Det här examensarbetet har genomförts i samarbete med Metso Dynapac AB i Karlskrona. På deras asfaltsvältar finns idag olika modeller av körspakar. De har samma grundfunktion och bör kunna samordnas till ett gemensamt reglage. Detta ger möjligheter att använda rationell tillverkningsmetod p.g.a. volymen.

During the early 1990´s, the Swedish commercial air traffic was de-regulated and the new market-condition made it possible for low-budget airlines to enter the Swedish market. The former monopolistic airline company, Scandinavian Airline Systems (SAS), was facing a new type of competition which had the advantage of offering much cheaper air trips than SAS. Adding the decrease of profitability that struck SAS as well as other airline companies after the terrorist attacks on the 11th of September, forced them to carry out a mayor reorganization programme. The programme, called ?Turn Around 2005?, was a direct economical measure that begun in 2002 and lasted until 2005 and resulted in a cost saving of 14,5 billion SEK as well as a notice or a transfer of 6000 employees.The purpose of this essay is to investigate if the opinion of the consumer, the image, corresponds with the profile that SAS wishes to mediate today.

This paper deals with breaks in upper secondary school. The aim with the study was to study the function of breaks for upper secondary students by investigating students? activities during breaks with the main issues: ?what does the students do during breaks??, ?how do they experience breaks?? and ?What is the relation between breaks and lessons??.A combination of the two complementary methods observation and interview was chosen to study this. The study was executed on an upper secondary school during one month. I have visited the school several times every week and written daily notes over my observations.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

Denna uppsats handlar om en kurs, vid namn Elkompetens A, en grundläggande, men också behörighetsgivande kurs som ingår i Elprogrammets obligatoriska kurser. Den genomförs vid Carlsunds Utbildningscentrum i Motala på elprogrammets första årskurs.I detta arbete har jag försökt få svar på, vilken av två olika arbetsupplägg, som gav eleverna mest utbyte i form av kunskaper att bygga vidare på i nästkommande årskurser. Den stora skillnaden i uppläggen, är utgångspunkten för kursen. Efterforskningen är i första hand byggd på intervjuer med elever ur två olika årskullar..

The initiative for this project was taken by Benteler Engineering Services, as a result of having identified areas of improvement, in designated accessible areas like the wheelchair spot onboard buses. Depending on a wheelchair to be able to move around can understandably be challenging.Public transport is a common good in today`s society, however despite the measures taken towards adjusting to accessible needs, the majority of those being disabled chose different alternatives of transportation. This is due to reasons such as the drivers' poor attitude, furthermore the limitations of the space allocated to accessible needs, as people with strollers also use these spots onboard. Also, some wheelchair users find the rides unsafe, as they could easily fall over during without the appropriate space for them onboard the buses etc. These are only a few reasons why other options are sought out, i.e.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

This examination paper is an account for the author?s work to arrange and registrate the business archive and business records of court jeweller W. A. Bolin AB from 1916 until present day, and a part of the one-year Masters Programme in Archival Science at the University of Uppsala. Problems that have been encountered are treated, as well as motivations of the decisions made during the process.

This report describes a master thesis performed at Saab in Arboga. The main purpose was to build a controller for a system containing a turn table and an antenna beam. The idea is to use this system on a boat where it will be exposed to position disturbances due to waves. The desired behaviour is that antennas placed on the antenna beam should point towards the same target all the time. To solve this problem the system has been modeled and simulated in Matlab and Simulink.

This report is the result of a thesis conducted at the consulting firm Bjerking AB andis the final part of the Bachelor Programme in Construction Engineering at Universityof Uppsala. The work aims to investigate the costs and how the choice of ventilationsystem affects building projects during a long-term period. This report covers costssuch as investment, maintenance and energy but also how they affect residents andbuilders. Building regulations for energy consumption are expected to be tougher;therefore a comparison of two different heat recovery ventilation systems(HRV-system) was made. One system is based on a centrally placed unit that coversthe whole buildings ventilation through vertical shafts.

This BSc thesis is a part of an initial step of a collaboration between Skansen and Kenyan Wildlife Service (KWS) and constitutes of an inventory of the Nairobi Animal Orphanage run by KWS. Animal Orphanage takes care of orphaned and injured animals arriving from throughout Kenya. The project started out as a refuge and as a temporary place for animals in need of care and help. With time it has evolved to an establishment that resembles and functions more like an animal zoo. The aim of this inventory is to focus on how the biological needs of Congo grey parrots ( Psittacus erithacus erithacus) and cheetahs (Acinonyx jubatus) are met, in terms of management and housing.

The object under investigation in this Master?s thesis is students? information use in connection to Bachelor thesis writing. The purpose of the study is to increase understanding of why nursing students and product engineering design students are using information in such different ways despite their comparable starting point. The empirical material consists of 18 student theses and a document comprising directives for thesis writing that are analysed from three different theoretical perspectives. A citation analysis of all 18 theses is carried out.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

The Airsoft Community always search for realism and optimal performance.When the performance and/or the realism in your AEG1 aren?t enough you turn to modifications toimprove the weapon. But to manufacture such modifications isn?t that easy, hence you turn tocompanies that are specialized in creating such devices.The goal with this project is to create a prototype of a modification called ?Programmable MOSFET?and targets optimization of the electrical components within the AEG. This means that you digitalizethe control of your AEG thus entails new functions and more stability to the system that isn?t possiblewith its mechanical predecessor.A prototype has been manufactured and programmed with functions according to requirementspecificationsthen it was tested on an airsoft-gearbox with rewarding results.

Title: The qualified audit report ? a study of Board of Director, Private Corporation and auditor?s impact.                      Seminar date: 31th of May, 2011Authors: Annika Jonasson & Emma SwanbergSupervisor: Andreas Jansson                Education: the Business Administration and Economics Programme      Course: Thesis, the Business, Administration and Economics Programme, 30 creditsKeywords: Qualified audit report, accounting, audit, auditor, board of directors private corporation, stakeholderBackground: It is important for the company's stakeholders to receive information what affects qualified audit report. The information is also important for the company?s management or owner in order to prevent qualified audit report. Board of directors (the ability to control the owners or management and provide critical resources), the management or owners (incentives to manipulate the annual report) and auditors (the ability to discover and report false financial statements) may have an impact why Swedish private corporations receiving qualified audit reports.  Purpose: The overall purpose is to examine why Swedish Private Corporation receives qualified audit reports.Methodology: In order to fulfill the purpose of our thesis a deductive approach is used.