To achieve an optimal combustion, an even air/fuel ratio in the combustion chamber is required. An optimal combustion leads to reduced amount of emissions due to a more complete combustion, which is an important matter because of the sharpened environmental laws. This can be attained, among other things, by applying entirely variable cam times. To optimize the engines efficiency and its emissions at all workloads and speeds, an active valve control can be applied. This means that the intake and exhaust-valves can be opened and closed at any time, independent of the crankshaft position.

Changes in swallowing function are common in elderly and chronically ill individuals. Therefore it is important to be aware of these changes and their prevalence. The aim of this study was to assess the prevalence of dysphagia in nursing homes in the municipality of Linköping, and to correlate dysphagia with variables that can be a cause or a consequence of dysphagia. These variables were gender, age, MMT-result, dentition, weight loss, medical diagnose or number of medications. The intention was also to examine the additional information regarding dysphagia supplied by pulse oximetry.Sixty nursing home residents aged 74-101 years were chosen to participate in the study.

As I recently started to record in a studio, I almost immediately came to the conclusion that getting the right sound is not easy. I became curious about my recording procedure. What did I do wrong? How to place the microphone? Use of equipment? How is it possible to modify the sound afterwards? Are there any special methods that are commonly used among producers and/or guitarists? My thoughts ended up in a question ? What do producers and guitarists think of the guitar sound during a recording session in relation to the final production? In my research I interviewed two producers and two guitarists about guitar recordings. The results show that the quality of the guitar sound is in relation to production and style of music.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

Abstract The purpose of this paper is to investigate teachers´attitudes to and work with outdoor education in preschool. The aim is also to identify the opportunities and barriers that exist to conduct outdoor education. In my research I have interviewed six preschool teachers in a medium sized municipality, where five of the teachers worked in the suburbs to the Big City and one teacher worked in the downtown Big City. All respondents in the study were in favor of conducting outdoor education. The respondents claimed that it promoted children´s health and motor skills. The result also shows that the teachers saw a great opportunity for learning related to outdoor education, by using the resources of nature.

Background: Knatteskutt is one of the largest organizations in children's sports. Operations are located in approximately 150 cities / areas and have both sports and dance focus. The children are aged 3-7 years and may try several sports activities or dance styles during the semester, focusing on play and motor skills. All who are leaders at Knatteskutt has undergone Swedish Sports Promotion of Child Leaders Training. There are also regional managers around Sweden is as a sounding board for leaders and as an extended arm between the office and the leaders.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

Background Children spend much of their time outdoor at preschool. Preschool's mission is to provide children with a rich environment that is enjoyable, and that arouses their interest to learn new skills. Since motor skills and health are positively affected by the outdoor environment should kids get a good turnout at their preschool playgrounds as possible.Theoretical perspectives My study is based on theories from a socio-cultural perspective. The socio-cultural context is part of the outdoor environment because we experience and perceive nature depends on the society we live in and how we interact togetherPurpose I want to see what kind of vision teachers and parents have on the outdoor environment when it comes to children's learning and development. I also want to find out how the teachers are using the outdoors environment and find out the parents' reason, when it comes to choice of preschool.Methodology The work is based on qualitative interviews with two teachers and two parents from each preschool.

Elanvändningen till ventilation har ökat med 40 % sedan 1990 i Sverige. Ventilationen är en miljöbov enligt undersökningar som visar att elanvändningen till ventilationssystemens fläktar kan reduceras. Minskning av elförbrukningen kan t.ex. uppnås genom utbyte av fläktmotor till en EC-motor eller till en fläkt med bakåtböjda skovlar och direktdrift. Effektivieringsåtgärder kan ge en lägre elförbrukning på upptill 50 % i vissa applikationer.Ventilationsfläktarna i Sverige förbrukar 12,3 TWh per år.

SammanfattningFöretaget Infinigear AB driver i samarbete med KTH ett utvecklingsprojekt med inriktning mot en steglös växellåda för tyngre fordon. En viktig komponent i växellådan är en koppling som används till växellådans momentöverförande kedjehjul. I ett tidigare studentprojekt har en prototyp av kopplingen konstruerats för att klara av i- och urkoppling med 50 Hz och momentet 250 Nm. Under studentprojektet testades kopplingen för det statiska momentet med lyckat resultat. Däremot utfördes inga prover med högre frekvenser vilket är syftet med detta examensarbete.

En billig och robust motor av stirlingtyp har konstruerats för användning i villor. Som energikälla används de heta rökgaserna från förbränningen i husets panna. Motorn driver en generator i permanent drift under den kalla delen av året då värme- och energiförbrukningen är som störst i vårt land. Under den varma årstiden finns den tillgänglig som reservkraftverk. Tanken är att stirlingmotorns värmare ska placeras i en villapanna för att ta till vara exergipotentialen hos dess höga temperatur.

SammanfattningFöretaget Infinigear AB driver i samarbete med KTH ett utvecklingsprojekt med inriktning mot en steglös växellåda för tyngre fordon. En viktig komponent i växellådan är en koppling som används till växellådans momentöverförande kedjehjul. I ett tidigare studentprojekt har en prototyp av kopplingen konstruerats för att klara av i- och urkoppling med 50 Hz och momentet 250 Nm. Under studentprojektet testades kopplingen för det statiska momentet med lyckat resultat. Däremot utfördes inga prover med högre frekvenser vilket är syftet med detta examensarbete.

During the 1930´s the hot potato for the Swedish lighting associations were how to create the most suitable light for every situation, either for industries, offices or homes. The light bulb were the most frequently used source of light but due to limitied luminous intensity, big halls sometimes required up to hundreds of light bulbs to produce the right amount of light. Two kinds of different lights, by different reasons, can be titled the predecessors of the fluorescent lighting during the 1930´s: The volfram-filament tube light due to its estetic similarities and the electric discharge (mercury- and sodium-) lamps due to its technical resemblance. Even though they came in quite wide use (the volfram tube in public halls (e. g.

One of ABB Power Systems´s business areas is HVDC (High Voltage Direct Current) technology. HVDC is used for transmissions for both short and long distances. One of Power Systems?s products is called HVDC Light. HVDC Light is a relatively new technology for power transmission, but have before only been used for motor drives applications.

This report will show the energy usage of Hotel Princess in Sandviken, Sweden. When the hotel changed owner an examination of the hotels heating, ventilation and sanitary systems were done. The report showed flaws in the ventilation system, and is why the new owner wanted a closer look at the energy use of the hotel. The original building was built in the 1930s and two major extensions have been built, one in the 1950s and the most recent in the 1980s. An assumption made is that the building parts were built to the restrictions during the time. Activities on the hotel include sleep over, conference, night club, massage and swimming in the hotels pool section.