The aim of this study is to understand which strategies helped women escape honourbased violence, by reading the autobiographies of seven women. Honourbased violence is a relatively new problem in Sweden, but it has existed for a long time. According to FN (2012) 5000 women are murdered every year in the name of honour. Honourbased violence is about maintaining the honour of the family. Womens sexuality is connected to men´s honour, and because of that they are not allowed to express it.

This thesis investigates the overall risks of flooding over the Design Basis Flooding Level (DBFL) at the Swedish nuclear power plants (Oskarshamn, Ringhals and Forsmark), using statistical data and methods, but also considers historical events which might affect the overall risk of flooding at the specified sites.Considering the nuclear accident which happened in Fukushima in conjuction with the earthquake and tsunami which struck eastern Japan on 11 March 2011, operators and licensors of nuclear power plants all over the world conducted reviews and investigations on the overall risks posed to the plants from external events. One important such event is extreme water level.One part of the thesis includes an extreme value analysis (using Generalized Extreme Value distribution and Generalized Pareto distribution) of water level data from SMHI (Sweden's Meteorological and Hydrological Institute) measured at stations close to the Swedish nuclear power plants. The results of the statistical studies indicate that considering the return period used in the thesis (100 000 years), the water levels at the Swedish nuclear power plants are not expected to exceed DBFL.The other part of the thesis consists of a historical study of extreme weather-related events. The results of this study indicate that no historical events seem to have occured which would indicate a higher risk of flooding than the one suggested by the statistical study. .

This study will shed light on the subject of system management and system management models. It is important that everyone within an administrative organization understand business objectives and needs of the users who work with the systems. It is vital for the activity to form a structured approach for its management, which includes a system management model. Every company has its individual system management model that is tailored to support their management of a business IT systems. According to Brandt (2000), a system management system model is defined as "an idealized image of how you want the system management work is conducted".

S2 CRM is a Customer Relations Management system built in classic ASP that runs on a web server servicing customers with varying needs. The purpose of this thesis work is to convert parts of the system to the web development environment ASP.NET. The purpose is also to gain knowledge of the framework itself. The ASP.NET environment is compared with another framework, JBoss Seam, in order to understand the differences and to evaluate the possibility of using another framework than ASP.NET, when building the new system. The outcome of this comparison is that although JBoss Seam is just as good, and in some aspects better than ASP.NET, the use of ASP.NET simplifies the continuation of development on the S2 CRM product.

This thesis describes a conceptual design of a support frame for a synchronousgenerator used in a vertical axis wind power plant. In this system the generator isplaced on ground level. The thesis also considers the design of housing for thesupport frame and generator. The concept presented in this report is based on anearlier design. Besides geometric design, simplified simulations has been run in orderto optimize some of the parts included in the construction considering naturalfrequencies and structural strength.The result is presented as CAD-models andan assembly drawing..

This Thesis aims to explore how to integrate an IT-system for facilitating anorganizations work with Continous Impprovements.This is done here by examining and analyzing the process within a handful ofcompanies who seem to have been successful with their own implementations. Thestudy is focused on the implementation of one particular system, "System C2".Simliarities and differences between the companies, and the established rule of thumbfor these kind of activities are focused upon. This to emphasis how another actormight emulate some of the apparent success.Part of the core question is found in the title, since Continous Improvement is oftenseen as a relativly low-risk activity, is it then also possible to take a low-risk slow pathto the implementation of such a system in the entire organization?.

An increasingly globalized market is leading to hard competition among manufacturing companies, which means that they are forced to become more customer focused to survive in the market. A Customer Relationship Management system is a system that will be of assistance to help companies succeed in building long term relationships with their customers. Best of Breed and ERP-based are two types of CRM systems. The study has focused on analyzing and examine the need for CRM systems at manufacturing companies. Our question formulation has been:? What need do businesses want to satisfy with a Best of Breed-based and ERP-based CRM system?? Are there any differences in the use of Best of Breed-based and ERP-based CRM system?In this study, we have chosen to carry out interviews and quantitative surveys with manufacturing companies to get their view of CRM-systems.

