This study is focused on small scale water and wastewater handling in Sweden. The study is divided into two major parts; the first describes common methods for water- and wastewater handling and the second part is a case study on three small and expensive systems in Gällivare municipality, in the north of Sweden. In the case study, abilitys for the local government to hand over unwanted systems to the water users is investigated and found to be a plausible solution to cut costs for two out of the three studied systems. In the third case, water and wastewater systems is not recommended to be handed over but other ways of cutting costs are suggested..

Certifications is common for IT in relation to individual program languages or program applications. Certifications for educations that endures several years is not as common to see. In this paper the situation for the Systems Science programme is researched, by investigating how the programme looks around in Sweden. Also by using interviews, show how companies and people responsible for the programme in Umeå, think the contact is between them and how the knowledge of the Systems Science students are from the view of the companies that employ them. In the end the conclusions show that there are differences in the Systems Science programme, and that the companies have quite a similar view of what the Systems Science students are good and not so good at.

The computer consultant company Create in Lund AB wishes to facilitate their invoice routines, as it at present is required that the administration finds and compares information from two different systems.The purpose of this thesis is to develop an invoice management system that simplifies the invoice management process for the administration at Create. During the development of the system, I have chosen to follow the software development process Unified Process and also tried to find design patterns that can be applied to the integration.The result of my project is a self-contained application developed using the Java programming language that communicates with the databases of the other two systems and presents relevant information to the user as a set of invoices. Of the 23 design patterns I studied, I used four of them in the invoice management system. However I couldn?t find any connection between any design pattern and the integration of systems.

The increasing administration in IT-systems is the target of much debate today. It is viewed as taking time from what is considered to be managers? real tasks as well as resulting in an ineffective and stressful work environment. This view of IT-systems as problematic and time consuming can also been found among unit managers in a municipality in the north of Sweden. To be able to understand why IT-systems are perceived in this way this study?s aim has been to find what leads to this view.

In the country of Jordan, egg production is very important economically, but several bacte-ria are involved in food borne diseases transmitted from eggs or other poultry products. The most important are Salmonella spp., Campylobacter jejuni and Escherichia coli. In Jordan two different housing systems are used for hens in large scale egg production; con-ventional cages and litter floor systems. Eggs from four different farms were analysed and compared to see if a difference could be found regarding the presence of pathogenic bacte-ria on the egg surfaces between these two systems. Total number of aerobic bacteria was analysed, the presence of Salmonella spp., C.

This bachelor thesis is written as a part of the geography program at Stockholm University, Sweden, and the study was conducted from April to June 2012.Tuberculosis (TB) is an airborne disease and one of the most widespread infectious diseases in the world with more than nine million new cases each year (SMI 2012, digital source). The disease is a major source of death and suffering in many places and the number of deaths remains high despite the availability of highly efficacious treatment. To control and prevent further spread of TB, the mapping of the disease spatial distribution is of essential importance.In this study, maps were produced that shows the spatial distribution of TB between the years 2002 to 2011 in the municipality of Stockholm. These maps allow an analysis of the spatial distribution at a local scale over time.The aim of this paper is to study how the spatial distribution of TB has looked like in the municipality of Stockholm the last 10 years and to analyze why the spatial distribution of the disease looked like it did. This study is based on the hypothesis ?drift?.

The purpose of this report is to collect, compile and complement the scientific and experience based knowledge concerning high pressure fire fighting today. The goal is to produce a decision data for the Rescue Service concerning the use of high pressure systems for fire fighting. Focus is on hose reel high pressure systems but other systems are discussed too. The report begins by describing the technical properties of the different systems. Then the fire fighting properties are evaluated, including manoeuvrability and safety for users.

The purpose of this thesis for Sapa Heat Transfer is to examine a furnace in which aluminium is pre-heated before hot rolling. The project is modeled in a computer environment in which the air flow in the furnace and the heat transfer to the aluminium solids are included. The computer environment and its governing equations, as well as boundary conditions and generalizations, are presented and explained.The simulations are based on two models. The first model has an asymmetric solid placement, which is how it looks in today's ovens. It is validated against collected data.

