This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This final thesis contains three major parts, which all have been time demanding:* Designing and construction of a small wind turbine.* Designing and construction of an electrical system.* Thesis with fundamental facts about wind, wind power and design.The thesis contains basic theory in wind power and the energy systems it can be combined with. Different types of wind turbines, which components they consists of and important issues to consider when designing is also mentioned. In the end of this report the technique of our wind turbine will be presented. In the end you can also read about our experiences during the time of designing and construction..

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This thesis has been done in order to ease the process of drawing schematics ofelectrical wiring. The need arose after demand from the government due to a seriesof incidents that took place during the revision of the nuclear power plant in year2009.The task of the project has been to create a computer program that can generate agraphical representation of the electrical components relations. The basis for theprogram has been an example of how the client wants the graphical representation tolook. During the course of the project weekly meetings have occured in which theclient has reviewed the work.The result of the project is a program written in Visual Basic Applications that can berun in Microsoft Excel. The program is capable of generating graphics for a majority ofthe cases.

In supporting an efficient way to gather and develop contact information for the Uppsala Association of Technology Physicist alumni, it is crucial to have in place an adequate and user-friendly system allowing the continuous collection and storage of such contact information. This can achieved by the creation of a website where alumni can enter information about themselves and where such information in turn is stored in a database. A database containing relevant tables has been developed in MySQL. In utilizing phpMyAdmin, the programming language PHP and Web Server Apache, a fully functional website to be included on the Association's website has been created..

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.

Målet med detta projekt var att hjälpa IT-Mästaren att kunna fakturera sina kunder på ett smidigare sätt. Deras dåvarande lösning av kundernas dataanvändning var tidskrävande och ineffektivt, därför ville de automatisera systemet. Det nya systemet skulle användas för att administrera kundernas servrar med hjälp av ett grafiskt gränssnitt och sedan kontakta dem för att få fram olika värden för respektive kund som ska presenteras på IT-Mästarens hemsida. På så sätt skulle de kunna fakturera sina kunder på ett mer effektivt sätt och även få bättre överblick av kundernas användning. I och med utvecklingen utav detta system så fördjupande jag mig dels i egna kända områden men jag lärde mig också nya kunskaper. Det gällde inte enbart teknisk utveckling utan också undersökning av exempelvis hämtningen av alla data som skulle göras.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

Aerated steam treatment is a modern and environmental friendly method for seed borne fungus sanitation, mainly used on cereals. The method involves exposure to heat and high humidity, factors which are known to induce a fast ageing of seeds, thus resulting in reduced storability. This thesis clarifies the interdependence between seed age and the aerated steam treatment intensities. Two studies were carried out in this thesis. In the first study the storage longevity of seeds treated with aerated steam was examined. The second study investigated the shelf-life of the pre-tests used to determine the aerated steam treatment tolerance of a seed lot, by testing the treatment tolerance of seeds aged prior to the treatment.

At the Division of Electricity at Uppsala University there is an experimental rig forhydroelectric generators. The experimental rig?s vital part is a 12-pole synchronousmachine, whose electrical characterizing parameters (resistances, inductances andtime constants) are unknown. The aim of this thesis is to characterize the machine inits current state by perform a Standstill Frequency Response (SSFR) test. From theanalysis of the measurement data, which is a part of the test, a set of basic parametershave been received.

The high level of energy consumption that the industrialised countries have reached and thepollution that this brings has long been a cause for analysis and debate, development and usageof so called renewable energy sources is therefore more important than ever. The energy in theelectromagnetic radiation from the sun is an interesting alternative. One way of harvesting thisenergy is by using solar cells, devices that generate DC current when exposed to electromagneticradiation.The goal of this master?s thesis was to design a solar powered power supply to Syntronic AB?sMidrange platform. The envisioned application is a stand-alone distributed embedded system,for example a node-based temperature monitoring system.

I dagens samhälle har många kundföretag problem med datalagringen vilket beror på att behovet av att lagra data började öka kraftigt under 2000-talet och har fortsatt öka sedan dess. När kundföretagen började använda sig av virtualisering så expanderade även datastorleken. I samband med att datastorleken växte ville företagen att data inte skulle lagras lokalt utan att den skulle vara lagrad på en central plats som en serverhall och vara överskådlig.Studien utfördes på tre sätt, först undersöktes vilka datalagringslösningar som fanns och det skedde genom litteraturstudier. Därefter kontaktades företag som använde olika lösningar för datalagring. Nästa steg var att kontakta de leverantörer som kundföretag använde sig av och som levererade lösningarna.Under arbetets gång upptäcktes olika lösningar på problematiken med ett ökat datalagringsbehov.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

This report describes a bachelor thesis work performed at the cloud storage company CloudMe in Linköping, Sweden. The storage service provided by CloudMe allows users to access their files seamlessly from multiple units at the same time. In the cloud there is storage provided for contacts, calendar and e-mail, which is data nowadays normally used by smart phones.Exchange ActiveSync is a protocol developed by Microsoft which, among much more, provides functionality to synchronize the previously described data. This protocol is supported by the smart phone developers and the ability to synchronize over the exchange protocol is implemented in products by default. Due to this fact it would be preferable to implement support for synchronization from CloudMe to phones over this protocol.

Skillingaryds stålrörsindustri AB handles different kinds of steel pipes and got theirmarket mainly in the furniture industry and in department stores. At the momentthe company find themselves in a strong up going course. In a few years thecompany?s turnover has increased with over 10 million SEK. This has led to ademand for structure changes and reorganizing through the company.