National Library Catalogue Libris. This change will enable use of multiple writing systems in the future.Our findings are that a multicultural society requires special consideration to the needs of citizens who speak other languages than the majority of the population. This becomes difficult when the languages spoken have a different writing system than the one used by the majority.

The trend in milk production is similar in Sweden and across the world; the farms are getting fewer but increasingly bigger. The costs for hiring workers are increasing, which results in more cows per animal keeper. Sensors can then be a great tool for keeping track of animals which need special attention. With a reported decreasing fertility, sensors that can detect oestrus even at low levels can be especially helpful in bigger herds to pinpoint the cows that may be in oestrus. The number of farms with dairy cows that install AMS, Automatic Milking Systems, are increasing, and that also increases the need for sensors to control milk quality and composition when there is no visual control of the milk by a milker before milking starts.For the sensor data to be useful you have to have software designed to analyze and interpret the data to get relevant information that the farmer can use.

This report describes the working process and creation of a new website for Lindt & Sprüngli Sweden with the help of the content management systems Magento and TYPO3. The report shows how different elements are created and published on the website, how the education in these systems was acquired and how contact with third party companies has been initiated and maintained. It also accounts for what is shown on the website as well as why it is shown. The goal with this project is to deliver a complete website to Lindt & Sprüngli Sweden where customers can find information about products as well as the company. The results of this project was a website that was launched on www.lindt.se on the 17th of June 2015..

At Saab Aerospace in Linköping, components for measurement systems to the fighter aircraft JAS 39 Gripen are developed. In this activity you sometimes want to record the traffic transmitted on the data busses that connects different sys-tems. This traffic on the data busses is using the military standard MIL-STD-1553. This project has aimed to create a system for recording and sending 1553-data. The system is used on an ordinary personal computer, equipped with a recon- figurable I/O card that among others has a programmable logic circuit (FPGA).

The aim of this essay is, with reference to a close study on the negotiation delegations of the Tenant Association, to examine the principals of democracy in relation to distribution of power and participation, efficiency and professionalism. This is done with the intention to understand the Tenant Association's view on its own commission as negotiator, according to democracy. The investigation is carried out on the Tenant Association in the Swedish cities of Stockholm, Malmö and Gothenborg.The data acquisition was obtained by using a questionnaire and through interviews with representatives from the Tenant Association negotiation delegation.A central conclusion from this investigation is that the representatives of the Tenant Association generally are satisfied with the democracy model used in the organisation, despite awareness of the fact that there are some failures with representation amongst younger people, women and immigrants. Also, they suggest that the model with representative democracy is by all means the most useful because of its arrangement and efficiency in decision making processes.The policies of the Tenant Association, considering distribution of power and participation between elected representatives and employees, are legitimated by the negotiation delegates. However, there is obvious discrepancy in the look upon their respective tasks between the delegates and the chief negotiators.One can recognise the development of democracy that is called New Public Management in this survey.

Haptoglobin is an acute phase protein with important biological role because of its capacity to bind to haemoglobin. Haptoglobin exists in three major genetic polymorphism types: Hp1-1, Hp2-1 and Hp2-2, the distribution of which has been associated with abdominal aortic aneurysm (AAA), an asymptomatic aortic disease common among men older than 65 years.    Five different electrophoretic methods were tested according to their ability to separate the haptoglobin phenotypes. The detection was based on a produced hemolysate of blood in which haemoglobin binds to haptoglobin thereby forming a complex that can be detected by specific haemoglobin staining using TMB-dihydrochloride and hydro peroxide as substrate resulting in an azure-green color of the bands. Samples from 15 patients who had suffered surgery for not broken AAA, that is more than5.0 cmaortic diameter, and 15 samples from matched controls were analyzed.    Among the five tested electrophoretic methods best migration and separation was seen on the pre-cast agarosgel Hydragel HR on the instrument Hydrasys. The other four methods gave less successful results.

In this master thesis outage statistics covering tree years from two distribution grids are analyzed with the purpose to deduce which factors yield outages. The statistics are extensive therefore allowing in-depth analysis of both customer and system related factors. From this starting point and as a model of explanation energy not supplied is studied as the consequence and the measurement of the inconvenience caused by outages. Different methods for calculating energy not supplied are developed and studied and put in comparison to the method used in Network Performance Assessment Model, which is the Swedish frame work for regulating electricity distribution.Analysis of the outage statistics show a relation between the type category of customer and outages that can be deduced to the variance and the density associated with that customer category. Prioritization of different customer categories is elevated also in this aspect.

Energy efficiency is today more important than ever, mainly due to the high energy prices and the approaching climate changes. Heating of buildings is an essential area within energy efficiency. Many buildings are old and were built at a time when the energy prices were low and the term ?energy efficiency? was unheard of. By applying today?s broad range of energy saving actions on these old, and thereby often, heating ineffective buildings, this area has a large potential in reducing energy consumption and costs.Churches and chapels are generally old buildings with, in many cases, ineffective heating systems and therefore consume much more energy than needed.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.