This paper describes the design and implementation of an automated build system for the JAS39A simulator FUS39A at HiQ:s offices in Arboga. The assignment was to automate the process in which modules are built; the simulator is composed of a number of modules which are built manually at the end of each week, this process takes about a day of manual labor. The system can automatically build a module as either a scheduled service or by manual invocation. The system contains functionality for reporting the build results to any given recipient by e-mail. The purpose of the system is to free up the time put into manually building the modules for better suited tasks by automating the build of FUS39A.The assignment was split into two parts, an analysis part where information of the old system was gathered, tools and methods were chosen and the new system was designed.

Grid codes are becoming more demanding on power generating units due to the factthat the complexity of the power grid is increasing. The penetration of wind powerhas grown over the last years and it is clear that wind farms need to be addressedwith the same type of grid codes as conventional generation units. There is howeveran undeniable difference between the technology in conventional synchronousgeneration units, and the asynchronous generation units in wind farms.This thesis has reviewed the current grid code in Sweden and compared it to the newcode proposed by ENTSO-E, ?the Requirements for Generators?, in the aspect ofwind farms with an installed power of 30 MW or more. The comparison has beencomplemented by an analysis of how wind farms of two different technologies(Doubly fed induction generators and full power converters) can meet therequirements and technical proposals have been given on how to be able to meetcompliance with the new grid codes.The Requirements for Generators contains many non-exhaustive and optionalrequirements, because of this it has been difficult to, at this stage, exactly point outthe technical impact on the grid connection of future wind farms in Sweden.

Today we live in a world where the demands increase in the aeronautics industry. This creates a situation where no mistakes are allowed about the regulations and for those who are supposed to follow these. Safety comes first, tracking of components, Service Bulletins which are recommendations from the manufactures and Airworthiness Directives which are demands from the authorities, these need to be updated at all time and everything that is done on a aircraft need to be documented.This creates a situation where today maintenance shops need to have full control of all parts of the organization, which creates a need for a working data system.The goal with this exam work is to evaluate the best way to implicate the new bought data system called "System Aircraft Management" on the basis of the needs of Täby Air Maintenance AB. The system are supposed to get started technically and also be implicated to the users of the system. This work will be focused to create a effective working plan to get SAM implicated with no interruption in the daily work.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

Energy efficiency is important both to reduce costs and to reduce greenhouse gas emissions in the atmosphere. Reducing costs will also help maintain business competitiveness.Scania in Södertälje is a company where the optimization of energy use is an ongoing and continual process. One area with potential to make energy and cost savings is the effectiveness of the ventilation systems in offices and industrial premises at Scania. During the summer months an increased demand for cooling occurs, leading to increased ventilation and a peak in district cooling system usage. Sorptive cooling is a technology where the supplied air is cooled by applying external heat.

Unmanned aerial vehicles (UAV?s) are nowadays greatly appreciated. The advantage over manned airplanes are great since UAV?s can be much smaller and therefore lighter. The goal of this project is to evaluate the performance of an environmentally friendly UAV using only lithium-ion batteries.

Our Bachelor´s Thesis has been performed in co-operation with Bors Automation & Tool AB.Our task was to develop a servomotor powered tube cutting-machine with initial point fromtoday's hydraulic driven tube cutting machine Bors HYD 23. The purpose with the newconstruction was to achieve a more power-efficient tube cutting machine which could lowerthe power consumption, and also meet the market continued growing demand forenvironmental-conscious production.Bors Automation & Tool gave us relatively free hands in order to enable new thinking ideaswithout following their traditional constructional solutions.Our solution resulted in a construction based on a power source existing of a servomotordrivenrollerscrew, witch provides a more rational use of energy compared with the currentmethod.Bors Automation & Tool AB has decided to fabricate a prototype of Bors E 23 during theautumn of 2007, which they are planning to revile at the Tube 2008 exhibition in Düsseldorf,Germany.NOTE:Due to an agreement signed by the authors in the beginning of this project, no appendix is published at this time.If you want to wiew these documents, please contact the authors..

One problem in today?s indoor air quality lies within insufficient ventilation. Dynamic ventilation can be obtained by implementing a Demand-Controlled ventilation (DCV) system. DCV systems adjust the ventilation in a building by calculating the impact made by its? occupants.