This thesis work contains a litterature study about electrical motors in general and how PWM-patterns for brushless DC-motors can be made. A suitable method has been implemented as a simulation model in VHDL. A simulation model of a brushless DC-motor which describes the phasecurrents, torque and angular velocity has also been made. The motor model made simulations easier for the complete PWM-system. The design was synthesised and tested with a prototypeboard including a SPARTAN II FPGA.

The aim of this study was to compare the Query-by-Humming systems Midomi, Musicline and Tunebot regarding their retrieval effectiveness. The aim was to see if there were differences between the systems but also between the user groups common users, musicians and singers. Query-by-Humming system means that the user sings a tune that the system then use to find the right melody.To compare the systems and their users, queries where collected from the different user groups and replayed for the systems. Mean Reciprocal Rank and Friedman test was used to do the comparison.The results showed that the system did not achieve equivalent and that there were no difference between the user groups. The Mean Reciprocal Rank showed that the systems had very different retrieval effectiveness, where Midomi was the system with best result and Musicline with the lowest result..

The voltage regulation in Fortum Distributions medium voltage network in Stockholm does not work satisfactory. This results in too high distribution voltages with many customer complaints as a consequence. The reason is the model responsible for compensating for voltage drops in the distribution network. Despite several adjustments Fortum has not been able to find the source of the high voltages and has therefore appointed an investigation in the form of a thesis work.The aim of this investigation is to locate the error and to produce a proposal regarding the solution of this error using the existing system, common industrial knowledge, state of the art research and the option to use voltage readings from the different substations.The conclusion of this master thesis is that the largest contribution to the high voltage levels is made by the large compensation for distribution loses. Furthermore an additional error in the model has been found.

The purpose of this master thesis is to investigate different types of measures for making buildings more energy efficient and to estimate their profitability. The calculations were performed with the building simulation program VIP+ and the evaluation of the profitability with the life cycle cost method. Furthermore, it was examined how losses in the distribution of secondary systems of district heating can be avoided. Options to replace district heating with a local district heating system based on bio-energy have been investigated. The possibilities of achieving more efficient thermal energy consumption and production for the chosen estate were also examined.The object of the study has been a residential estate with 133 detached houses in Uppsala, built in 1974.

The Swedish energy companies have several different systems for data collection of the energy consumption of their clients. Often computerized remote meter readers are put in practice in order to register the energy consumption of large companies. The majority of household clients, however, are read off by the assistance of manual methods. Household power consumption is read off once a year. As a result, these clients are not debited for their actual consumption; their invoices during the year are the result of estimations.

The connection between management control systems for controlling sustainability and a firm's motivation for engaging in sustainability is not completely understood (Arjaliès & Mundy, 2013). The aim of this thesis is to develop a more profound understanding for management control in achieving sustainable companies. To do this, we raise the question: How and to what extent do companies use management control systems to achieve sustainability compliance Simons's Levers of Control (1995) are applied to this question in order to get a consistent and thorough insight of management control systems. Hence, a case study of ABB:s work to achieve material compliance in accordance with EU-regulation was conducted. The findings of the case study reveal that ABB uses the regulations as explicit goals and implement them in sustainability procedures.

The purpose of this master thesis is to, with the strategies of the organization and the preferences of the co-workers in mind, explore how reward systems can be designed in heterogeneous organizations. This is done by interviewing store managers and sales personnel in a heterogeneous organization. The frame of reference deals with theoretical approaches on reward systems and is divided in the following sections, individual or group based, differentiated or not differentiated rewards systems and goals, measurements and rewards. These sections are highlighted from the following aspects, equity, implementation possibilities and finally environment. The theoretical discussion ends in the conclusion that heterogeneous organizations should have several different reward systems, but not if a restructuring process is in progress or the system becomes too costly.