The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create Electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

This master thesis describes the development of an UPS module. UPS is an acronym for Uninterruptable Power Supply. The UPS module has been developed at the company AerotechTelub AB. The UPS module delivers the necessary voltage and current in case of a power interrupt. If a power interrupt occur, the computer system has one to three minutes available to store data and shut down correctly.

The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

This is a master thesis work carried out at the Department of Energy and Environment atthe Division of Electric power Engineering. The master thesis work describes the theoryof distance protection relaying in 130 kV meshed distribution networks. The main aim ofthe thesis was to construct an Excel application for calculation and documentation of thesettings for distance protection relays. The program is based on general methods forcalculating settings of the different zones for the distance relay and presents the settingsin simple graphics using quadrilateral characteristics.The reason for building an Excel based application is the great variety of distanceprotection relays in live networks. The manufacturers of distance protection relays makeprogram for documentation available, however, they are based on the typical settings forthe specific relays.

The purpose of this project was to study how the interference between two antennas in a MIMO system affects the linearity of the power amplifiers powering the antennas. For the MIMO system, two power amplifiers and twoantennas were constructed and designed using the software ADS and a software defined radio was constructed using the platform USRP and the software LabVIEW. The result was that the interference between the antennas affectsthe linearity of the power amplifiers powering the antennas adversely and a reasonable theory was that the interaction decreases inversely proportional tothe square of the distance..

Linux is a growing operating system in embedded systems. Today, Linux is not only in heavy servers but also in cell phones, PDAs, cameras and other devices running on battery power. While current technology is more energy efficient, more and more technologies are implemented into a single unit resulting in an overall increase of power consumption.Low power consumption is an increasingly important feature of a system today. Lower power consumption means lower costs, less environmental impact, and longer life for applications that runs on batteries.This work compiles methods to reduce power consumption of Linux systems. The work includes examining whether the available opportunities are platform-specific or of a more general nature.

This thesis title starting from zero alludes to storstadssatsningen's democratic work being accomplished among immigrants in Malmö. My thesis examines which types of political participation storstadssatsningen were trying to increase. The goal was to turn the immigrants into political participants, but in many of the projects the democratic work had to focus on building a ground for democratic participation by bringing isolation to an end and teaching the Swedish language. This may have been the reason that there were not extensive forms of resources to put into projects actually raising the political awareness. Some of the projects can however be said to increase a very large number of types of political participation, both temporary and every day participation.

Popular Culture is inherently political and the connection between popular culture and world politics in particular is something that has been established through years of research by multiple scholars. In this essay, my aim is to analyze how American Power is represented in popular culture. This is done in context of the decline of the American led liberal hegemony and a new Multiplex world order. A world order with multiple influential actors with varying levels of power. To analyze the way popular culture portrays American power, I have used the movie Top Gun: Maverick (2022) as an example and analyzed scenes from the movie.

Vattenfall AB is a large producer of electric energy where approximately half of the energy comes from hydropower. Vattenfall Hydropower has got almost a 100-year old history and the company has developed a lot since 1909. After that the number of power plants increased and the competition got more intense, there were higher demands on the reliability. One way to secure the reliability with a good satisfaction at the power plants is to implement a maintenance method named Reliability-Centred Maintenance. RCM is a result of the introduction of the complex aeroplane Boeing 747 in the 1960?s.

A new FPGA suitable for space applications has just reached the market. To investigate whether there are any possible flaws or limitations similar to those previously seen on FPGAs, an evaluation has to be done. This master thesis contains the evaluation of this new radhard FPGA with focus on possible design limitations and package related electrical phenomena.Areas evaluated: Ground-/VDD bounce, Cross talk, Rise time sensitivit, Power cycling, Power consumption, Place and route tool, Radiation hardnessThis report contains all steps in the evaluation. From method to measurements, comparisons, theory, results and conclusions. In the evaluation work, special effort has been made to develop designs that really stress the FPGA to find potential problems.

The Human Rights claim that all humans have special rights that are not allowed to be broken or violated. Although these rights are broken and violated by states every day. One major fact that makes this possible is the principle of sovereignty that includes all states, and which says that every state has the power and right to make decisions and create laws within the own country without the interference of other actors. In other words, the problem is that the states have to much power in relation to actors usch as the United Nations and to the rules of the Human Rights. This essay describe a possible way to strengthen the power of the Human Rights so that all humans can be guaranteed the fulfillment of the rights..

This bachelor thesis airns to examine change in Common Foreign and Security Policy towardsa Normative Power Europe irnplernented in the Treaty of Lis bon. The survey is conductedwith Ian Manners Norrnative Power Europe theory as the basis. U sing norms identified byManners in his article "Normative Power Europe: A Contradietian in Terms?" (2002) as thetools when analysing CFSP-staternents both from before and after ratification of the Treaty of Lisbon. The norms used in the analysis are Peace, Dernocracy and Human Rights.

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good..

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.