The number of residential fires has not declined sufficiently since the smoke alarm entranced the Swedish homes, fires lead to devastating consequences in which possessions, homes and worst of all human lives are at stake. Every year, about 80 people get killed and more than 500 get´s injured in residential fires, often due to lack of safety equipment. The number of fires caused by electrical appliances has risen and taken over a period of ten years the fire caused by a forgotten stove has increased by 70 percent. Preventing the risk that a fire would start on the stove would saves money, worry and most importantly, lives..

Aiming to contribute to the discourse on the sustainability of consociational democracy in plural societies, this case study provides an examination of Lebanon?s power sharing model. The study begins with an evaluation of the Taif Agreement. After acknowledging its effect on Lebanon?s consociational system the function and operation of Lijphart?s four consociational elements are analyzed.

Article 4.1(h) in the Rome I regulation establishes which law that will be applicable on contracts concerning financial instruments concluded in multilateral systems. The main problem is that most contracts concluded within these systems have standard clauses which contain a clause on the applicable law. If this is the case, Article 3.1 in the Rome I Regulation is applicable instead. This problem makes it difficult to find a need for article 4.1(h) if it will only be applicable in exceptional cases. However, the legal position on this matter is still unclear since the Rome I Regulation has just been put into force.

In hydropower plants it is necessary to always have local power supply. Therefore, the plants are equipped with batteries as stationary back up power. Vattenfall Vattenkraft is using lead acid batteries but has been investigating alternatives to replace them. The aim of this study is to investigate the potential of using Li-ion technology as back up power.The study showed that Li-ion batteries have many qualities. The Li-ion technology will decrease the space and maintenance demand.

Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.

This thesis aims to shed light on the collection of Oriental manuscripts at the Uppsala University Library Carolina Rediviva and how the collection is a part of the collective memory. The main question which is central for this thesis is: have orientalism and structures of power influenced the acquisition, arrangement and methods of accessability regarding the Oriental manuscripts? If yes, in what way and why? If no, how has this been avoided?The theoretical framework consists of four approaches: phenomenology, sociology of knowledge, orientalism and power which are applied to the archival concept of collective memory. The main source of material consists of three parts: the historical texts which gives an informational framework regarding the time and place in which the manuscripts were collected, the catalogues in which the manuscripts are described and the transcripted interviews alongside correspondence. Methodologically the thesis is based upon a qualitative method which also partly makes up the foundation for the main material.

The company GEMS PET Systems produces cyclotrons which is a type of particle accelerator. The cyclotrons create log files that are analyzed by the company?s employees for different purposes like troubleshooting or installation. The purpose of the project is to with a usage-centered design method create a paper prototype of a tool that will help the employees to analyze the log files in a more efficient way than earlier.The result shows how the usage-centered design method was used to create the paper prototype and how the user interface was created according to human-computer interaction (HCI)..

This bachelor thesis in science Informatics contains the qualifications for the applying of IT in education for students in elementary school, grade 1-3. By empirical case study on an existing elementary school, whose success on IT use is noticed, describes how to apply IT in the classroom in an adequate way. We look at different theoretical frameworks in interaction and design of systems designed for learning purposes, and satisfies their specific needs and situations within the classroom's four walls. The current lack of statistical measurements on students' results and effects of the use of IT in teaching, prevents further improvements. If we simultaneously work to develop more well-designed systems that are designed for this purpose, it is possible that the effects become more and better.

The purpose of this study was to examine the laws, govern documents and guiding principals that are available for schools and their work regarding the work against discrimination, insulting and other forms of harassments, and then to form a method for the schools to implement this work in practice.The work to counteract discrimination, insult treatment and other forms of harassments should be done both in a short term and a long term. In this paper there is a presentation of a project, a set of lessons that was created and carried out as a trial. The project aims for conscious making among children and students in school regarding norm, deviation, discrimination and power and the fact that equal treatment is hard to achieve. The basic purpose behind the project is to offer a tool to schools and teachers so that they can decrease the possible gap between the laws and the practice of these laws by creating awareness among students and other teachers. The long term work for achieving equal treatment should be done on a political level.

Ethiopia is the country with most livestock per capita on the continent of Africa. There are 34.5 million cattle that are used for drought, meat- and milkproduction and 85% of the population rely on agriculture for their survival in some way. Milk is produced in four main systems, through pastoralism in the lowlands, in mixed crop-livestock systems in the highlands, in and near big cities with only one or two cows, and in intensive farming systems. There are 17 cattle breeds in Ethiopia and some of them are more suitable for milk production than others. Several environmental and economic problems arise from livestock holding in the country, for example overgrazing, low production due to feed shortage, low quality of the avaible feed and non-existing breeding programs.

I denna rapport redogör projektgruppen för resultatet i kursen examensarbete 15hp (C-nivå) utfört på maskiningenjörsprogrammet, inriktning produktutveckling och design, vid Jönköpings Tekniska Högskola.Examensarbetet har utförts i samarbete med Kongsberg Power Product Systems AB i Ljungsarp. Syftet var att utveckla en ny typ av övre teleskopfunktion till Kongsbergs modulsystem för ställbara rattstänger.Utgångspunkten i projektet var att skapa en mer ergonomisk förarmiljö, något som Kongsbergs kunder och marknaden för långsamtgående fordon allt mer efterfrågar. Kraven som ställts på projektet bestod i största del av axiella och radiella krafter som konstruktionen skulle klara av, samt den axiella förlängningen av rattstången.För att strukturera arbetet har en produktutvecklingsmetod från boken The Mechanical Design Process av David G. Ullman använts. Dessa metoder har använts i genomförandefasen för att leda fram till resultatet.Projektet har resulterat i ett koncept som löser Kongsbergs krav på förbättrad förarergonomi..

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Violence is put in a specific context when the police are the perpetrator of violence rendering violence possibly legitimate through sovereignty. The possibility of legitimization of police violence raises important questions of how such violence is legitimized and how resistance is conceived of and defined. I have interviewed seven people in Sweden from different backgrounds, all of whom share the experience of having been subjugated to police violence, including threats, harassments and physical violence.This paper analyzes the performativity of police violence through the relations between police violence, power, sovereignty, subjectstatus and resistance, in order to understand how police violence is being legitimized and to understand its consequenses with respect to those subjugated to it. I?ve also analyzed if this violence is being politicized and, in that case, how politicization is made possible.

When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

The more leadership you get, the more power you will receive. Unfortunately, not everyone is given the same opportunities. This can be seen and proved on the basis of studies in media companies. Our purpose concerns attitudes towards female leadership in Moscow, Russia. This thesis was based on two study methods, qualitative interviews and observations.